Homemade machines and devices for the home workshop: popular options

Homemade machines and devices for the home workshop

Before selecting a set of homemade machines and accessories for the garage, it is necessary to create optimal working conditions. In this case, the size of the room must be at least 6 square meters. m. You can attach an additional room to the garage or to the house. It is important to decide what types of work you will carry out, as well as make a list of equipment and necessary tools.

A compact workshop can be set up in a garage

It is most convenient to organize storage of some types of tools on the wall. This will save space. It is also convenient to use racks and shelves. To save useful space, it is worth making universal devices that combine several functions. The table should be equipped with drawers, and also used as a carpentry workbench.

Ergonomic design of the desktop allows you to place the maximum number of items

When choosing homemade machines and devices for your home workshop, you can select different types of mini equipment. For working with metals, the following options are used:

• grinding equipment is used for processing metal surfaces: grinding, polishing and sharpening. Its manufacture requires a minimum number of components and parts. The equipment includes sharpening stones and an electric motor. For the stability of the device, mounting elements are used;

Grinding equipment option

• A milling machine is used to drill holes. In the manufacture of such a lifting mechanism design, a steering rack is used. In addition, you can install an angle milling machine.

Professional version of this design

For wood processing, various homemade tools and do-it-yourself devices are used. The most commonly used types are cutting, turning and grinding. With their help, you can perform all types of work at home. The following equipment is used for wood processing:

• cutting machines . The simplest device is an electric or chainsaw. Such units can be disk, belt, or chainsaw sawmills. When making homemade equipment, it is worth considering the diameter of the disk, as well as the width of the cutting part;

Simple cutting equipment

• grinding device. The simplest option is made from a stable table, a vertical grinding shaft and an electric motor. An abrasive belt is used to process the ends of wood blanks.

Grinding device

Related article:

Woodworking machines for the home workshop. Specialized equipment with an electric drive greatly simplifies the processing of wood blanks. But acquiring it involves significant investments. To successfully solve this problem, you should carefully study the materials in this article.

DIY tool shelves: popular designs and manufacturing

It is worth noting the following options for storing tools:

• racks;
• hanging shelves;
• wall structures;
• shelves in the form of shields on which small tools can be mounted.

Unusual shelves for storing tools

You can make a panel shelf for a tool with your own hands like this:

• cut out a shield from plywood and mark the places where the shelves will be installed;
• make shelves with side walls, the length of which should correspond to the length of the shield;
• the shelves are fixed to the panel using self-tapping screws;
• hooks are mounted, which are equipped with a special thread;
• The brackets are being installed on the back side of the shield.

This way you can make a simple panel structure, which will allow you to put your workshop in perfect order.

For your information! Panel shelves are functional. You can attach hooks or special holders to them. An additional lamp can be hung above such a structure. In this case, you can use a small light bulb.

Designing a carpentry workbench with your own hands: drawings, video

Let's start learning about useful DIY household gadgets from the workbench. This useful unit comes in the following varieties: stationary, mobile and folding.

The diagram shows the main elements of such a workbench

Remember that a do-it-yourself folding workbench drawing should contain the following details:

• a working surface, to create which you will need a board at least 6 cm thick. In this case, hornbeam, beech or oak are used. You can use boards painted with drying oil;

Special drawings will be required to carry out the work.

• a vice structure is mounted on the top cover;
• The supporting legs of the workbench are made of pine and linden. Longitudinal connecting beams are placed between them to ensure stability of the entire structure;
• Shelves for tools are mounted under the workbench.

The diagram shows how to correctly assemble such equipment

You can watch how to make a simple workbench in this video:

Technology and drawings of a do-it-yourself carpentry workbench: simple design

To make such a device, you will need drawings with the dimensions of the carpentry workbench.

In this photo you can see how the folding structure is made

Let's look at how to build such a device:

• To make the lid you will need thick boards. The dimensions of the shield should be 0.7 * 2 meters. Long nails are used for fastening;
• the roof is finished using timber;
• depending on the dimensions of the carpentry workbench, vertical supports are used;
• The height of the working surface of do-it-yourself carpentry workshop tools is determined. Markings for the beams are applied on the ground where these elements are buried;
• The workbench cover is being installed. The support bars are attached in pairs. In this case, long self-tapping screws are used.

Homemade design option

Features of creating and designing a wooden workbench with your own hands

You can buy a wooden workbench or make one yourself. Additionally, the structure can be equipped with drawers. So, let's look at the manufacturing technology:

• vertical supports are fixed using horizontal jumpers. They make grooves for connecting fittings. In this case, a chisel and a hammer can be used;
• When the jumpers are installed at the required level, holes are made in the bars on the support. Then the bolt is mounted, after which the elements are tightened;
• horizontal jumpers are installed two pieces on each side. Parts under the countertop will be required for installation above the work surface;
• bolts are used to secure the work surface. Holes for fastening elements are drilled on the tabletop. The bolts are mounted so that the bolts are recessed.

Wood construction drawings

You can easily make a belt sander at home. In this case, you will need an emery cloth and a sanding belt. Its sticker is applied end-to-end. To strengthen the seam, it is necessary to place dense material under the bottom. In this case, you should not use low-quality glue.

Ready frame for the table

The diameter of the tape shaft should be several mm wider in the center than at the edge. To prevent the tape from slipping, it is necessary to wind it with thin rubber. For the manufacture of grinding devices, you can select designs such as planetary, cylindrical grinding and surface grinding.

Technology for making a carpenter's vice for a workbench with your own hands

For workbenches, you often make a vice with your own hands at home. The video allows you to see this process:

To make such a design you will need special studs. To work, you will need a screw pin with a thread. You also need to prepare a couple of boards. One element will be fixed, and the second will move. When manufacturing, it is necessary to use drawings of a vice with your own hands. In each of the boards it is necessary to make holes for pins, which are connected with nails. Then screws and nuts with washers are inserted into them. When constructing a homemade vice with your own hands, you should use instructions and ready-made diagrams.

Carpenter's vice design

Helpful information! If you make the pins movable, you can make workpieces of various sizes.

Carpentry workbench

A carpenter's workbench is a durable table with a working surface on which a carpenter's vice (2 pieces) is fixed, clamps for securing the workpiece when planing with a plane, and places are provided for installing a router and other hand-held machines .

Important. The dimensions of the workbench are selected based on practical considerations.

The height should ensure ease of work, taking into account the actual height of the master. The length should be at least 1 m (usually 1.7-2 m), and the width should be 70-80 cm .

Instructions for making a carpentry workbench:

1. The working surface is made in the form of a shield with tightly fitted boards with a thickness of at least 55 mm. Beech, oak, and hornbeam are best suited. They should first be soaked in drying oil. Strengthening is achieved with a beam measuring 4-5 cm, which is attached along the entire perimeter of the shield.
2. Vertical table supports can be made of pine or linden. Typically, a beam measuring 12x12 or 15x15 cm with a length of about 120-135 cm is used. The supporting elements are connected by horizontal jumpers made of a wide board, fixed at a height of 20-30 cm from the floor.
3. Tools and accessories are stored on shelves that are located under the lid. It is better to make them in the form of a cabinet with a door. Shelf panels can be placed on the wall above the workbench.
4. A pair of homemade or factory-made carpentry vices is attached to the working surface.

Reference . The workbench can be mobile (movable), folding (collapsible) or stationary. In the latter case, it is recommended to bury the supports into the ground by 15-20 cm.

Vise

For a homemade vice, you will need a long screw rod with a diameter of at least 20 mm with a threaded part length of at least 14-16 cm, metal pins and wooden blocks.
We recommend: Working with a laser level on a construction site. How can you use a modern device to make work faster and easier?

Manufacturing is carried out in the following order:

1. A wooden block is cut out (possibly from pine) about 20x30 cm in size and at least 5 cm thick, in which a hole for a screw is drilled in the center, and at the bottom there are 2 holes for guide pins. This first vise jaw is permanently fixed to the work surface.
2. The second sponge is cut from a similar board and has dimensions of 20x18 cm. This will be a movable element.
3. A screw pin is passed through the jaws. To prevent displacement of elements, studs with a diameter of about 8-10 mm are fixed. A handle is installed on the screw rod.

Making a metal bench with your own hands: drawings

If you often work with metals, the best solution would be to create a metal workbench with your own hands. Wood material is not suitable for such purposes, since it will often be damaged when processing metal products.

Universal metal option

It is worth noting the following elements of such a device:

• horizontal jumpers are used to ensure longitudinal rigidity;
• Small rack beams are made from profiled pipes. They are used to assemble the frame part of pipes. In the corner zone there are welded spacers, which are made of steel strips;
• for rack beams, profile pipes with a wall thickness of 3-4 mm are used;
• corner No. 50 is necessary for the racks on which the tools are mounted.

To create high-quality seams, it is necessary to use a carbon dioxide semi-automatic machine, as well as a pulse-type welding machine.

Assembly of a universal device begins with the frame. To do this, long and short beams are welded. To prevent them from twisting together, follow these steps:

• place the elements on a flat surface;
• in areas where connecting points are located, it is required that the beams are joined using spot welding;
• in this case, welds are made on one side of the frame and then on the other.

The diagram shows the frame of the metalworking machine, as well as its full view

After this, the rear beam and vertical posts are mounted. It is important to check how evenly they are located in relation to each other. If there are any deviations, they can be bent using a hammer. When the frame is ready, special corners are attached to it to strengthen the structure. The tabletop is made of wooden boards, which are impregnated with a fire-resistant liquid. A steel sheet is placed on top. A plywood shield is attached to the vertical rack parts. The same material is used for lining the cabinet.

Table 1. Making a metal bench with your own hands

Do-it-yourself knife sharpening device: drawings and nuances

To make a sharpener from a washing machine engine with your own hands, you can take parts from old Soviet appliances. To build a sharpening machine you will need the following parts:

• tube for turning flanges;
• grindstone;
• special nuts;
• steel elements for the construction of protective casings;
• cable cord;
• launching device;
• a block of wood or a metal corner.

Homemade unit for sharpening knives

The flange section must match the dimensions of the bushing. A sharpening stone will also be placed on this element. This part will also have a special thread. In this case, the flange is pressed onto the motor shaft. Fastening is carried out by welding or bolting.

The working winding is fixed to the cable. Moreover, it has a resistance of 12 ohms, which can be calculated using a multimeter. A frame is also made, for which a metal corner is taken.

How to sharpen a drill for metal: do-it-yourself device

You can make a simple metal drill sharpening machine from ordinary tools. An abrasive block is suitable for this.

At home you can use the following equipment:

• You can use an electric sharpener to sharpen the drill. In this case, sharpening is performed from the edge. When using a sharpener, you need to pay attention to the sharpening angle and the fixation of the drill on the axis of rotation. Excess metal should be removed gradually. Finally, the edges are shaped into a cone;
• A grinder is used as a do-it-yourself sharpening machine. For sharpening, the cutting tool is secured in a vice. To do this, the mounting angle is selected, and the disk is mounted.

Types of drill sharpening devices

It is worth considering that the grinder is mounted on a flat surface. In this case, the disk should be located downwards. If the grinding device is not secured securely, it can damage the drill. Sharpening with a grinder can only be done for products with a small diameter. It is not possible to finish using a grinding device. The edge of the shield is used to support the cutting tool.

You can also use a drill attachment, which should be equipped with a grinding disc with sandpaper. To grind elements with a drill, you need to find two flat surfaces.

Joiner's machine

Making homemade machines with your own hands begins with sketches of a drawing. The main parts of a homemade carpentry machine are:

1. Working surface. It is necessary to stock up on wood, the thickness of which is at least 6 cm. It is better to choose narrow boards, made of oak, hornbeam or beech. To extend their service life, they are pre-treated with drying oil.
2. Homemade vice. Product sizes may vary. If desired, several types of clamps can be installed. To create a massive vice, choose wood. For small bench vices, steel blanks are used.
3. The basis of a carpentry workbench. Linden or pine are suitable for it. The structure is strengthened by means of longitudinal bars, which significantly increases the stability of the machine.

It is more convenient to work if there are shelves nearby. The best option for their location is directly above the work surface. Shelves are either fixed or retractable.

The optimal linear parameter of a joinery machine is a length not exceeding 1 m. When installing a pair of vices, the length is slightly increased.

According to modifications they are distinguished:

• mobile;
• stationary;
• folding universal machines.

Drilling machine for home workshop

You can make a drilling machine attachment from a drill with your own hands. The drawings will help you understand the design. For such a design you will need the following elements:

• base or frame;
• rotation device;
• mechanism for ensuring supply;
• stand for fastening the door.

Installation of the machine in the workshop

Here are the main steps in making a homemade drilling machine with your own hands:

• Chipboard is used for racks. In this case, you need to choose a thickness of at least 20 mm;
• To maintain the accuracy of the drill machine, it is necessary to use guides. In this case, you can use steel strips;
• For the pads, steel clamps are used.

To make a drilling machine you will need a rotary tool feed mechanism. The design uses springs and a lever. There are various tools for sharpening drills.

Assembling a drilling machine with your own hands: drawings with dimensions

The design will also require the manufacture of a homemade vice for a drilling machine. The simplest device can be assembled from a drill, without a steering rack. To minimize vibration processes, it is necessary to build a more massive table. The stand and table are connected at right angles. In this case, the drill can be attached using clamps. A vice is mounted on the table surface.

Complex drawing of a drilling machine

Do-it-yourself homemade woodworking machines

Homemade wood lathe

The author is the host of the youtube channel “Zhelezjaka”. This is a drill stand modified in a certain way. First, let's put it on its side and turn off the drill chuck. Instead of a chuck, a drill is screwed in, which will act as a headstock. A toothed attachment for fixing wooden workpieces on a DIY lathe. The stand frame performs the function of the tailstock. We screw a sharpened bolt with a locknut into a specially drilled hole. We clamp the wooden piece, moving the carriage and clamp the two screws that fix it in this position. Everything is working. There is not enough support for the incisors. Consists of two halves. Made specially collapsible to be adjusted for different workpieces.

Inventions for DIYers in a Chinese online store.

On the machine, it is inserted into the bracket and adjusted both in direction, reach and height in relation to the workpiece. To carry out turning work you need a special tool. But in his absence, the master used sharpened old files, of which there are many in the garage. This is necessary to simply show the machine in operation. Turning something on a machine is not a very difficult job. It's even very interesting. The main condition here is not to rush anywhere. After turning the workpiece and sanding it with sandpaper, we got two handles for files.

According to the alteration. The master added a corner to set the mood. To equalize the height, I welded the guide rods, common to drilling and lathe machines. I installed the bracket. Tightened the bolt with the cone. I made the headstock.

Browse products for inventors. Link to the store.

Inventions for DIYers in a Chinese online store.

This homemade woodworking machine can be used as a drilling machine. You just need to lift it up. Remove the tenon from the headstock. Place the chuck with the drill. Remove the spike from the bottom.

Wooden blanks can be turned to the entire length of the stand. With a diameter much larger than when making a handle. The power of this drill mixer is enough to process such a workpiece.

DIY milling machine from a drill

No matter what test the master subjected his drill stand to. Drill a 19 mm hole in the metal. After that I worked with a 2 mm drill. Rotated a workpiece 70 cm long. I used a drill as a mixer at a construction site. In this video, a standard cutter from a router with an 8 mm shank is installed on a drill. For securing the guides and the workpiece, the table that the master made in advance turned out to be very convenient. The ability to smoothly lower and raise the drill was not superfluous. I tried using a different cutter. I came to the conclusion that there are not enough high spindle speeds. Although, for rough woodwork, in the absence of a router, you can get by with such a tool mounted on a stand.

DIY electronics in a Chinese store.

Homemade drill stand

Workpieces can be drilled to any height without complicated adjustments. We take a twenty, put a 5 mm thick strip, drilled with a seven, to make it easier to make a large hole. I made it from metal corners, a square pipe, and used a strip in the eyes. Corner on the carriage. Square pipe on a stand. The band used is narrow. Square pipe on brackets. It's all cooked. The machine is dismountable, the rod and carriage, adapters for drills are removed. They can be done additionally. Second part

Woodworking machine jointer-thicknesser with automatic board feed

Homemade woodworking machine

What parts does it consist of? Angle bed 40 x 40. If you can find 35 x 35, that will also work. Required four corners 450 mm long. 9 – 550 mm. Two more corners 270 mm long. Sold at hardware stores. A 12 m pin is used. They are also available in stores. Nuts, washers. At the city flea market you can buy a drum for little money. Knives 200 millimeters long can be found at a hardware store. You need two brackets for the electric motor. Two small tables for a planer. Size 300 x 220. Sawing table 600 mm long. Tables can even be made of wood, textolite, or from any suitable material. It is not necessary to make iron ones.

Tools for woodworking here.

Designing a press for a garage with your own hands

The design of a homemade garage press is intended for straightening, pressing, bending sheet materials and for compression. Devices for plumbing work are characterized by a compact and simple design. The forces from such a press can vary between 5-100 tons. For garage work, 10-20 tons is quite enough. To make a similar design, a manual drive is used. The hydraulic device contains two chambers with pistons.

Homemade design

Do-it-yourself press from a jack drawings

You can see how to make a simple device on a special video of a press made from a jack with your own hands:

A simple option is a hydraulic one, which can be constructed from a bottle jack. An important element is the frame, inside of which the jack is placed. The platform is used as a reliable base. The upper surface is used to support the elements being processed. The table should move freely up and down on the frame. In this case, rigid springs are attached to the base on one side, and to the working surface on the other.

Using a jack

Here is a simple assembly diagram:

• the necessary elements are cut out according to the drawings;
• The base is mounted by welding. In this case, the steel structure should resemble the letter P;
• a mobile table is made from a pipe and channel;
• Finally, the springs are fixed.

Assembling a homemade drilling machine

The procedure for assembling a homemade drilling machine is shown in the video below . It is based on an electric drill, which is mounted on a frame with the possibility of vertical movement. Main elements of the machine:

1. Electric drill.
2. Metal base with clamps for workpieces (clamps).
3. Stand for attaching a drill. It can be made from chipboard 2-2.5 cm thick. A good option is the base from an old photographic enlarger.
4. Feeding mechanism for cutting tools. Guide rails are installed on the stand to ensure strictly vertical movement of the drill. The easiest way to feed a tool is with a lever for manual pressing and a spring . Adjustable stops are installed to control the depth.

We recommend: Wood sander - which one is better to choose? Rating of popular models and manufacturers