How to set up an Ariston fast r gas water heater

How to light an Ariston gas water heater: switching features and safety precautions for use

Modern gas devices presented on the market of household water heating equipment meet all European quality and safety standards, and at the same time have a relatively low cost.

But before lighting the Ariston gas water heater and starting to use it, the owner must carefully and in detail familiarize himself with its principle of operation, operating instructions and safety regulations. This is exactly what we will talk about in detail in our article, providing the material with visual photos and video recommendations.

The design and principle of operation of the Ariston column

There are atmospheric and turbocharged gas appliances. Atmospheric engines are equipped with an open combustion chamber, while turbocharged engines have a closed chamber. We reviewed the rating of the best flow-through geysers here.

Ariston specializes in the production of boilers and water heaters of both the first and second types and is a leader in the market for the production of water heating devices. We recommend that you familiarize yourself with the nuances of connecting an Ariston gas boiler.

Of the entire model range of the brand, the following models are in greatest demand, according to customer reviews:

Ariston Fast Evo is a modern water heater with electric ignition and an open combustion chamber, with a built-in flame control system that allows you to maintain a constant temperature in it.
Ariston Marco Polo Gi7S is the most powerful model with electric ignition and a closed combustion chamber, with electronic control and an overheating protection system.
Ariston CA 11P is a flow-through gas water heater with a piezo ignition system and an open combustion chamber, which is simple and easy to use and belongs to the budget price category.

Despite the diversity of the Ariston model range, all devices have a similar structure, differing only in design and minor differences in design.

In order to understand how to properly use an Ariston gas water heater, let’s look at its structure.

A water heater consists of the following main elements:

water block;
gas-burner;
the combustion chamber;
heat exchanger;
chimney;
fan (if it is a turbocharged model);
sensors for monitoring fuel supply, water temperature, traction, etc.;
control Panel.

In addition to the basic configuration of the Ariston gas water heater, the device includes gas supply channels and pipes through which water flows.

On the front of the boiler body there is a control panel that allows the user to control the operation of the device and set the necessary parameters; there are gas and liquid flow regulators. An LCD monitor can also be located here to display the water temperature.

To briefly describe the principle of operation of a gas water heater, it is as follows: gas, burning inside the device, heats tap water, which passes through a heat exchanger and then drains through the tap. You can read more about the principle of operation of a gas water heater in this material.

Types of ignition: how to use a gas water heater

There are not so many ways to ignite such a device as a gas water heater. They began to be invented along with devices, and were constantly improved. Today, the most modern speakers light up without human intervention, only from the supply of water to the device.

But there are also simpler units on the market, the kind that most of our compatriots used a couple of decades ago. These are so-called semi-automatic devices.

According to the ignition method, hot water columns are divided into the following:

Piezo ignition. In these devices everything is done manually. You press the button, it opens the gas supply, and with the help of an electric lighter the wick will ignite. Keep in mind that the wick continues to burn even if the hot water is not turned on. This is contrary to the principles of economy.
Electric ignition, or automatic. Everything happens here automatically. you just need to turn the handle of the hot water tap, and the column will light up automatically. When you close the tap, the wick will go out and go into standby mode.
Hydropower system. Completely automated system. Its operating principle consists of an installed turbine, which is driven by a water flow. There is no need even for batteries, which are needed for electric ignition. Almost all current models of the Vailant, Bosch and Ariston brands are equipped with such systems.
Manual ignition. It is practically not used in devices produced today, but it is still found in existing models. In this case, the column is adjusted using the gas supply knobs.

What you need to know before connecting an Ariston geyser

Ariston water heating devices are quite economical and have low gas consumption. At the same time, the boiler has a wide range of operational capabilities.

Before you start using the Ariston gas water heater, you must do the following:

make sure that the apartment (house) has good ventilation;
check the water pressure - if the pressure mark is below 0.3 atm, then care should be taken to additionally recharge the circuit;
if there is often a decrease in water pressure in the apartment, you need to make sure that there is no leakage of liquid from the system itself.

It is important to know that identified faults such as low water pressure should only be repaired by a specialist.

Modern Ariston geysers are universal and quite easy to use. To activate them, you just need to press a button. The required temperature on the brand’s gas equipment is set using special control buttons - to supply hot water, it is enough to set 36-56 degrees.

It is also important to know that the water heater starts working immediately after opening the hot water tap. As soon as the user closes the tap, the column stops heating water. If the device needs to be completely turned off, then turn the external switch to the maximum and turn off the gas supply.

Instructions on how to turn on the gas water heater video

Today many people use gas water heaters. They ensure the availability of hot water even when it is turned off. But many consumers have a preconception that geysers pose a great danger. Modern geysers debunk this myth. If you ignite the column correctly, it will work properly and completely safely. Gas water heaters Vaillant, Junkers, Bosch, Ariston have good reviews.

If you took care of the arrangement of your country house in advance and installed a gas water heater, you have the last step left on the path to a warm and cozy life. And this step is setting up and correctly turning on the column. In order for the gas water heater to work, you will have to do a few simple steps. First, make sure that the gas valve that supplies gas to the column is open. Then open the tap responsible for supplying water to the tank of the water heating unit. Switching on or ignition can be done in only three ways, which depend on the design features of the column.

Modern gas boilers are absolutely safe, unlike their early predecessors. Most of the key processes associated with their correct operation are simplified and do not require additional training from the user. But despite this, do not forget that any gas apparatus is a source of potential danger.

Let's look at the example of Bosch gas instantaneous water heaters WR10.B, WR13.B, WR15.B, manufactured in Germany, for the markets of Russia, Ukraine, and Belarus. These models differ in the amount of heated water.

Before starting, check that the gas and water valves are open and that two 1.5 V type R batteries are inserted. These heater models are equipped with electric ignition, as indicated by the B index at the end of the name. Electric ignition occurs using batteries.

To turn on the device, you need to press the power button on the front panel of the device; the speaker is ready for operation and is in standby mode. In order for heated water to flow, you just need to open the tap. At this point the pilot flame ignites and four seconds later the main flame ignites, so the pilot flame goes out after approximately twenty seconds.

These devices do not have a constantly burning wick, which is economical since there is no constant gas consumption. If there is a long break in operation, air may accumulate in the gas system, which will prevent the igniter from working properly and, as a result, the main burner will not be able to ignite.

To fix this problem, you need to open and close the hot water tap several times. Adjustment of water heating occurs by reducing its flow; by turning the valve clockwise, it decreases; counterclockwise, respectively, vice versa, the flow increases and the temperature decreases. At a low water temperature, gas costs are reduced and less scale is formed in the heat exchanger.

In the video, in addition to the startup procedure, you can also learn about setting up the speaker:

Setting up the device when connecting for the first time

When you turn on the Ariston household gas water heater for the first time, it must be configured accordingly. All issues related to the installation of the device are described in detail in the operating instructions .

The manual includes explanations on how to connect the device to the water supply, turn it on and light the flame. Each action has its own scheme, which must be strictly adhered to in order to avoid problems when using a instantaneous gas water heater.

Correct setting is carried out according to the following algorithm:

Adjusting the water flow - at this stage the water flow should be adjusted; it should be made minimal (the optimal value is 6, 10 or 12 liters). If this step is not completed at the very beginning, then the entire installation will be inaccurate.
Adjusting the water temperature - the mixer supplying hot water must be turned/opened to full power. Moreover, it is only allowed to turn on one valve/open one tap in the entire room. Next, the water temperature is adjusted, after which the tap is closed.
Adjusting the gas supply - for this you need to clarify the minimum parameter of the unit (you can find it in the data sheet of the Ariston dispenser). To regulate the gas supply, the toggle switch returns to minimum and the gas supply valve opens.
The next step is to open the hot valve . After this, the water heater immediately starts working - experts recommend waiting for the pressure in the line to drop before starting installation, and then turning the gas regulator to the minimum value until the optimal temperature is reached.
The final stage is adjusting the hot flow . First you need to open the mixer and evaluate the heating temperature of the flow, which should be 25 degrees higher than at the outlet. Since the gas boiler heater heats the water gradually, you need to wait.

How to adjust water in a gas water heater

Not every boiler has a DHW control function. If we talk about automatic water heaters, changing the water flow is done using a rotary knob located on the front side of the casing. In semi-automatic machines, such a function is provided only in modern models.

In old geysers, in order to regulate the temperature of hot water, it was necessary to regulate the intensity of gas combustion. The intensity of the flow was changed by means of two bolts on the back side of the water reducer, which could only be reached by disassembling the boiler body.

Methods for regulating temperature in instantaneous gas water heaters by changing the water speed:

Mechanical control unit - there are two rotating knobs on the body. As a rule, the left one is responsible for the gas supplied to the burner, the right one for the speed of water flow when the hot water tap is opened. Using the latter, the heating temperature and the minimum threshold for the burner operation are set. The lower the flow rate, the more the water heats up.

Columns with electronic control of outlet temperature - settings in this case simply require selecting the appropriate mode. The boilers have a modulating burner that automatically maintains the specified heating intensity. Setting up an automatic instantaneous gas water heater and correcting errors and failures is carried out exclusively by a specialist.

It is prohibited by manufacturers of water heating equipment to regulate the water temperature in a gas water heater with cold water. When mixed with cold water from the tap, the normal operation of the boiler is disrupted, conditions are created for excessive load on the heat exchanger (the rate of scale formation increases) and the water reducer.

Ignition of the water heating device

Depending on the model of the geyser, you can light it in three ways:

manually - using a piezoelectric element or matches (relevant for older speaker models);
electric ignition (from batteries or from a 220 V network);
from a hydraulic turbine.

Manual ignition of the column is possible using matchesif we are talking about an old-style model.

Before turning on such an Ariston gas water heater, you need to perform the following steps:

Open the water supply tap connected to the device.
Turn the main valve to allow fuel to flow to the igniter.
Light the wick with matches.
Turn on the gas regulator.

This ignition method is not absolutely safe. Therefore, it is necessary to follow all safety rules and keep children away from the device.

The manual version using piezo ignition is more convenient. Simply press a button to light the wick in the combustion chamber. Water heaters with piezo ignition do not need to be turned off completely - when the water is turned off, only the wick will burn. Disadvantage of this method: increased gas consumption.

Devices with automatic ignition are the safest and most convenient to use. The latest models of water heating equipment are equipped with this option.

Detailed instructions for turning on an Ariston brand column with automatic ignition:

Make sure the cold water inlet valve to the water heater is open.
Make sure the gas valve is also open.
Check that the batteries are installed correctly (1.5 V LR20).
Turn the adjustment knob between the minimum and maximum positions.

To turn off the gas water heater, simply close the hot water tap. If you want to completely turn off the gas water heater, you first need to turn the handle (on the control panel) to the OFF position all the way. Then turn off the gas valve on the pipeline.

After complete removal of water, close the water valve on the water supply in front of the gas water heater.

How to install and connect Ariston water heaters

When studying the legal requirements, it becomes clear that water heaters can only be placed in certain rooms. This could be a non-residential room or kitchen. Previously, installation in bathrooms was also allowed, but recent changes in legislation have prohibited this option.

In this case, the walls of the room must certainly consist of non-combustible material, and the ceilings must be higher than two meters. If the wall material is fire-resistant, a layer of thermal insulation should be installed at the installation site of the column.

Important! Installing the water heater on wooden surfaces is strictly prohibited.

Hanging must meet a number of requirements. So the side panels are installed at a distance of 150 mm from the walls. The front side is located at a distance of more than half a meter from surrounding objects.

For correct connection, the chimney pipe must be installed properly. It can only be made from materials that are non-corrosive. A tap should be installed near the column to shut off the gas, which should be painted yellow.

Important! If the installation of a shut-off valve cannot be completed, installation of the water heater is prohibited.

How to install

Before installing the Ariston column, you should decide on the height at which it will be fixed. This is necessary for safety, especially if there are young children in the family. Fastenings must be highly reliable. Using a drill, holes are made in the wall, after which the water heater is screwed in with self-tapping screws.

To connect to gas and water, tees are used, which are cut into pipes. Therefore, welding will definitely be required.

After the work is completed, you should learn how to turn on the Ariston column. Each boiler has its own instructions for use, in which everything is indicated step by step.

Important! However, it is worth keeping in mind that the initial installation and connection must be carried out by a specialist. Each model has its own characteristics, and this can be very important.

Rules for using speakers in apartments

Each Ariston model comes with an instruction manual. The instructions explain in detail the basic rules for using the device, safety standards and much more. If you follow all the manufacturer’s recommendations, the service life of the unit will be longer, and the likelihood of malfunctions and dangerous situations will be less.

Manufacturer's recommendations for use

Basic recommendations for use:

It is not allowed to place foreign objects on the surface of the device.
The device may only be cleaned and repaired when it is disconnected from all power sources (water, gas, electricity).
If foreign odors are detected coming from gas equipment, it must be immediately disconnected from the power supply.
If the combustion products controller fails, the column must not be turned on.

Only if all of the above rules are observed, the use of Ariston gas equipment will be safe.

If the device is used incorrectly and is not properly cared for, this can lead to the most unpredictable consequences, including explosions, fires and fatal poisoning. Therefore, in order to avoid troubles as a result of improper maintenance, it is best to choose a gas company and enter into a maintenance agreement with them.

Conclusions and useful video on the topic

How to properly light a gas water heater - a detailed video review in the following video:

Review of new products in the line of geysers of the Ariston brand:

Ariston geysers are one of the most reliable water heating devices in the world. In addition, they are very easy to operate and economical in fuel consumption. It is enough to understand how the device lights up to ensure comfortable and quick heating of running water for personal needs .

Do you heat water with an Ariston brand column and want to share with other users the secrets of proper and safe operation of a gas water heater? Or do you have questions that we did not cover in this material? Ask them to our experts and other site visitors, leave your comments - the contact form is located below.

Source

How to set up and adjust a gas water heater

Excessively hot water, high gas consumption - all this is a consequence of the fact that the settings and adjustments of the gas water heater were performed incorrectly. Meanwhile, you don’t need to be a specialist to select an operating mode that will provide comfortable operating conditions for a flow-through gas boiler.

The settings of Chinese, Russian or European speakers are not much different from each other, so below are the general principles for making adjustments taking into account the type of boiler (automatic or semi-automatic).

Connections, 4, first start, Z. installation of the front panel

First start, Front panel installation

The device comes fully equipped and is ready for

connection. The supplied set of additional equipment includes:

Natural gas connection

(Fig. 7): Gas pipe 01) (male thread) 3 4 inches.

Gas connection

(Fig. 7): Note: Pressure regulator must be used

gas required to ensure the required pressure and gas flow.

Length of pipeline between gas pressure regulator and

the geyser should be no more than 2 meters. If in

The after-heater runs on liquefied gas. It is necessary

use two cylinders connected in parallel.

Cold water connection

(Fig. 7): Pipe01) 1 4 x 0 75 (male thread) 1 2 inches.

The package includes 4 gaskets.

Important!

MUST spend

cleaning water and gas pipelines from dirt before performing

installation of a gas water heater.

Hot water connection is carried out using

flexible hose (Tv)' (Fig. 7) installed on the water heater.

Chimney connection

(Fig. 3)

This water heater is connected only to a chimney with natural draft. Connection

provided by means of a coupling (diameter is indicated in the size table) inside the ventilation duct. Be sure to provide a condensate drain on the chimney so that condensate that may form in the pipe cannot enter the device.

The first start-up of the water heater must be carried out by a qualified specialist.

— Check whether the cold water and gas supply taps are open. — Check the tightness of the gas circuit. — Turn on the water heater. — Follow the instructions given in Chapter 6 “Controls and Operation”.

(h. Front panel installation

Remove the protective film from the front panel

Attach the front panel to the device (Fig. Insert the two side grooves of the front panel into

frame tabs E Install 2 internal screws O for fastening the front panel Install the screw

WITH

decorative panel fastenings