TOP 20 best stoves for a bath: 2021 rating and which one to choose with a closed heater for a Russian bath

A sauna stove is a modified heating stove; in addition to the main body and firebox, there is a steam generator, which is considered the main feature of such devices.
Below we will look at how to choose a stove for a sauna, what parameters to consider in 2021, and which models in terms of price/quality ratio to look at first.

The rating takes into account not only the technical characteristics, but also the strengths and weaknesses of each product.

Rating of the TOP 20 best stoves for baths in 2021

The best cast iron wood stoves for saunas

In these stoves, cast iron is used not only for the firebox elements, but also for the manufacture of the stove body. Much more massive than steel heaters. They retain heat excellently for a long time, but warm up rooms more slowly and produce soft steam.

1

Wood-burning sauna stove Hephaestus ZK 18 (M)

Rating:5.0

• floor sauna stove
• heated volume 18 m³
• body material: cast iron
• chimney
• 8×39.3×47.8 cm

Average price: 50,000 rub.

Made from SCh 20 cast iron with the addition of chromium. In the Hephaestus line, the ZK modification has more powerful steam generation and creates the ideal regime for a Russian bath. The reinforced closed heater with a capacity of 18 m3 is equipped with a recess inside the firebox (an additional deposit for steam is placed here), and the lower part in contact with the flame is also equipped with heat-removing spikes (directed inward). As a result, the heating area increases significantly, and heat transfer accelerates.

Peculiarities:

• the presence of two combustion chambers, with the heater being the second arch of the firebox;
• flame separator of the lower firebox to direct the flow of fire to the rear wall with subsequent supply to the chimney;
• an air vent under the chamber for additional oxygen, bypassing the combustion chamber;
• two types of doors - with glass and solid cast iron.

Hephaestus ZK stoves operate exclusively with cladding (included in the package). Optima or President options are available.

2

Wood-burning sauna stove Ermak 16 Mesh-Premium (Cast Iron)

Rating:4.9

• floor sauna stove
• heated volume 16 m³
• body material: combined
• power 16 kW
• chimney

Average price: RUB 33,945

Long-lasting modular cast-iron-steel oven. The reliable firebox is made of cast iron containing graphite, and the heater and complex chimneys are made of structural carbon steel. A capacious open mesh heater (aka body) forms a dry steam room mode. Lovers of Russian baths can equip the stove with a closed heater and get soft, moist steam.

The manufacturer offers up to 7 modules per oven. The heating system can be retrofitted with a steam generator, remote tank, convector, heat exchanger.

3

Wood-burning sauna stove Ermak 16 Premium (Cast iron)

Rating:4.8

• floor sauna stove
• heated volume 18 m³
• body material: combined
• power 16 kW
• chimney

Average price: RUB 29,189

Another modular cast-iron-steel stove in the Ermak 16 line. Many parameters of Premium and Premium Grids are similar: the same variability of options, multi-mode operation, volumetric firebox with fire division into 4 streams.

The main difference between the model is the volume of the heater. Here it is “only” 40 kg (for the mesh 150-200 kg), however, the options allow you to purchase a mesh heater and increase the capacity of the heat accumulator. Another feature of this model is faster heating of the premises, which is facilitated by an external convector casing along the stove body.

Video: How to choose a good stove for a wood-burning sauna

How to choose a stove for a sauna?

When choosing a sauna stove, experts recommend first studying the main parameters:

1. What kind of steam room do you want ? For Russian, the temperature ranges from +45...+60 degrees, with humidity from 60 to 95 percent, so a closed heater is recommended in this case. For Finnish, the indicators are different: +70...+110 degrees and humidity 10-15 percent, and here an open heater and a convector casing are used.
2. Type of food . There are wood, gas and electric. The first ones are simple in design, fill the steam room with a pleasant woody smell, but require decent reserves of fuel. The latter run on gas, are easy to use, do not require regular cleaning, and it is possible to adjust the temperature. Electric ones are used in Finnish saunas; they are compact, quickly heat up the steam room, but have a good appetite.
3. Is it possible to heat from an adjacent room ? To do this, you need an external combustion tunnel, which is relevant for large rooms.
4. Is there a built-in heat exchanger ? It is necessary to heat the water in the tank so that the owner of the stove does not run to another room with a ladle.

The best electric sauna stoves

Electric ovens have become widespread due to their convenient and economical use. The rating includes 5 popular models that have optimal characteristics.

Sawo SCANDIA SCA-60NB-Z

High-quality stove, suitable for baths and home saunas . It is distinguished by high quality and reasonable price. Suitable for steam rooms up to 8 cubic meters.

Holds up to 22 stones, which creates soft steam when adding water to the oven.

The oven is equipped with a built-in control panel for convenient use.

Characteristics:

• dimensions - 51.50x45x29 cm;
• heated volume - 8 m³;
• power - 6 kW;
• type - floor;
• chimney diameter - 11.5 cm.

Advantages:

• quality material;
• excellent assembly;
• attractive appearance;
• galvanizing inside the furnace;
• compact size;
• convenient remote control;
• low price.

Flaws:

• suitable for a small steam room;
• low power.

Harvia Cilindro PC70E

The device is intended for medium-sized couples . The body is made of steel and covered with durable paint. You can adjust the steam level - just splash water on the side wall.

Controlled by remote control.

Characteristics:

• dimensions - 32x93x32 cm;
• weight - 10 kg;
• heated volume - 10 m³;
• power - 6.8 kW;
• type - floor;
• chimney diameter - 11.5 cm;
• number of stones - 30 kg.

Advantages:

• works from the network;
• convenient remote control included;
• the body is made of steel;
• compact size;
• does not fade over time.

Flaws:

• low location of the temperature regulator;
• high price.

Sawo ARIES AR-60NB-WL-P

Stylish, high quality unit with high performance . The heater’s power is enough to heat a steam room with an area of ​​up to 8 cubic meters. You can feed from the top and sides. At the same time, the steam is quickly and evenly distributed in the room.

Characteristics:

• dimensions - 43x92.50x25 cm;
• weight - 13 kg;
• heated volume - 10 m³;
• power - 6 kW;
• type - floor;
• chimney diameter - 11.5 cm;
• number of stones - 65 kg.

Advantages:

• economical energy consumption;
• convenient control panel;
• steel body;
• powerful thermostat;
• attractive price.

Flaws:

• a large number of stones;
• simple design.

Sawo MINI MN-36NB-Z

Designed for a medium-sized steam room . Maintains a comfortable room temperature of up to 6 cubic meters for a long time.

Despite its small dimensions, it heats up quickly and lasts for many years.

Made of stainless steel, resistant to temperature changes . Tolerates aggressive environments with high humidity.

Characteristics:

• dimensions - 43.50x45x21 cm;
• weight - 13 kg;
• heated volume - 6 m³;
• power - 3.6 kW;
• type - floor;
• chimney diameter - 11.5 cm;
• number of stones - 9 kg.

Advantages:

• compact size;
• economical consumption of electricity;
• stylish design;
• fast heating;
• high quality case.

Flaws:

• holds only 9 kg of stones;
• control on the body.

Sawo SCANDIA SCA-80NB-Z

Compact model designed for a steam room up to 13 cubic meters. meters _ The frame and outer part are made of stainless steel. The inside of the oven is galvanized.

This ensures excellent operation of the stove at high temperatures and humidity.

Holds up to 22 kg of stones . There is a control panel with temperature control and timer.

Characteristics:

• dimensions - 51.50x52x29 cm;
• heated volume - 13 m³;
• power - 8 kW;
• type - floor;
• chimney diameter - 11.5 cm;
• number of stones - 25 kg.

Advantages:

• work from the network;
• reliable body;
• fast heating;
• uniform steam distribution;
• easy to use;
• built-in control;
• Possibility of delayed start.

Flaws:

• high price;
• heavy load on the network.

TOP 2 best stoves for saunas with a tank

Harvia 20SL

Convenient wood stove with a laconic design .
Closed heater, for forty kg of stones. Heated from the adjacent room, the stove power is estimated at 24 kW. It generates steam well and evenly heats the air in a Russian steam room with a volume of up to 20 cubic meters. meters _ The case is made of steel, with durable walls that are not afraid of corrosion.

The hermetic firebox is also made of steel, which is closed by a door made of heat-resistant glass. It is not afraid of soot and always remains clean, allowing you to monitor the flame level.

The stove is small in size, does not take up much space in the room, and can be placed either in a corner or against a wall . The legs are adjustable in height, the door can be moved so that it opens in the other direction. The minimum room volume recommended by the manufacturer is 8 cubic meters. meters.

Main characteristics:

1. Power type: wood fuel.
2. Heated volume - 20 m3.
3. Furnace power - 24.1 kW.
4. Body/firebox material: steel/steel.
5. Weight - 70 kg.

pros

high build quality;

paint fastness;

long service life.

Minuses

not detected.

Vesuvius Rusich Aqua 22 (DT-4) with 61l tank

Wood-burning stove of floor type, with a firebox from an adjacent room .
The grate and door are made of cast iron, the remaining elements are made of structural steel. The casing with ventilation, closed type, can accommodate about 30 kg of stones . Such a stove will serve faithfully for up to ten years, since the materials used do not suffer from external influences and high temperatures.

Additionally, the stove is equipped with a water tank, its volume is 61 liters and it can be installed on both the right and left sides.

Requires installation of a chimney with a standard diameter of 11.5 cm . Additionally, there is an ash box at the bottom, which can be used to regulate the flame and quickly clean the stove.

Main characteristics:

1. Power type: wood fuel.
2. Heated volume - 24 m3.
3. Body/firebox material: steel/steel.

pros

tightness, smooth burning and uniform heat distribution;

drawer for ash;

heated from the adjacent room.

Minuses

Takes up a lot of space along with the tank.

Rating of the best steel stoves for baths

Relatively lightweight heating units for baths and saunas, since the body is made of steel. They combine technology and long-standing bath traditions.

1

Wood-burning sauna stove Grill'D Violet Short

Rating:5.0

• floor sauna stove
• heated volume 20 m³
• case material: steel
• chimney
• 5 cm

Average price: RUB 54,290

The manufacturer has combined style with unique technology. The body is made in the shape of a rounded polyhedron with through patterns (beautiful and effective for heat distribution). The stove is equipped with an open and closed heater to create different steam room modes. Energy is accumulated by jadeite stone, which protects against strong infrared radiation. The carrier is located in the closed heater and around the perimeter of the oven. Efficiency increases the air “pie” between the heater and the body.

Peculiarities:

• the firebox is covered with a two-millimeter stainless steel lining (increasing service life and combustion of pyrolysis gases);
• heating of the coolant occurs up to 400◦C with low heating of the lining;
• wood consumption does not exceed 4 kg per hour;
• small logs up to 30-32 mm are used;
• structural elements are painted with premium silicone and acid-heat-resistant paints.

In the middle price segment, Grill'D Violet Short is made of 09G2S steel with a service life of 2000 hours. Expensive furnaces use AISI 439 steel, which guarantees 5000 hours of operation.

2

Wood-burning sauna stove TMF Tunguska XXL 2013 Inox Vitra anthracite

Rating:4.9

• heated volume 24 m³
• case material: steel
• chimney
• 81x50x101 cm
• wood fuel

Average price: RUB 28,274

An ideal option for a dry Finnish wood-fired sauna, baths with a volume of 12-26 m3. The key to reliable operation and long service life is the design method of thermal uniform strength. Heat-loaded parts are made of high-alloy heat-resistant steel Inox 3 mm thick, the bottom of the heater and the walls of the firebox are reinforced with stringers, other parts are made of “black” steel.

Convection flow is enhanced by ventilation holes on the front panel and a mesh around the perimeter of the oven. This allows you to heat the room in record time. The location of the heat exchanger in the firebox also speeds up the process - flame energy is used for heating.

3

Wood-burning sauna stove Teplodar Sibirsky Utes Panorama 20 LP PROFI

Rating:4.8

• floor sauna stove
• heated volume 20 m³
• chimney
• 5×56.5×86 cm
• wood fuel

Average price: RUB 41,880

Because of the mesh frame, the sauna stove looks “frivolous”, but in reality it is a serious technical solution. The metal mesh increases the volume of the stones, which allows you to maintain temperature parameters until the completion of paired procedures.

Technological features:

• a multi-section steam generator produces finely dispersed steam even before the stones are completely heated;
• the chimney outlet is located at the front wall of the stove, freeing up access to the heater;
• powerful firebox runs on wood or fuel briquettes;
• stones and chimney are purchased additionally.

The main problem of mesh stoves (long heating of the room) was solved by installing a perforated convector. The invention accelerates heat exchange and additionally heats the stones with infrared radiation from the walls of the firebox.

4

Wood-burning sauna stove Berezka Corvette

Rating:4.7

• floor sauna stove
• heated volume 24 m³
• case material: steel
• chimney
• 5x41x73 cm

Average price: RUB 11,900

Corvette stove models are affordable and durable. To reduce the cost, the thickness of the walls of heat-loaded parts (within 4 - 6 mm) and removed the protective side elements. But the stove “will not burn out”: heat-rolled steel 09G2S (GOST 19281-2014) is used for the firebox, the door is made of durable cast iron. The Corvette's power is rated at a modest 8-16 m3.

Unlike expensive heaters, Corvettes are transformable stoves. The sides of the casing are removable. In their place, they put iron water heating tanks (30 or 40 liters) or install loop heat exchangers and get stoves with a tank for a Russian bath.

5

Wood-burning sauna stove TMF Sayany Cast

Rating:4.6

• heated volume 18 m³
• 74x60x80 cm
• wood fuel

Average price: RUB 30,410

Another wire mesh type iron furnace is offered by TMF. Unlike budget-class mesh stoves, a durable cast firebox made of gray cast iron (GOST 1412-85) is used here. The material contains graphite, which absorbs negative temperature amplitudes.

Technical features:

• the capacity of the stone coolant is approaching 100 kg;
• the heater is located on top of the cast-iron firebox and in the space of the surrounding grid;
• the stove runs on wood or long-flame coal (including 25 mm fraction);
• The firebox consists of a lower and upper body with a cast iron deflector to prevent emissions of combustion products.

The stove is “demanding” when it comes to wood fuel. Ideally, this is hardwood dried to 20% dry.

6

Wood-burning sauna stove Harvia M2

Rating:4.5

• floor sauna stove
• heated volume 13 m³
• case material: steel
• power 13 kW
• chimney

Average price: RUB 17,829

Good inexpensive stove. The design of the Harvia M2 is simple, but the design is as ergonomic as possible. Mobility and low weight (45 kg) allow you to reinstall the stove, and the built-in chimney (d 12 cm) and closed heater ensure safe procedures. The niche for stones is designed for 30 kg of boulders (enough for large steam rooms).

Peculiarities:

• the body is made of heat-resistant steel, but the walls are thin;
• fast heating;
• the body does not heat up - effective heat exchange releases energy into the space;
• fuel is saved due to uniform combustion;
• There is a pull-out ash drawer.

The quality of the stove's painting leaves much to be desired. The Harvia M2 firebox is designed for small logs up to 35 cm long.

7

Wood-burning sauna stove Ermak 16-PS (2012)

Rating:4.4

• floor sauna stove
• heated volume 18 m³
• case material: steel
• power 16 kW
• chimney

Average price: RUB 19,603

Thanks to the implemented principle of thermal strength, it successfully creates the microclimate of a Russian bath and the dry-air regime of a sauna. For temperature-loaded parts, 6 mm chromium steel is used, and the body and chimney are made of 3-4 mm steel. The built-in heat exchanger allows you to install a hanging tank, creating both a water stove and a steam generator.

The manufacturer offers 12 additional options, but the standard design also impresses with its ergonomics:

• enlarged combustion chamber;
• heat-resistant glass door screen (it’s nice to watch the combustion and control the process at the same time);
• self-cooling spiral door handle;
• special outlets for cleaning the ash pan;
• circulation deflectors for uniform heat transfer.

In practice, the power of Ermak 16-PS is small. Contrary to the passport 16 cubic meters, Ermak can hardly cope with 13-14 m3 with excellent thermal insulation of the steam room. The coolant capacity can be increased with a mounted heater (installed on the rear panel), but then the cost increases significantly.

8

Wood-burning sauna stove Konvetika 26 from Termofor

Rating:4.3

• floor sauna stove
• heated volume 26 m³
• chimney
• water circuit
• 9×97.2×41.7 cm

Average price: RUB 15,300

One of the best heater stoves for large baths with a steam room of 20-26 m3. The reliable firebox is made of heat-resistant steel with a high chromium content. The deep heater ensures good steam generation. Uniform heat transfer is ensured by an external convector casing with an air gap. It forms a circular convection flow, so the steam room warms up very quickly.

Peculiarities:

• extended grate bars made of cast iron – do not burn out and maintain uniform combustion);
• retractable long ash pan - helps regulate the burning temperature of firewood;
• the body is painted with heat-resistant silicone enamel;
• cleaning holes to remove soot in the firebox;
• stamped parts of the convector and frame.

The manufacturer does not install panoramic glass on the firebox door, so you won’t be able to contemplate the burning wood.

TOP 2 best stoves for a bath with a water heating circuit

TMF Sayany XXL 2015 Inox Vitra ZK TO

The oven is made of chrome-plated heat-resistant steel, the wall thickness is 3 mm .
The steel contains chromium, due to which a film is formed on its surface, protecting the furnace from the effects of gases formed at high temperatures, as well as from corrosion. The stones in the casing prevent overheating, as they take on all the excess heat, dissipating it . The channels here are horizontal; soot does not accumulate in them.

The door is steel, but if desired, the user can replace it with glass. The door has the property of self-cooling. The fuel channel is of an elongated type; it allows the stove to be placed in two rooms at the same time, while the combustion will be carried out from the adjacent room.

The air warms up from room temperature to one hundred degrees in a couple of hours . There is a drawer for ash at the bottom, so you can clean the stove directly while it is burning.

Main characteristics:

1. Power type: firewood.
2. Heated volume - 24 m3.
3. Body/firebox material: steel/steel.
4. Weight - 69 kg.

pros

Firewood, peat briquettes, wood chip briquettes, pellets are used as fuel;

heated from an adjacent room;

there is a box for ash;

high quality steel.

Minuses

not detected.

Ermak 16 with heat exchanger

The main feature of this domestic model is increased functionality .
The mesh heater can be replaced with a hanging tank, and the process takes no more than five minutes. Due to this, optimal bathing comfort is created, the stove grows and changes as the owner’s needs grow.

The stove is a wood stove with a power of 16 kW and is used in bathhouses with a volume of up to 18 cubic meters. meters _ The device is simple, reliable, with a long service life. The door is equipped with a self-cooling handle; if necessary, it can be moved to the other side.

The chimney is located in the center, there is a hole for quick and convenient cleaning of the flues . The firebox is deep, a large load of fuel is allowed at once, the tightness of the firebox will ensure even combustion.

Main characteristics:

1. Power type: firewood.
2. Heated volume - 18 m3.
3. Furnace power - 16 kW.
4. Body/firebox material: steel/steel.
5. Weight - 56 kg.

pros

reliable design, high-quality materials;

convenient cleaning system;

extended functionality.

Minuses

nondescript appearance.

Classification of sauna stoves

When choosing a specific stove for a specific room, you need to know exactly how it will be used, and what technical and design features are typical for the room. But the most important quality is the steam that the selected heater can provide in specific conditions.

According to the classification of furnaces there are:

Closed or open stove

Heater stoves can be open or closed depending on the way the stones are arranged. An open heater is suitable for those cases when several people are steaming in the steam room at the same time. The stones are stacked on the firebox, which is not protected by fireproof masonry. This contributes to fairly rapid heating of the room, and the stones heat up to 200° C. But such a heater cools much faster under the influence of water. Most often it is used in electric furnaces.

A closed heater is preferred for arranging a Russian traditional bathhouse. A larger number of stones are used for it, and the design of the furnace provides for their location. At the level of the top row of stones, a special door is installed through which the steam escapes to the outside. The door remains closed when the fuel is completely burned. The door should be opened several hours before visiting the bathhouse to warm up the room. The air in the room warms up to 60° C and remains warm for 2 days.

Cold and hot ovens

All ovens are divided into cold and hot . This classification is not at all affected by the type of fuel. This refers to the temperature of the outer walls through which heat enters the steam room. In a hot oven, the wall temperature reaches 100° C. They are suitable for any steam room, but are more often installed in rooms where there are no other heat sources.

The disadvantage of hot stoves is the difficulty in regulating humidity and temperature.

A cold oven provides this opportunity. Its walls are heated to a temperature of 40-50° C, while the steam room is heated by special channels that allow cold air to enter the oven from the steam room, and then enter the steam room again already warmed up. By closing or opening such channels, you can regulate the temperature.

Various stoves in the bathhouse

Constant or direct heating ovens

Sauna stoves are divided into continuous (constant heating) and periodic (direct heating) depending on their internal structure.

Periodic ones are designed so that hot stones can retain heat throughout the day. Such a heater is heated all night, and the bathhouse will be provided with heat for the next 24 hours. But you can’t take a steam bath during the heating process.

Fewer stones are required for constant heating furnaces, and they are heated to lower temperatures. Regular heating provides warmth in the bathhouse. They use firewood as fuel, which can create a pleasant aroma in the steam room for connoisseurs of a real Russian bath. Disadvantages include the creation of soot, which does not occur in batch kilns because the smoke does not pass through the stones.

There are also combined stoves, which are most often made of brick and run on liquid fuel. It is necessary to heat such a stove before starting bath procedures, but you can continue the process during washing. An example of combined heaters are stoves that are not equipped with a tank for heating water.

Stones for the heater

The main requirement for stones for heaters is excellent accumulation and subsequent heat transfer. It is preferable to choose volcanic rocks that do not crack when exposed to water and can withstand high temperatures. The stones should be different in size, with the largest ones placed below and the smallest ones on top. It is better to use round stones with a smooth surface for the heater. This will ensure maximum air circulation between them.

Granite, basalt or andesite would be ideal for a heater . But if it is not possible to use such stones, then you can simply collect them along the banks of lakes or rivers. Good stones are dark in color, dense and hard.

You can also replace stones with ceramic or porcelain products that can withstand high temperatures. But it is more advisable to use them as a top layer for a stone pillow.

Having considered all the types of sauna stoves, it becomes clear that there is no ideal option . Each of these types represents different options with certain features in the maintained temperature mode, design, and performance of certain functions. To correctly choose which is the best stove for a bath, you should compare your own capabilities with your needs. As many people as there are, there are just as many different points of view, and the choice of a stove for a bath depends only on each individual person.

TOP 2 best inexpensive sauna stoves

TMF Osa Inox YES anthracite NV

The smallest wood stove in the brand's lineup .
The manufacturer provides a three-year official guarantee on the integrity of the metal and welds of the firebox. Installed in steam rooms up to nine cubic meters. meters. The heater is a closed type, you can load up to 25 kg of stones into it.

There are two ventilated compartments, which additionally warm the steam room by passing air through a uniformly heated mass of stones.

The reduced dimensions do not affect the quality of work, but significantly save the total amount of fuel used. The maximum permissible volume of the steam room warms up in less than an hour.

There is a modification with a short fuel channel, which is well suited for a Russian bath, where the steam room and washing room are combined.

Main characteristics:

1. Power type: firewood.
2. Heated volume - 9 m3.
3. Body/firebox material: steel/steel.
4. Weight - 40 kg.

pros

compactness, ease of installation;

there is an option with a short fuel channel;

affordable price and long service life.

Minuses

not detected.

Karina Optima 3

In conclusion of the rating, it is worth mentioning this compact and inexpensive option for an electric sauna stove .
It has low power, so the stove cannot be installed in rooms whose volume exceeds four cubic meters. Small dimensions and a weight of eight kg simplify installation and allow the device to be moved or transported if necessary.

The heater here is closed, but with a large number of ventilation holes so that the heat is distributed quickly and evenly.

You can load up to 20 kg of stones into it. The case is made of steel and withstands high temperatures well. The stove is equipped with a special bracket for mounting on the wall.

Main characteristics:

1. Power type: mains.
2. Heated volume - 4 m3.
3. Furnace power - 3 kW.
4. Case material: steel.
5. Weight - 8 kg.

pros

small, light;

fast heat transfer;

not afraid of power surges.

Minuses

Sometimes the power may not be enough to produce thick steam.

What types of sauna stoves are there?

To begin with, the stove must be compact, convenient and fire resistant . At the same time, the best stoves for a Russian bath must have optimal power to heat the required amount of water, heat the entire bath room, dry the steam room at the end of the procedure and provide hot steam to everyone washing. In order to achieve this exact effect, it is necessary to properly equip the room and choose the best heater for the Russian bath. Which sauna stove is better? This depends on the dimensions of the immediate room and the level of required temperature. Based on this, the model should be selected.

Wood burning stove

Wood-burning fireboxes create a unique, indescribable atmosphere of a real Russian bathhouse . A special cosiness is created due to the crackling of firewood. They are quite practical; the required temperature is created in a short time. You can begin the procedures approximately half an hour after the start of warming up.

In order for a wood-burning heater to store heat for a long time and warm up the steam compartment well, you need to pay attention to several important points :

• the volume of the steam room must fully correspond to the heat output of the heater;
• According to the type of construction, they are open and closed. An open one can warm up the steam room faster, while a closed one maintains the temperature for a longer time;
• fireboxes in heaters can be built-in or remote;
• there are models with doors made of heat-resistant glass and those equipped with a tank for heating water;
• The material from which the heater is made is of great importance;
• attention should be paid to how much stones fit in the firebox. The more stones, the better the oven;
• An excellent model is such a stove for a bath, when its design has a grate.

The best fuel for a wood-burning heater is birch logs or other deciduous wood. It is not advisable to burn with coniferous wood, since it has a high resin capacity, and this contributes to the formation of soot. To minimize this negative aspect, you should first use aspen firewood, and then coniferous ones.

Another disadvantage is that you need to be distracted from taking bath procedures to maintain combustion and make sure that the firewood does not completely burn out.

Electric oven

Those who prefer an electric stove . Among the main features of electric heaters, high power, small size and heating speed should be noted. They are installed indoors without a chimney and there is no danger of carbon monoxide poisoning. They are completely safe and compact.

The electric furnace is quite easy to operate, the automatic control and regulation system ensures reliability, and the steel body eliminates accidental burns . The thermostat and fuse protect the electric heater from overheating. You can turn it off almost any time.

The only significant drawback of an electric furnace is that it consumes a lot of electricity, which is quite expensive today.

Gas oven

These stoves are very easy to use; they quickly heat the water and maintain the set temperature in the steam room. But next to this, the gas stove has quite large dimensions and takes up a lot of space in the room. But the main disadvantage is the consumption of large amounts of gas. If the premises are not connected to the gas network, then purchasing cylinders will be too expensive.

Which company should you choose?

When buying a stove, first study the range of the most reliable and popular manufacturers:

• Hephaestus - the best cast iron stoves with high energy efficiency;
• Vesuvius is a worthy competitor to Hephaestus with a wide range;
• TMF - different standard sizes, extended functionality;
• Ermak - modular design of products, additional equipment can be used;
• Harvia is a proven brand with high quality materials;
• Sawo are stylish, functional, reliable stoves with a good warranty.