Stylish wardrobe models for the bedroom: the best ideas for 2021

Types of bedroom wardrobes

When starting to purchase a suitable model, you need to decide on the place where the cabinet will be installed, its size, and the type of door opening. Depending on the purpose of the wardrobe and the method of placement in the room, there are several varieties.

Built-in

The frame of the structure is attached to the wall, floor and ceiling, which replace the sides, bottom and top of the cabinet. This model is successfully mounted in a niche or corner of the room. This solution helps to save space in the bedroom and hide possible finishing defects. The full-wall length wardrobe is distinguished by its capacity.

The only negative is the inability to move, lift or rearrange the cabinet. This type of furniture is installed “to last forever,” so you need to think a hundred times before deciding on the location of the built-in wardrobe in the bedroom.

Modular

The most economical and familiar type for Russians. Consists of one housing or a set of modules. Such a wardrobe is often complemented with such items as:

• narrow sections - pencil cases;
• TV stands;
• shelves;
• chests of drawers for linen;
• dressing table;
• mezzanine.

The modules are manufactured in the same design as the cabinet. The result is a functional furniture composition in a single style. It looks more cumbersome than built-in structures, but costs less.

This option is optimal for a bedroom-living room, when it is necessary to place not only clothes inside, but also a book section, equipment, dishes, and decorative elements.

Bedroom set

These cabinets are installed on the sides of the bed and are often sold as a single bedroom furniture set. Bed linen, home knitwear, bath towels and other textiles are stored in the wardrobe. The bedside tables contain items that are required during rest - books, a lamp, glasses and other small things.

Two wardrobes installed on both sides of the sleeping bed can be connected by a narrow mezzanine. It is important to ensure that the fastening is secure so that the structure does not fall onto the bed.

Dressing rooms

Designed exclusively for storing clothes and shoes, they take up a lot of space in the room, the height is from floor to ceiling. Some dressing rooms are comparable in size to a pantry. Inside the closet there are all kinds of devices for neatly placing things - hangers, shelves, organizers, drawers, holders for ties and belts.

The filling is thought out for small things, which makes the wardrobe extremely spacious and makes it easier to find the right thing.

Sliding wardrobe in the bedroom: why is it convenient?

There is a tendency that a modern bedroom should have a lot of free space, but things should not be in plain sight. What to do if there are a lot of them and you need to place them compactly? There is a solution - installing a wardrobe in the bedroom.

This is the most popular type of storage system in the recreation room. It can be placed in the entire wall and up to the ceiling, and when opening it does not require much space - the doors move apart within the sliding structure and do not take up free space in the bedroom.

There are 2 types of wardrobes - built-in and cabinet. The latter is a structure with full side, top, front and bottom walls. Any shape and size is available, the façade can be decorated in any way you like.

A built-in wardrobe in a bedroom is a storage system located in a wall niche. At the same time, there are no side, top and bottom walls. Internal sections are installed and sliding doors are assembled.

Success in choosing the ideal wardrobe for the bedroom depends on taking into account a set of aspects: the characteristics of the room, comparison of different materials, types and shapes, matching the style of the room. The feeling of comfort, coziness and harmony will be direct evidence that the purchase was successful.

Cabinet shapes

Modern furniture manufacturers offer consumers a variety of wardrobe models that differ in size, height, and location.

Popular cabinet shapes:

• Rectangular (linear). The classic version is usually located along the wall. Can be supplemented with an attached open bookcase, dressing table and other modules.

• Radius cabinet. Suitable for a spacious bedroom, it has a round shape and is often complemented by sliding doors. The design matches the relaxing ambiance of the room.

• Angular. Made in the shape of the letter P (for bedrooms with a large area) or L (suitable for placement in a small room), as well as in the shape of a trapezoid for non-standard layouts. The cabinet can be built-in or free-standing, and consist of several cabinet modules.

Design

The appearance of the wardrobe is determined by the design of the doors and fittings. For small bedrooms, light shades are relevant, visually expanding the space.

Expert opinion

Olga Kovalenko

Since 2010 I have been engaged in interior design and architectural design.

If there are colorful textiles and wallpaper, the closet should be laconic, in a minimalist style, so as not to visually overload the space. If this piece of furniture serves as an accent in an overall ascetic environment, then it can be decorated with sandblasting or color printing.

If the room is dark or small, you should choose doors with mirrors. In a room located on the sunny side, on the contrary, it is recommended to use matte surfaces and install the cabinet near the window.

Color

When choosing a cabinet, you should pay attention to the color of the body and facades. If the furniture is built-in, only the doors provide color, and the internal parts hidden from view can be of any color.

For the bedroom, wardrobe wardrobes with facades in calm pastel colors and wood shades on the sides are preferred.

In order to lighten the space and add “airiness” to the bedroom, it is worth installing a white wardrobe with a glossy surface on the doors. If the furnishings in the room are made in a modern style, bright rich shades are possible: blue, pink, purple and others.

Choosing a wardrobe design for the bedroom

First you need to understand what types of cabinets exist, as well as which one is suitable in a particular case.

Firstly, they can be fully built-in, partially, or free-standing. The advantage of the latter type is that it is easy to rearrange the bedroom if desired/necessary. But built-in wardrobe options are permanent interior parts.

With respect to existing forms, cabinets can be linear or angular. The second option is more suitable for bedrooms. This is especially true for small rooms, or you need to hide the pipes of ventilation and other systems.

In addition to those already listed, cabinets also differ in the way the doors open. In the last century, we and our ancestors knew only variations of standard hinged cabinets. But, already from the beginning of the year 2000, sliding wardrobes in which the doors move apart began to gain incredible popularity. Such furniture is quite practical and is perfect for most modern people and modern living conditions. So, to open swing doors you definitely need free space in the room. As for sliding wardrobes, this issue is not even discussed here, which is why they are more practical and convenient. In addition, they are quite roomy, functional, and the beauty of modern cabinets is simply mesmerizing. Today it is very difficult to imagine a bedroom without such furniture.

In addition, not only the shape and the method of opening are different in cabinets. After all, the options you choose may or may not suit your interior style.

It is important to remember that when choosing a cabinet, you should give preference to natural materials for its manufacture.

Stylistics

Depending on the size, general appearance, design of the facades, the cabinet may correspond to one or another style in the interior.

Several variants:

• Classic. The wardrobe is made of valuable wood, looks massive and bulky, and is expensive. It has strong legs and cornices on top. The doors are hinged, decorated with patina, carvings, and forged handles with a rich pattern.

• Minimalism. Such cabinets are also suitable for a bedroom in a high-tech or loft style. They have strict forms and discreet design. Facades are made of plastic, glass, aluminum, chipboard.

• French Provence. The cabinet can be decorated with a thematic pattern. The color is light - from white to blue and gray. The doors can be made of glass or replaced with a rustic curtain. The surfaces are artificially aged, the fittings seem to be worn out.

• Ethnic. The designs are original. Made from rough wood, rattan or artificial materials that imitate natural ones.

Material

A prestigious and expensive cabinet is usually made of wood. However, in addition to the high price, it has other disadvantages - over time, the structure may become deformed, and problems may arise with opening and closing doors.

Wooden furniture is not suitable for rooms with high humidity. A popular and economical material for making a cabinet frame is laminated chipboard.

When choosing a wardrobe, you should pay attention to the formaldehyde content in the particle board. It can be: E0, E1, E2. The lower the number, the less the amount of toxic substance in the glue, the safer the material. E2 class chipboard is not allowed for production in the Russian Federation, according to GOST.

The edge deserves no less attention. It happens:

• PVC (PVC) - used most often, it is practical;
• melamine

This tape is the color of the chipboard, which is glued to the cut site. The ends of the slab must be securely hidden. The edge thickness can be 0.4-2 mm. The higher this indicator, the more reliably the edges are protected. For actively used surfaces, it is worth choosing a thicker edge (1-2 mm), and for inconspicuous or hidden from the eyes 0.4 mm is suitable.

The particle board itself can be coated with:

• laminate;
• acrylic film;
• plastic;
• veneer

It is important that the decorative coating fits securely to the chipboard and does not peel off or bubble.

The thickness of the cabinet sides also matters. It can be 16, 18 and 25 mm. The higher the indicator, the more reliable and durable the structure.

The back walls are invisible, but the material also matters. The cheapest is plywood, which is nailed onto furniture nails. Over time, it may come off, allowing dust to enter the gap. To eliminate the defect, you will need to move the cabinet, which is not always possible.

A more practical solution is a back wall made of fiberboard, which is inserted into grooves and will not fall out in the future. The most reliable option is to cover the back of the cabinet with the same chipboard from which the frame is made.

What material to choose a cabinet from?

Your head can hurt not only from choosing a closet, but also from the closet itself. We are talking about chipboard products. An important indicator of this material is the degree of formaldehyde emission. Simply put, the amount of harmful substances in the stove. Based on their content, chipboards are divided into classes: E0, E1, E2. The lower the number, the less chemistry. In Russia, GOST 16371-93 is in force, according to which the use of E2 class slabs in household furniture is not allowed. Formaldehyde is very volatile and is noticeable at low concentrations. To avoid headaches, at least because of furniture, avoid products with a smell.

When choosing, look at the edge

The edge prevents the spread of formaldehyde. It should cover all ends of the slab. It does not matter what class of chipboard is used. There are two types of edges: PVC and melamine. PVC edge is better. It protects well from moisture and is resistant to mechanical stress. Manufacturers use thicknesses from 0.4 to 2 mm. The edge of the edge is visible and there is no decoration on it. Therefore, a two-millimeter edge may be too noticeable in the product. But the thickness of 1 mm represents a balance between aesthetics and practicality. Smaller thicknesses are not used at visible ends.

This is what the PVC edge looks like - select it.

Melamine film is more difficult to use. Therefore, conscientious manufacturers allow its use only on invisible ends. Whether you choose a wardrobe for a bedroom or a children's room, remember that whatever edge there should be on all elements and on all sides of the slab. This is really important.

The board can be covered with laminate, veneer, acrylic film or plastic, glossy or matte varnish. Laminate and veneer should not peel off from the slab. Evaluate the quality of their fit at the corners and make sure that there are no bubbles on the surface. We have already talked in detail about materials that give the effect of a glossy surface in our article.

The slab covering must fit snugly to the base of any shape.

Sidewalls are the key to strength

When choosing a wardrobe for your bedroom, pay attention to the sides. They ensure the strength of the entire cabinet. Everything is simple here: thickness 16 mm is bad, 18 mm is good, 25 mm is excellent. In addition, European fashion now gravitates towards greater thicknesses. The structure of the chipboard also affects the strength of the material. There should be three layers. The outer two are made of small chips and the inner one is made of large chips. The outer layers are denser. Their task is to cope with mechanical stress. The inner layer is looser. It is needed to hold the fittings. Everything said about the material of the sidewalls applies to any element made of chipboard: a shelf, partition or facade.

We choose the right chipboard: at the end you can see two dense outer layers and a looser inner one.

Legs are installed at the lower end of the sidewalls. If you are not 100% sure that your floors are level, then the legs should be height adjustable. There should be no fastening elements or technological holes on the outside. Modern fittings allow you not to spoil the appearance of the product. Attention to such details will allow you to choose a beautiful cabinet.

Modern fittings are not visible from the outside. The photo shows an example from the past.

Back walls: subtle but important

The rear walls differ from each other in materials and methods of fastening. A fiberboard wall nailed or screwed to the back is a cheap option. Over time, it may go away. Dust will seep into the resulting gap. To fix this problem you will have to make a lot of effort: remove all the contents and move the cabinet away from the wall.

The second option is fiberboard, which is inserted into the groove. This option is a little more expensive than the previous one, but much better because the back wall will not fall out. Behind it there remains a space in which manufacturers place stiffening ribs to strengthen the structure.

The last option is a chipboard back wall. It is tightly tied to the sides with fittings. This option is the most durable, but also the most expensive.

1) the back wall made of fiberboard is nailed, 2) the back wall made of fiberboard is inserted into the groove, 3) the back wall made of chipboard is secured with fittings.

If the back walls consist of two parts, then they are often held together with a plastic profile, and often not in the color of the back wall. There is a connection with reinforced tape on the back side. It sounds unreliable, but in fact this method is better. The tape holds the parts of the wall together well and is not visible. When choosing any furniture, remember, the fewer fastening elements you see, the better.

Get the checklist “How to choose a cabinet”

Size

Considering that bedrooms usually have modest dimensions and are intended for relaxation, most often a compact closet is installed here. The main role in the furniture composition is given to the bed.

Designers recommend choosing wardrobe models that extend upward (to the ceiling) and not to the sides for storing things. It is worth considering the option of installing a narrow cabinet-case of one or two sections in the bedroom when the room is small. These models are compact, occupying only about 0.5-1 m in width.

If there is no other place in the apartment to place household items, books, and a wardrobe, then for the bedroom it is worth purchasing a large wall with a wardrobe, open and glass-covered shelves.

Expert opinion

Olga Kovalenko

Since 2010 I have been engaged in interior design and architectural design.

Legs are installed at the bottom of modular furniture. It's good if they are adjustable.

Despite the fact that many beautiful models are made to order according to individual sizes, there are generally accepted standards for the depth of the wardrobe. Narrow designs - 45 cm, more convenient to use - 60. The height of factory products can be 1.8-2.4 m.

Bedside

A modern, functional type of wardrobe that is installed next to the bed on both sides, creating a single composition. There can be a pencil case shelf above the headboard, and high doors, open and closed shelves on the sides. On the Internet you can find many photos of such a wardrobe for the bedroom in different configurations.

In addition to dividing into types, cabinets are also classified by shape and location in the room. There are round, semicircular, radius, trapezoidal, angular, rectangular. This variety is convenient because you can choose and buy the ideal bedroom closet model for each area.

Number and types of doors

The number of cabinet opening systems depends on the size and design of the product. Accordingly, the longer it is, the greater the number of opening structures - one, two, three doors, etc. On average, a door is provided for 0.5-0.7 m.

As a rule, each leaf corresponds to the size of the internal section divided by a partition. There are exceptions in wardrobes, because sliding facades are relevant for “endless” wardrobes and built-in storage systems.

Types of cabinet doors:

• Swing. Economical and practical option. The main thing that needs to be provided is the presence of free space near the cabinet so that nothing interferes with opening and access.

• Sliding. The so-called coupes are increasingly in demand among modern consumers. They are more expensive than hinged ones, but have a stylish design and provide easy access to the contents - just move the door to the side.

• Harmonic. It is used quite rarely, often in dressing rooms. The facade consists of several vertical segments that fold like a fan when opening a large cabinet.

Closet

A sliding wardrobe is a stylish and, most importantly, convenient solution for arranging a bedroom. The main difference between a compartment and a regular wardrobe is the design of the doors. The doors do not have a hinged, but a sliding design and are reminiscent of the door mechanism of compartment cars on a train. The doors are located on special, invisible rails and move freely along them in any direction.

As you can see in the photo of wardrobes in bedroom interiors, a compartment-type wardrobe fits perfectly into both a large room and a small room. And all thanks to the fact that convenient doors allow you to use free space more efficiently.

The cabinet has increased capacity and a flexible internal design system. Most shelves are mobile; you can choose the height, quantity, etc.

It should be noted that the coupe offers a variety of design solutions and manufacturing materials. The most popular are plastic and wooden models, but they are also available from DPS and similar materials.

A mirror is often used as a decorative element. The front door can be either completely covered with mirrors or simply contain various mirror elements.

One of the disadvantages is the price. It is significantly higher than hinged cabinets. If you want to save money, you can choose furniture made from cheaper material without various decorative elements.

It is important that the filling is of the highest quality. Especially the rail mechanism. If one wheel breaks, repairs will cost almost half the cost of the cabinet, if it can be repaired at all.

Types of door mechanisms

Depending on the type of facades used, the necessary fittings are selected for them.

Options:

• On rollerskates. This mechanism is used in sliding and sliding wardrobes and allows the doors to slide right and left along special strips at the top and bottom of the structure.

• On hinges. They can be classic or with closers (then the door closes on its own). Installed on hinged cabinet doors. The more massive and wider the facade, the larger and more powerful the hinges are required.

• On gas lifts. Pneumatic lifts are popular on mezzanines, they open from bottom to top, and are often equipped with closers.

Ease of use largely depends on the quality of the fittings. Expensive products from European brands last much longer and work better than Chinese products. If the opening mechanisms are installed in good faith, then the gap width between the doors does not exceed 2-3 mm.

Facade decoration

The presentable appearance of the cabinet directly depends on the finish of the doors. Most often used for the manufacture of facades:

• chipboard;
• MDF;
• mirrors;
• glass;
• aluminum profile.

Sliding wardrobes have the greatest number of options for decorating facades, since they represent a single structure. But you can also create an unusual design on swing doors.

For decorative door decoration use:

• mirror fragments;
• stained glass;
• gloss;
• photo printing;
• multi-colored acrylic films;
• bamboo;
• sandblasting;
• 3D images and others.

Types of wardrobes for a modern bedroom

Manufacturers offer many types of cabinets, ranging from classic ones with hinged doors to ultra-modern ones with combined storage systems. The search for an ideal model should be based on studying the parameters of each type:

Internal filling

The main task of a closet in the bedroom is storage, which is why it is so important to think about the placement of partitions and sections. In a well-equipped wardrobe, clothes do not wrinkle, although they are folded compactly. Other things are also stored there - underwear, shoes, accessories.

For the functional internal filling of the cabinet, many devices are used:

• drawers;
• shelves;
• boxes;
• separators;
• baskets;
• hangers for clothes;
• clips for trousers and skirts;
• tie makers;
• devices for storing belts;
• baskets for shoes and linen, etc.

It is worth taking care of the interior lighting, especially if the closet is deep or replaces a dressing room.

Newfangled solutions

After choosing the model and functions of the cabinet, you should think about the color scheme. A white wardrobe in the bedroom will give it personality and character.

In addition, the cabinet can be decorated by decorating the facade with film, glass, appliqués or shimmer.

Imagine and create, but remember the main condition: the design must be in harmony with all the accessories in the bedroom.

Modern models 2021

The bedroom is an intimate room, where household members relax and recover after a hard day. It is important that the color, style, and model of the cabinet complement the overall interior, giving it even more elegance and comfort.

When choosing a suitable wardrobe for your bedroom, it is important to pay attention to its spaciousness, functionality and aesthetic appearance. It is desirable that the furniture in the room be made in the same color and style, all interior items are harmoniously combined with each other.