Floor-standing gas boiler Siberia: how it works, technical characteristics, as well as reviews and operating instructions

Autonomous heating systems demonstrate the greatest efficiency if they are based on gas boilers.

It is customary to classify the products of European companies as the highest quality and most reliable units, although there are serious complaints about them regarding the excessive sensitivity and fragility of some important components.

Recently, significant competition for these models has come from gas boilers from domestic manufacturers who have managed to find their own approach to creating heating equipment.

The driving idea was the exclusion of unreliable elements from the design, the rejection of all components without which the unit is capable of operating.

Let's consider the floor-standing gas boilers of the Russian] Siberia [/anchor], which have managed to provide a serious alternative to imported models.

Floor-standing gas boilers Siberia

Siberia gas floor-standing boilers are produced by Rostovgazoapparat CJSC. The brand was created on the basis of previously produced gas heating boilers, the design of which was modified, improved and optimized to the maximum.

The main idea professed by the developers was to create a maximally independent unit capable of operating in difficult conditions and not requiring electricity.

For our country, this approach turned out to be the most correct, and the low cost of boilers immediately created stable demand.

The units all have an atmospheric (open) burner, which places increased demands on the organization of air exchange in the room where it is installed. Smoke removal occurs naturally, so drafts or sudden changes in air flow are unacceptable - they create a danger of flame failure or smoke in the room.

A heat exchanger made of cast iron or stainless steel allows heating of the coolant with high efficiency - efficiency is up to 90%.

Main advantages

According to the manufacturer, Siberia gas floor-standing boilers are a new generation of heating units designed to provide heating and hot water supply to the home. Compared to imported competitors, boilers of this brand have the following advantages:

• A wide range of models that can satisfy any consumer demand.
• Automated control system, which ensures ease and safety of use.
• Economical.
• Trouble-free operation even in the harshest operating conditions.
• Availability of service support.
• Affordable price.

Now, analyze each point of the above advantages in more detail, because only the reliability of the facts will allow the domestic consumer to consider the equipment of this brand as a candidate for purchase.

Types

According to the set of functions, Siberia boilers are divided into two large groups:

• Single-circuit . They provide only the preparation of coolant for the heating system.
• Dual-circuit . Capable of simultaneously heating coolant and hot water.

The first group has the simplest design, and the second has an additional heat exchanger.

The issue of heating hot water is solved simply - the hot coolant that has just left the heat exchanger enters the secondary one and transfers some of the thermal energy to the water.

This method does not require significant design complexity, which allows you not to increase the price and get maximum benefit from the operation of the unit.

Reviews of Siberia boilers

Vasily Pskov Review: positive

Last year we finally completed our own house, and it was time to carry out communications and interior decoration. The first issue that arose was heating.

They began to select a boiler, the requirements were as follows:

Our boiler, even before installation

• Economical and reliable (like everyone else, we don’t have extra money);
• Gas (main gas was recently supplied to our village, this, in fact, led us to the idea that it was time to build);
• Floor option with natural draft. Here I want to tell you in more detail. We have read many times on the Internet laudatory reviews about turbocharged boilers; they don’t seem to need a chimney. But the builders clearly stated: the gas boiler must be in the boiler room, and the chimney must be vertical. We are people of the old formation, we are also accustomed to the fact that smoke comes out through the roof, so we agreed, especially since the boiler room was already in the project.

The same builders installed the heating system, and they advised us to buy a Siberia boiler. We decided to trust them and did not regret it. The Siberia 23 model suited us in terms of area, but the price was less than 20 thousand, which suited us quite well.

After a year I can say: a beautiful floor-standing boiler, looks like a refrigerator, the burner and automation are Italian, they say they are good. Most likely, this is so, in any case, heating costs in winter did not exceed 2,000 rubles per month. Neighbors say they have more.

We survived the winter calmly, it was warm and cozy, so we definitely recommend to anyone interested in what to install for heating - take Siberia, you won’t regret it.

Dmitry Novgorod Review: positive

I service several nearby holiday villages and install heating systems. Now many people are insulating their homes and converting them for permanent residence. Clients are different, some want something cooler and more expensive, while for others the main thing is a low price with normal quality.

With the first, everything is simple - I install Baxi or Ferolli for them, but for the second, I didn’t immediately find what I needed. I have tried many manufacturers, and now I offer Siberia gas boilers. Normal devices are made in Russia, but the filling is all imported, so the price is reasonable and the quality is quite decent.

Basically I set the Siberia model to 17 or 23 (the number in the name is the power in kilowatts). If, in addition to heating, you also need to supply hot water, then I suggest dual-circuit analogues (they have the same name, but have the letter “k” after the number). I’ve been working with them for two years now, and the reviews so far have been only good – both mine, as an installer, and those who directly use them.

Pavel Arkhangelsk Review: positive

For about twenty years we have been using the AOGV-80 boiler, a bestseller from the times of the USSR. The area of ​​the heated room is 60 m2. Last year it was time to buy something new, because the AOGV was almost completely burned out, and the automation had not worked for a long time, all modes had to be set manually.

Friends advised us to install a Siberia brand boiler. It seems to be made by the same plant, but the parameters are much better, the automation is imported, and the efficiency according to the passport is 90%.

It met all the parameters - a floor-standing gas boiler, it works with natural circulation, so the heating system, assembled in the last century, did not have to be changed. It does not require an electrical connection, and the reviews are also good. In general, we decided and installed it.

After a year, we can safely say: Siberia is a good option for replacing AOGV. Reliable, economical, looks great. Heating costs immediately decreased noticeably (on average, by one and a half times). Apparently, the automation is really good.

Leonid, Moscow Review: positive

I am remodeling a country house for year-round use. The situation just so happens that the children are growing up and will soon live on their own, so we need to vacate the apartment. I started with heating three years ago. Then for the first time it became known that main gas would be supplied to our SNT. Therefore, I decided to install a temporary electric boiler, and when gas appeared, change it to a gas one.

Time flew by, gas was installed three months ago. Of course, we paid a fair amount of money for the connection, but we hope that it will pay off by reducing the monthly cost of heating. We began to look for an inexpensive, economical boiler with good efficiency. We looked through many manufacturers, and eventually settled on a Rostov-based unit called Siberia 23. This is a floor-standing boiler designed for an area of ​​up to 250 square meters.

Why him? Price – less than 20 thousand, designed for a regular chimney, efficiency – more than 90%, user reviews are positive. These parameters turned out to be decisive.

After the purchase, however, we encountered some surprises. The fact is that before this we were heated by an ordinary stove with a brick chimney.

So, just in case, I want to warn you, maybe it will be useful to someone: it turns out that gas boilers cannot be discharged into a stove chimney.

To be honest, I don’t remember the subtleties, but the point is that it destroys him. To heat with gas, the chimney must be lined - a metal pipe is inserted into it. This came as a complete surprise to me and I had to incur unforeseen expenses.

Otherwise everything is fine. My Siberia is standing, warming the house, the heating costs after electricity bills are incredibly pleasing. So I recommend it to everyone: pay attention to the products of the Russian manufacturer. Before buying a German or Italian boiler, think about Siberia (that’s the name of this brand) - you’ll save money and won’t lose on quality.

Vyacheslav, Ryazan Review: positive

We have been living in our own house outside the city for four years now. Before this, it took a long time to build and equip life support systems. I want to talk about how the heating system was made.

Siberia 11K

To design and install it, they called in specialists who offered to install a gas double-circuit boiler. This is a universal solution that provides both heating and hot water at once. For a small number of residents (my wife and I are two, sometimes our son comes) such a unit is quite capable of providing the necessary flow of water and coolant.

The installers recommended Siberia 11K as a specific model suitable for our conditions. They said that they had already installed several such boilers, and there were no difficulties during installation or use. Just in case, we read the reviews on the Internet, everyone seemed to be happy too, so we agreed to this option.

It turned out that the boiler was really good, it worked the first time and, importantly, was in good standing with the gas workers, so there were almost no problems with connecting and handing over the facility.

But after two and a half years, the first problems began: the gas ignited for the second or third time, often failed, and sometimes some popping and crackling noises were heard. We were upset and thought that we had bought a Russian-made boiler in vain. They called the service representatives and the problem was resolved within half an hour. It turned out that the filter was clogged, they cleaned it and everything worked. The repairmen said that Siberia boilers are very easy to maintain; if you have some experience, you can even do it yourself. Next time I'll definitely try it.

Since then, everything has been working without failures, it heats well, and there is always hot water. Overall, I can recommend this brand for anyone who needs an inexpensive floor-standing boiler.

Advantages and disadvantages

The advantages of Siberia floor-standing boilers are:

• Simplicity of design, reliability and reliability.
• Lack of expensive electronics.
• Complete energy independence of the units.
• Compact, small size and weight.
• Low gas consumption.
• The prices of Siberia boilers are approximately half that of their European counterparts.

Flaws:

• The complexity of ignition, requiring a certain sequence of actions.
• For maximum efficiency, an external circulation pump is often needed.
• Natural draft is unstable and highly susceptible to external influences - drafts, gusts of wind, weather changes negatively affect the smoke removal system.
• The need to obtain permission from gas workers for installation.

IMPORTANT!

The disadvantages can be considered design features, since they are present not only in Siberia (Siberia) boilers, but also in all non-volatile units without exception.

How to choose a gas boiler

First you need to decide on its power. The larger the room, the more power the speaker will need.

For every 10 sq. m. needs 1 kW of energy. In order for the device to work longer, you should not purchase it one-on-one with the calculated power

It is better to take with a reserve of 1/3.

It is important to take into account climatic conditions, as well as the decoration of the house. If the house is insulated, then heat loss will be less

Accordingly, a less powerful boiler will do.

You also need to take into account what it is needed for. Only for heating or for the availability of hot water.

If the equipment will be installed in an apartment, it is recommended to use a wall-mounted speaker, and if in a house, then it is better to use a floor-standing speaker. But it still depends on preferences, and, of course, on the size of the heated area.

For long-term operation, the type of heat exchanger is important. If it is cast iron, then this is only a guarantee of durability.

What series and models of the company exist?

There are three model lines:

• AOGV. Single-circuit floor models used only for space heating. They have 5 models with power from 11 to 35 kW. They are simply marked Siberia 11, Siberia 17, etc.
• AKGV. Double-circuit units providing heating and hot water supply. They have the same power models, the marking contains the letter “K” (combined) - Siberia 17K, Siberia 23K, etc.

NOTE!

Both groups (AOGV and AKGV) are equipped with a primary heat exchanger made of stainless steel. Double-circuit ones have a secondary plate heat exchanger for heating hot water.

• KCHGO. Increased power models with cast iron heat exchanger. The power range is between 16-50 kW.

The power of the boiler determines the area that it is capable of heating: 11 kW - 110 m2, 35 kW - 350 m2, etc.

Special features of the automatic system

As mentioned above, all products are automated and have a number of special features:

• The Italian Eurosit system controls the temperature;
• The automated system has a piezoelectric ignition function;
• Automation blocks make it easy to control the system;
• Mechanism of draft and flame control;
• The automatic system optimally consumes gas through the optimal choice of burner function;
• No need to control the process of the combination valve;

All systems are independent of energy, so there is no need to connect to the electrical network, and this is very important for Russia. Constant network failures disable all heating systems

Burner: basic operating functions

The Siberia heating system burner differs from its competitors in its operating features:

• The system is made of stainless steel, so even at low gas pressure there is no burnout.
• The burner is made in Italy.
• The system is made from environmentally friendly materials, so there are no harmful substances in the exhaust gases.
• The burner is very easy to use. You don't need any skill to replace or clean the system.
• At the time of replacing the igniter and the main part of the burner, the system runs on liquid fuel.

A few words about the power that each system has its own. To figure out how much power is required for an area, you can calculate it - take 10 square meters. m per 1 kilowatt. This calculation says that the system will work to its maximum, so add 0.3 to the resulting figure. If you need to warm up a room of 100 sq. m., then you better choose the 11th model Siberia. Moreover, when choosing a heating system, you need to choose design features - material, location, finish. For less insulated rooms, you need to calculate 1.5–2 kW per 10 square meters. m., for warm rooms - 0.5–0.7 kW.

If you want to use the Siberia boiler not only for heating, but also for supplying hot water, then it is better to buy boilers with the letter name K. If you buy the boiler model K, then such a system can provide all the hot water needs for several people. If more than three people will use hot water, then you need to buy a powerful boiler.

How much space is needed to install the boiler?

wall and floor heating systems can be used

The boiler room may not be heated

It is also important to consider that more powerful Siberia models make noise during operation. Some manufacturers produce powerful floor systems with excellent heat and sound insulation, which are installed outside the boiler room - in the hallway or kitchen

Additional details of the system are:

Additional details of the system are:

• Cranes;
• Expansion tank.

How to save on heating?

Without the slightest loss in comfort, you can reduce fuel costs by 10%. Especially if you have a private house and you are going to carry out major renovations. The initial costs can be recouped even with basic tariffs, and the price of fuel will rise. Your invested money will pay off even faster.

The very first thing you can do is reduce the heat loss of the building. This is a whole range of works, installation of doors and windows, insulation of walls

After all the work has been carried out, thermal monitoring must be performed: it is important to check that heat does not penetrate through the cracks. There are special companies that check losses using thermal imagers

And the owner of a private house can purchase a remote thermometer

It is also very important to choose a boiler based on power and positive reviews. The more square meters you need to heat, the more carefully you need to pay attention to the heat calculation. And the owner of a private house can purchase a remote thermometer

And the owner of a private house can purchase a remote thermometer

It is also very important to choose a boiler based on power and positive reviews. The more square meters you need to heat, the more carefully you need to pay attention to the heat calculation. On the heating systems market, the Siberia brand is one of the best

Systems with high power are very expensive, but consumer reviews are still positive. They evaluate the quality of use and technical properties of heating devices

The Siberia brand is one of the best on the heating systems market. Systems with high power are very expensive, but consumer reviews are still positive. They evaluate the quality of use and technical properties of heating devices.

Specifications

Let's look at the parameters of Siberia floor-standing boilers:

The lineup

Siberia boilers are products of JSC Rostovgazoapparat, a large Russian manufacturer. In general, this plant’s product range includes three lines of heating gas boilers. Siberia (Siberia) is only one of them. These are floor-standing gas water heating boilers for domestic use. Available with steel and cast iron (the abbreviation KCHGO is added) primary heat exchangers. The Siberia line of boilers with steel heat exchangers includes modifications with the ability to heat water for domestic needs (DHW). The letter “K” has been added to the abbreviation of these models.

Floor-standing gas boilers Siberia: with steel and cast iron heat exchanger

Unlike foreign analogues, the Siberia gas boiler was developed taking into account the real state of affairs in our country. It is equipped with non-volatile automation and can operate at low or high gas pressure. The equipment is designed for trouble-free operation for 10 years. After this, testing needs to be done. Based on its results, either a permit for further operation is issued, or a conclusion on the need for disposal (handed over for scrap metal).

Note! Only water is used as a coolant in Siberia boilers. The use of antifreeze by the manufacturer is prohibited and may result in leaks.

With steel heat exchanger

Floor-standing gas boilers Siberia (Siberia) with a steel heat exchanger are highly efficient - the declared efficiency is 90%. Carbon structural steel is used to manufacture the heat exchanger. The body is thermally insulated with basalt fiber, which reduces heat loss due to unproductive heating (so as not to heat the boiler room).

Technical characteristics of floor-standing gas boilers Siberia with steel heat exchangers

This line includes boilers with capacities from 11 to 35 kW. They can heat areas from 100 to 350 m

². When preparing hot water, the flow rate can range from 3.8 l/min (Siberia 11 K) to 8 l/min (Siberia 29 K). You just need to take into account that these are data when heated by 35 degrees from the original value. If the supplied water is colder, then either it will be underheated (below 40°C), or the water flow will need to be reduced.

If we talk about the features of the models in this line, the Siberia 11 and 11K, as well as the Siberia 17 and 17 K boilers can operate on both natural and liquefied gas. They are supplied from the factory with settings for mains gas. If necessary, it is necessary to reconfigure the burner. How to do this is described in detail in the instructions for the boiler. Other models operate only on mains gas.

With cast iron heat exchanger

A cast iron heat exchanger is more resistant to the quality of the coolant. Gas boilers Siberia KCHGO (cast iron) use thin-walled cast iron heat exchangers produced by Viadrus (Czech Republic). They are cast from gray cast iron, wall thickness is 4 mm, the maximum pressure they can withstand is 4 bar. To extend service life, they are treated with an inhibitory compound that protects against corrosion. The service life of the heat exchanger is 25 years.

Have greater power and dimensions

The high-performance Polidoro gas burner is made of heat-resistant stainless steel. All modifications, except Siberia Ch16, run only on natural gas. Siberia KCHGO 16 and 16 E can operate with bottled gas or supplied from a gas holder. The entire line is heating only; for hot water supply, other equipment must be installed.

Technical parameters of Siberia boilers with cast iron heat exchanger

These floor-standing gas boilers Siberia are more powerful. The lowest-power model has a power of 16 kW and can heat from 100 to 200 square meters. meters of area. The most powerful boiler - Siberia KCHGO 50 can be used to heat a house up to 600 square meters. There are also boilers with a capacity of 25 and 40 kW. So you can find heating equipment even for a large cottage with all the outbuildings.

As you can see, there are two modifications - non-volatile and connected to the mains. In the second case, the automatic is 820 Nova mv, the letter “E” is added to the name of the boiler. In this modification, an indirect heating boiler and a remote thermostat can be connected. In addition, it is possible to combine boilers in a cascade (for heating large areas).

Automation capabilities

Any gas floor-standing boiler Siberia is equipped with automatic equipment, which consists of:

• gas block;
• traction sensor;
• pilot burner (pilot);
• thermal breaker;
• piezo ignition;
• control thermostat;
• limit thermostat.

The automation of Siberia gas boilers looks something like this.
These devices provide control of the following parameters:

• Control and stabilization of gas pressure ranging from 65 mm water. Art. up to 280 mm water. Art. When the pressure drops below 130 mm. water Art. The burner power decreases proportionally.
• Maintaining the specified temperature of the coolant in the system. It can be heated to a maximum of 90°C (±5°C).
• Turning on the main burner if the pilot burner is on.
• If there is no flame on the pilot burner, the boiler goes out.
• Traction control. For normal operation, a vacuum in the chimney of 4 to 40 Pa is required. If the thrust does not meet these parameters, the gas supply is cut off.
• Gas temperature control. When the temperature rises above 110°C, the automation shuts off the gas and the boiler goes out.

As you can see, all the necessary parameters are controlled. According to reviews, the automation works reliably, but the requirements for proper installation must be met and the chimney must be properly arranged. Also, for normal operation of the equipment, a constant supply of air is necessary. Supply ventilation must be equipped or the transom/window must be open.

Device

The design of Siberia floor-standing boilers consists of:

• Primary heat exchanger.
• Secondary heat exchanger (for dual-circuit units).
• Three way valve.
• Gas equipment (valve, stabilizer, filter, etc.).
• Piezo ignition unit.
• Gas burner (pilot and main).
• Gas pressure stabilizer.
• Control devices - thermometer and pressure gauge.

The main functions are performed by the burner and the heat exchanger, where the coolant is heated.

Then it is either immediately discharged to a three-way tap (single-circuit models), or it first passes through a secondary heat exchanger and heats the hot water.

After this, the liquid in the mixing unit receives the set temperature and is discharged into the heating circuit.

The movement of flows is carried out by gravity, under the influence of thermal movement of layers of liquid.

Smoke and combustion products are removed using the same method..

Model overview

Products of the Siberia brand are available in several modifications , but the Rostovgazoapparat products have one thing in common - the installation method, all Siberia boilers are installed on the floor .

There are 9 main Siberia models - 11, 11K, 17, 17K, 23, 23K, 29, 29K, 35. Each modification has its own values ​​​​in terms of power, size, gas consumption, etc. (see table):

All models of Siberia floor-standing boilers have the same height and depth. Height - 850 mm, depth - 650 mm. , but the width may differ.

As for power, each model has its own parameter.
What do you need to know about the boiler power when choosing a specific model? The table shows its own value for each modification; it depends on the area of ​​the room that needs to be heated. To understand what area what power is suitable for, you need to make a simple calculation - take 10 sq. for 1 kW. m . But this calculation assumes that the boiler will operate at maximum, so the resulting value must be increased by 0.3. For example, to heat a room 10 Ov. m. the 11th Siberia model is suitable.

An article on the use of diesel boilers for heating a home is located here:

In addition, when choosing a boiler model, it is worth taking into account the features of the building - material, finish, location. For poorly insulated rooms, the calculation should be made in the ratio of 1.5−2 kW per 10 sq. m., for “warm” buildings - 0.5-0.7 kW.

If you plan to use the boiler not only for heating, but also for hot water supply , then preference should be given to models with the letter value “K”. For example, the 11K boiler model is capable of meeting the hot water needs of 2-3 people, delivering 3.8 l/min. Accordingly, a larger number of consumers require a more powerful boiler.

Naturally, more powerful Siberia boilers have a higher cost. The price range is approximately as follows:

This material will help you decide on a gas boiler:

User manual

Operating Siberia boilers is not difficult at all . The owner’s only task is to maintain the cleanliness of the unit and the absence of soot, soot or ash inside the unit. Changing the mode is done by turning the knob to the desired position.

In order to light the boiler, you need to press the handle, pushing it all the way, while simultaneously pressing the piezo ignition button.

Hold in this position for some time (up to 1 minute) until a flame appears on the pilot burner.

Then the control knob is switched to the desired operating mode, which will cause the flame on the main burner to light up and heating of the coolant will begin.

The system is filled with water with the make-up tap open. The process lasts until water flows from the signal pipe, after which the tap is closed.

Download instructions

Download instructions for the Siberia floor-standing gas boiler.

The most common problems and breakdowns

It is clear that there is no perfect equipment and it breaks down or does not work as it should. In most cases there are specific reasons for this. Based on the operating experience of Siberia boilers, we can identify several characteristic problems that owners often encounter:

• Low heating of water for domestic hot water supply by Siberia double-circuit floor-standing boilers. There's nothing you can do about it - it's not their strong point. If you look at the technical specifications, the maximum hot water flow is very small. And this is at normal gas pressure. If the pressure is low (which usually happens in cold weather), then the water will be slightly warm.
• The water at the boiler outlet does not heat up to the stated 90°C (if you turn the regulator even to the very last, 7th position). There are several possible reasons. The first is low gas pressure. When the pressure drops below 130 mm. water the column's power decreases proportionally. When you call the gas service (they are responsible for the nominal pressure), ask them to clean the inlet filter. If it is clogged, the pressure will be low. The second possible reason is a burner clogged with soot and dust. It needs to be cleaned once a year. If this is not done, the efficiency decreases and the Siberia boiler heats worse.

  
  They differ in the heat exchanger material - steel and cast iron

• The pilot burner does not ignite the working burner. Again, there may be several reasons. And the first is low gas pressure in the pipe. But this time it is below 50mm. water pillar At this pressure the boiler does not start. The second reason is a clogged gas valve. The third is a smoked burner. In all cases, we clean the valve and/or burner. Fourth, the thermocouple sensor is located too far away (you can see it visually, if it doesn’t reach the flame, that’s the reason). In this case, you need to loosen the thermocouple mounting nut and move the contacts a little closer. Fifth - weak traction.
• After a summer of inactivity, it is difficult to start the boiler. During downtime, air collects in the gas supply pipe. Until it is “corroded”, it will not be possible to light the boiler. When igniting for the first time, open the window/vent and monitor your health. Take a break between launch trials. During this time, the burner will be ventilated and the Siberia floor-standing gas boiler will start up faster.

As you can see, there are a lot of problems, but most of them are related to the peculiarities of the work of public utilities in our country. Of course, there are reasons in the equipment. But this is a small part of the total number of cases of non-working equipment. In order for the Siberia floor-standing gas boiler to work without problems, it is worth fulfilling all installation requirements and carrying out regular maintenance.

Price range

The cost of Siberia floor-standing models depends on the power and set of functions of this unit.

The general range is between 20-65 thousand rubles. At the same time, the delivery set includes only the boiler, gasket, instructions and packaging. The chimney and other additional accessories (if needed) will have to be purchased separately .

IMPORTANT!

It is not recommended to save on concluding a warranty agreement. It’s not that expensive, but it will allow you to quickly and freely solve a lot of problems.

Cost-effectiveness of models

All Siberia gas boilers, reviews of which are widely presented on the Internet, use natural gas as a source of thermal energy. Some models - for example, the Siberia 17k boiler (reviews of which can be read on our website) can also use liquefied gas fuel for their operation.

To switch to another type of fuel, you will need to change the gas burner. This may be relevant if there are interruptions in the supply of main gas.

Gas consumption will depend on the power of the Siberia gas boiler, reviews of which are largely determined by its “gluttony.” On average, Siberia boilers consume about 1.2-3.7 m3/hour.

If we are talking about liquefied fuel, then the consumption is in the range of 1-1.2 m3/h.

The efficiency of Siberia floor-standing gas boilers, reviews of which are largely determined by this parameter, is quite high - 90%.

More on this topic on our website:

1. Gas boilers Lemax - technical characteristics and user reviews The domestic manufacturer of gas boilers Lemax is considered one of the largest in the country. The company traces its history back to 1992. Initially the organization...
2. Gas boilers Vaillant - technical specifications and reviews from owners The first models of Vaillant heating boilers appeared in Russia only 15 years ago, although this brand is already well known in the world…
3. Baxi double-circuit wall-mounted gas boilers - owner reviews and technical characteristics The Baxi company was founded back in the 19th century, and today Baxi devices are recognized by many as one of the best in the industry...
4. Gas boilers Proterm Bear 30 KLOM - technical characteristics and features Heating boilers “Bear” from the Slovak manufacturer Protherm are completely independent of electricity; the source of thermal energy is gas fuel. Proterm Bear 30 KLOM…