Relocating a gas boiler in a private house or apartment: is it possible, how can it be done legally, essence, cost, documents, stages, responsibility

What is the essence of moving a gas boiler

Equipment is installed in a private house or apartment only according to a special project. Without a document, the gas service will not allow the operation of the installation.

When creating a project, a number of factors are taken into account:

All installation parameters must comply with SNiP 42-01-2002.
Location of the main pipeline, as well as medium and low pressure.
Location of the boiler, stove and water heater. Check the location of all other devices and convectors, if available.
Technical characteristics of the air duct and chimney. All parameters must comply with rules and regulations. Check how the supply and exhaust ventilation works.

Project changes include the following:

laying new pipes;
transfer of gas equipment;
redevelopment of rooms;
changing the type of boiler;
installation of a water heater, oven or other appliances.

To fulfill at least one point, they make design documentation and obtain permission to reinstall the gas system. A fine will be charged for unauthorized actions.

How much will it cost to move a gas boiler?

The cost of the work largely depends on the efficiency of solving the problem. If you adhere to the established deadlines and submit all applications in advance and order the project, the amount of costs for documentation will be 15-25% lower than with urgent registration. The cost of work depends on the condition of communications, the length of pipelines, the number of bends and welds. The amount that must be paid for commissioning work and obtaining an equipment installation certificate depends on the location of the apartment; it often differs even within the same city.

How to legally move a gas boiler

All work is carried out in accordance with regulatory rules and documents. In order not to break the law, follow the following sequence of actions:

The gas service receives permission to re-equip and relocate pipes.
Employees of the organization create a project, taking into account the new location of communications, gas appliances and boiler.
They hire craftsmen from a company that has a license to work with gas devices. Employees move the boiler, install equipment and check the operation of the system. All activities are carried out in accordance with the new project, taking into account the standards and rules.
The company performing the equipment transfer work draws up a report. The document is submitted to the gas service, where the installed devices are registered and an operating permit is issued.

When remodeling rooms in an apartment or private house, a new registration certificate is initially made. Based on the document, a gasification project is being developed.

How to obtain gas workers’ consent to move a gas boiler?

Any fundamental change in the heating system should be made to the existing project. This also applies to moving a gas boiler in an apartment or private house. Permission for this action must be obtained from the gas supply organization. This process involves the following steps:

If a gas boiler in a private house is transferred to a newly built extension - a boiler room, then it should first be included in the building's technical passport.
With the technical passport of the house and the old gas heating project, the owner goes to the gas service and writes an application for the transfer of gas equipment, indicating the installation location and the size of the boiler room.
Gas service specialists develop a project for moving a gas boiler and issue it to the applicant.
Then the gas workers, in accordance with the project, carry out the transfer of equipment, connect it and check the functionality of the system.
If the gas boiler is working normally, then a certificate is issued.
With the act, the owner goes to the gas service, registers the installation location and the number of units moved.

To save money, some users of gas boilers decide to do the basic work of moving the gas boiler themselves. Such actions are not prohibited, but connecting the device to the gas main and starting it for the first time must be carried out by a gas service specialist.

Before you begin dismantling a gas boiler from its old location, it is recommended that you familiarize yourself with the documents that govern the rules for installing such a device:

SNiP 42-01-2002 “Gas distribution systems”;
“Safety rules for gas distribution and gas consumption systems”;
OST 153-39.3-051-2003 “Technical operation of gas distribution systems. Basic provisions. Gas distribution networks and gas equipment of buildings. Tank and cylinder installations.”

It is important that the new room into which the gas boiler is being moved complies with all existing standards.

Read here - rules and regulations for installing a gas boiler

What difficulties do you encounter when moving a gas boiler?

During work, a number of important points are taken into account:

Metal pipes are used as a gas pipeline, which are connected to each other by welding.
Flexible hoses, metal-plastic and plastic pipelines cannot be used to move the boiler.
In an apartment or private house, you can change the location of the route indoors when installing pipes, but you cannot touch the main line. This point is taken into account when purchasing materials and equipment.
If you are moving a gas stove or oven, you do not need to reschedule the pipeline. Install a hose of a certain length. But the shut-off valves are installed in the place where they should be according to the design.

The gas service makes the following requirements when moving gas equipment:

ceiling height in all rooms is 2.2 m and above;
the distance from the oven or stove to objects opposite is 1 meter;
the shut-off valve should be 0.2 m from the equipment;
in the room where the heater or boiler is located, there must be a door that opens outward;
an open doorway in such a room is not allowed;
within an hour there is a 3-fold change of air in the room;
You cannot install a gas boiler in the apartment’s bathroom;
if the house is built of flammable materials or wood, then a fire hydrant is installed.

How to move a gas boiler or water heater to another location

Is it possible to move a gas boiler to another room and place it in another place... Many people want to move gas heat-generating equipment - a boiler or a water heater, to another wall, for example, or even outside the room. The easiest way to do this... You should be guided by the standard SP 62.13330.2011 “Gas distribution systems”, and others to which it refers...

Is it possible to move a gas heater or boiler to another room?

You can’t just pick up and move a boiler or gas heater to another room. The gas connection to the devices is usually done with a flexible connection, which is a corrugated stainless steel tube, the so-called “gas pipe”. In this regard, there is a clause in the regulations that does not allow the flexible gas supply to cross any structures, windows, doors or other openings.

Thus, we cannot simply install a long flexible connection and use it to drag the boiler into the next room because we will definitely cross something that cannot be crossed... At this point the boiler is tied to the room into which the stationary connections are connected steel inflexible gas pipes...

Any action with gas equipment must only be done with the knowledge of the gas service.

It is prohibited to install gas equipment - a boiler or a water heater... outside of compliance with the project. And the project must be approved and agreed upon in accordance with the regulations. Moving the boiler anywhere also entails changing the documentation. Therefore, the first step, if you want to move a gas heater or gas boiler equipment, is to contact the gas service...

And then, where they will be sent..., depending on the severity of the situation and the complexity of resolving issues in a particular department. All standards can sometimes be interpreted more leniently, especially since all these documents are prone to inaccuracies and ambiguities...

Why are geysers in bathrooms in old houses?

Regulatory requirements change in accordance with new technology, new knowledge and new experience gained. Safety regulations in any area are constantly being improved.

Previously, when geysers were installed in “Stalinka” buildings, it was allowed to install heat-generating gas equipment in bathrooms. Now it’s not allowed, and no one will let you put a newly purchased speaker there. Such a project will not be developed and approved.

Another thing is that consumers manage to call the bathroom a second kitchen in documents... Indicate that there are no appliances with open water in it. During installation, remove the shower and toilet from there too....

Thus, theoretically, it is possible to install a geyser in the bathroom today. Another thing is that it needs to be serviced, and gas service personnel can quite reasonably make serious claims for violation of the operation of gas equipment if they find a shower head next to the boiler or water heater...

Is it possible to move a gas water heater from the hallway to the kitchen?

Is it permissible to remove the gas boiler from the corridor to the kitchen, where it belongs... It is recommended to place gas equipment in utility rooms, where it disturbs less with noise and does not roughen the interior. In kitchens, a gas boiler or water heater interferes with noise and cluttering up the space. But regulations allow them to be installed in kitchens.

Why is it possible in kitchens, if there is a sink, open water? Why is a sink better than a toilet or a sink in a bathroom... Gas service specialists do not have an answer to this simple question. They only know what is written in the regulations - it’s possible in the kitchen, not in the bathroom, and that’s all, and there’s no reasoning.

Why is it difficult to move a gas boiler to another room?

It is necessary to draw up, coordinate and approve the relevant technical documentation, which is difficult. In practice, you will have to dismantle, clean and remake (digest) the supply gas pipeline, lead it into the room where the new project requires installing a boiler or water heater.

However, many gas service departments welcome such customers who rush back and forth with their boilers and are ready to pay for any whim. Therefore, for those who want to move the boiler to another room, there are quite a lot of vagaries prepared from all the signing, approving and installing services.

Is it possible to move the boiler from the kitchen to the hallway or pantry...

The boiler and other gas equipment can be moved from the kitchen to the pantry or to the corridor, or to another utility, non-residential space, if a number of regulatory requirements are met there. In particular, the following is required.

The room must be equipped with exhaust ventilation, which provides three air changes per hour. This is usually provided by pipes 150 mm in diameter for a small room volume.
The structures must have inlet openings of 200 cm2. with influx from other rooms or from the street.
The volume of the room should be at least 7.5 cubic meters for one boiler up to 60 kW. The room must have a window of 0.8 m2. In this case, the height of the room must be more than 2.0 meters.

What documents are prepared for transferring equipment?

Collect the following package of certificates:

a certificate confirming the boiler’s compliance with rules and safety standards;
act on the operation of the smoke and ventilation duct;
device maintenance agreement with a one-year term;
project report;
technical passport for gas equipment;
boiler operating instructions.

How to correctly move a gas pipe in the kitchen

When all permits have been received, inspections and approvals have been carried out, gas service employees determine the day to replace the equipment. If work will be done in an apartment building, the HOA or management company will notify the owners about this. At the set time, the craftsmen will shut off the gas valve of the main pipeline that supplies fuel to the building.

Carry out work according to plan:

Close the shut-off valve on the riser.
Open all vents or windows to increase air flow into the rooms.
Turn on all the burners on the stove to burn off the remaining gas in the pipe.
The old pipeline is being dismantled.
Servicing the crane.
Install hooks to secure the new pipe.
They adjust the material and carry out welding work.
Install a shut-off valve.
Connect the devices.
The technicians go around all the apartments, warning about the opening of the tap and gas supply.
Check all welded and threaded connections after fuel receipt.
They seal the meter and draw up a report.
Paint the pipeline with protective paint.

Relocating a gas pipe in the kitchen: sequence of actions

Sometimes gas pipes get in the way of making your design dreams come true. In such cases, you have to either sacrifice the interior or move the gas pipeline. For many, the kitchen is a whole small world where you can not only eat deliciously, but also have a good rest and receive guests. For many housewives, this is the holy of holies, where they will not allow a stranger. It is clear that close attention is paid to the interior of this room. But what to do if gas pipes spoil the whole look? We'll have to think about moving them.

Content:

Before you decide to make drastic changes, you should understand the rules for operating gas pipes or boiler. Most often, a stove is installed in the kitchen, to which communications wiring is connected.

Redevelopment of a gas pipeline is a very important step. It must be remembered that if it is possible to disguise the pipe, then it is better to resort to a simpler solution

So, the norms for the location of the gas pipe and use of the stove:

The stove can be installed in rooms whose height starts from 2.2 m;
There must be a passage at least 1 meter wide between the gas appliance and the opposite wall;
The routing of gas pipes should be such that there is a gap of 7 cm between the stove and the walls;
Creating a branch to a gas appliance is possible only at the level of the connecting fitting;
The shut-off valve should be positioned at a height of one and a half meters from the floor and at a distance of more than 20 cm from the side of the stove.

If the walls and ceiling are made of flammable materials, then according to regulations, they should be covered with plaster.

All specified standards apply to already supplied pipes and devices connected to them.

Gas Pipe Relocation: Pipeline and Gas Supply Requirements

If the pipe through which gas flows is in the way in the kitchen, moving it can save the situation. But at the same time you need to know the requirements that apply to the gas system and the pipeline as a whole.

Rules for wiring and installation of gas pipes that should be taken into account when transferring:

Pipes must always be freely accessible;
You cannot hide the riser behind the casing (an exception may be if the structure can be easily removed);
The gap between the system and the floor should not be less than 2.2 meters;
The length of flexible elements should not be more than 3 meters;
Gas pipes require mandatory coating;
The places where the pipes come into contact with the wall must be equipped with construction cases protruding 3 cm beyond the plaster;
All pipeline connections must be tight and reliable.

It is also necessary to remember that when doing any work on the gas network, it is necessary to turn off the gas before starting.

Do not lay gas pipes through window or door openings, or ventilation shafts!

Planned relocation of a gas pipe in an apartment: preparatory work

To move the gas supply pipe in an apartment, in addition to carefully studying the rules and regulations for its location, you should coordinate the upcoming work with the relevant authorities. This is necessary to assess the safety of the upcoming alteration and the absence of a risk to the lives of residents.

Most often, it is during repairs that people think about moving the gas pipe; at this moment it is possible to hide the pipe or bring it to the gas stove on the other side

If you do not obtain permission to carry out such work, you will have to pay a considerable fine. And if the conditions under which the alteration was carried out do not meet the standards, you will also have to return everything as it was.

Therefore, before changing the location of the pipes, you should write a statement to the gas service, in which you need to explain the need to digest them.

You can change the location of the pipeline after performing the following steps:

A trip to the gas service at the place of registration, where they will tell you what documents are needed to obtain a work permit;
Submitting an application for approval with the reason for which the replacement will be carried out;
A visit from a gas service representative who will assess the conditions and make a decision on whether the transfer can be carried out;
If the decision is positive, review and agree on the transfer plan and estimate, which will be drawn up by a specialist;
Payments for the services of specialists, both those preparing the work plan and those who will do it in practice;
Preparing appropriate conditions in the room where work will be carried out.

When contacting specialists who will install pipes, you should make sure of their qualifications. The presence of certificates and documents indicating the re-certification and level of professionalism of the craftsmen will help with this.

After completing all work related to the movement of pipes, gas service workers are required to draw up a report on the work performed in two copies (one of which must be kept with you), and also make the necessary notes in the premises passport.

Step-by-step instructions: how to move a gas pipe in the kitchen

If everything went well with the approval of the plan and transfer of the estimate, you can expect the arrival of craftsmen to carry out work to change the location of the gas pipe.

In order for the work to be done quickly and efficiently, you need to prepare:

Contact specialists in advance and find out if you will need any consumables (by the way, when buying long hoses yourself, you should pay attention to their diameter and length, since if they turn out to be too long, it will be impossible to shorten them in accordance with the technology works);
Clear the room where it is planned to replace and install pipes - access to the network must be free;
It is better to cover all existing furniture and household appliances with some kind of non-flammable materials to protect items from dust and debris;
Before the technicians arrive, turn off the gas and take meter readings.

You should not carry out such work yourself; it is better to trust them to professionals. But for general information, you can find out how the process of installing pipes in a new place occurs.

Work order:

After shutting off the pipes, the entire system is purged to remove any existing debris;
Excess elements of the system are cut out, and a plug is placed in the hole that appears;
After this, a hole is cut where the new pipe will be;
Next, welding of pipes and installation of taps begins;
All joints are sealed with tow;
The device is connected to the network.

After completing these works, it remains to check their quality.

Under no circumstances should you check for a gas leak by holding a lit lighter or match to the connections, otherwise the entire house may explode!

To check for leaks, you need to prepare a solution of soap and water, which you need to apply with a brush to the pipes and connecting places. Bubbles will appear where gas leaks out. If everything is in order, all you have to do is wait until the pipes dry and coat them with paint to avoid metal corrosion.

By the way, if you are denied the transfer of the gas system, do not be upset. As a last resort, you can buy a beautiful box for pipes and hide them there, giving the room an aesthetic appearance.

Rules for moving a gas pipe in the kitchen (video)

The gas system is a serious object that must be handled with great care. If you need to change the location of the pipeline, it is better to seek help from specialists and do everything according to the rules in order to avoid possible troubles in the future.

heatclass.ru

How to move a gas boiler in a country house

The work is being carried out in stages. All rules and regulations are taken into account so as not to receive a fine later.

First stage: application for approval of specifications

They go to the city or regional gas service at their place of residence. Submit an application for approval of technical specifications. If the equipment will be changed: boiler, stove or water heater, a project will also be drawn up. You can simply take permission and do the design yourself.

The statement states:

information about the boiler brand;
future location of the device;
volume of gas consumed - approximate values are specified in the technical data sheet of the equipment.

If there is no confidence in the correctness of the data, then the calculations are carried out by Gorgaz specialists. To do this, submit a separate application.

When the application is processed and the necessary calculations are completed, the owner will be able to receive the technical specifications. He just shows his passport. The application is processed within 10 working days.

Second stage: obtaining technical specifications

The “Technical Specifications” stipulate:

all the rules and regulations that the owner must comply with when moving a gas boiler;
requirements for the smoke and ventilation system are also included;
indicate where the boiler and meter should be located.

Third stage: creating a project

If the new device will not be transferred, then design documentation will not be drawn up. But there are a number of exceptions:

2-3 families live in the house;
housing is intended for private use;
The building has more than 3 floors.

If the project is drawn up independently, then the gas service is provided with a diagram showing the installation schedule:

boiler;
chimney;
ventilation;
slabs;
water heater.

Add additionally:

installation diagram of the gas pipeline and communications;
certificate of conformity;
act on checking grounding circuits;
boiler technical certificate;
operating instructions;
annual service agreement.

Stage four: agree on project documentation

The finished project is drawn up. The document is approved by the city gas service. The project takes from 7 days to 4 months to be approved.

If all requirements are taken into account, the owner receives approval. They issue a document that is certified by the city gas agency. According to the permit, you can begin moving the boiler. If they refuse, they check all the documentation and correct errors. Afterwards, all the papers are submitted again to Gorgaz.

Fifth stage: remove old equipment

Dismantling is carried out only by specialists licensed to work with gas devices. First, disconnect the old boiler from the gas pipeline and water supply. Turn off the heating system. Drain water from all pipes.

You can contact GORGAZ through the website

Stage six: installation of a new device

Installation is also carried out by a licensed professional. He must have permission to work with gas devices. But there are no clear instructions that a homeowner cannot independently install a new boiler.

If the standards are violated or the rules for replacing gas equipment are not followed, the special service may stop the gas supply. Therefore, it is better to entrust the work to licensed specialists.

Preparatory activities:

water and gas pipes are brought to the new location of the boiler;
install an outlet near the future device;
a shield made of fire-resistant material is attached to the wall;
a fireproof base is laid on the floor or a concrete screed is made;
a hole for the chimney is drilled in the wall;
remove flammable items from the room.

Installation of attachments:

Install the pipes into the chimney with a slight slope to prevent condensation from accumulating. The coaxial device is inserted into the prepared hole and fixed. The cracks are filled with polyurethane foam.
Mark the installation location of the device on the wall. Fix the brackets.
Hang a wall-mounted boiler. If the equipment is floor-mounted, then it is installed on a concrete base.
The unit's pipe is secured to the chimney using a special elbow.
Connect the heating system and water to the boiler circuit.
They install a gas pipeline - use a flexible metal hose for this purpose. A worker from the gas service connects.
Plug the unit into an outlet and secure it to ground.
Check how the system functions.
They invite a professional to launch the device.

Seventh stage: test

Conducted by a professional:

Carefully inspects the boiler.
Checks connections on pipes.
Performs a test run of the device.
Checks for faults and shortcomings.
Monitors the operation of equipment.

If the check is successful, the specialist draws up a report, which is submitted to the city gas service. If there are malfunctions, the errors are eliminated. The equipment is checked and adjusted again. An act is drawn up.

Eighth stage: service notification

Gorgaz reports the successful transfer or replacement of the boiler. Write a statement within 5 days after the inspection. A service agreement and an inspection report are attached to the application. Additionally, there must be a document indicating that the ventilation is working properly and turned on.

A service employee will come and put a seal on the meter. The owner will be able to use the new boiler and other appliances.

Moving a gas pipe: how to move it in an apartment in accordance with the standards

The installation of gas communications in an apartment is subject to certain requirements, therefore, independent installation and connection of equipment, as well as moving the gas pipe to another place, is strictly prohibited.

All issues regarding the laying of internal and external gas pipelines are resolved by the gas service, without whose permission you can only move the slab connected by a flexible hose 0.4 m to one side.

Reasons for moving gas pipes in the kitchen

All work on moving and replacing metal pipes, especially those requiring welding, is carried out by representatives of Gorgaz or another authorized organization. Having received an application from residents, they are always interested in the reasons for the planned transformations.

Most often, it is necessary to change the piping in the kitchen without changing the layout or moving equipment to other rooms. The reasons may be different:

replacing old equipment - purchasing a gas water heater, stove or boiler - which requires a little more space;
major renovation in the kitchen;
moving the gas stove from the window 0.5-2 m towards the sink;
changing the installation location of the gas meter;
moving a horizontal pipe from a great height under a table top, etc.

Often, the relocation of pipes is required in new buildings, where the original location of significant kitchen objects defies logic and explanation: suppose, if in a 15-meter kitchen the gas stove is located near the window, the sink is in the opposite corner, and the hood is on the other side, above the entrance to the kitchen. We have to correct the design mistakes and move the stove closer to the sink so that food can be cooked in comfortable conditions.

It is strictly forbidden to carry out work to move the gas riser. The only change allowed is to disguise the pipes with easily dismantled structures, for example, wall-mounted kitchen cabinets

The most common reason is the purchase of a new kitchen set with built-in equipment (oven and hob). In this case, the pipes need to be either shortened or lengthened, depending on the planned installation location of the devices.

If you want to find out how best to move a gas pipe in an apartment with redevelopment, we recommend contacting a design organization to draw up a transfer plan. The fact is that in typical city apartments it is prohibited to reinstall risers, pipes, as well as any gas equipment in living rooms, and even to combine a kitchen and a room, permission is also required.

Obtaining approval for gas pipeline replacement

Whether a transfer is possible or not can only be decided by authorized bodies, that is, the gas service of your city (district). Only a qualified specialist has the right to carry out any dismantling and installation work. Of course, pipes cannot be moved without approval.

Even such a simple step as cutting a pipe by 10 cm must be approved, since all work related to the gas pipeline falls into the risk category

The permit is issued in the following sequence:

Find out the contact details of the gas service at the place of registration, contact specialists, explain the situation, and consult.
You draw up an application (using a standard form) that will “launch” the approval process.
Based on your application, a gas service representative will arrive at your home. The time will be confirmed in advance.
The specialist performs an inspection, listens to wishes, and answers questions. Often at this stage it is necessary to change plans, since the desired transfer does not meet safety requirements (a preliminary study of the gas pipeline installation standards will eliminate this unpleasant moment).
Approval of the final transfer scheme, drawing up an estimate. All documents are prepared by the organization providing the services. No work will be carried out without the consent of the property owner.
If the transfer conditions are met, pay for the service using a receipt and agree on the start time of the work.

The approval procedure usually takes several days; it can drag on for a long period for only one reason: if the property owners and representatives of the gas service have not found a compromise solution. Any factors that violate the installation standards for gas stoves (boilers, meters, water heaters) may cause refusal to move pipes.

General requirements and standards

To ensure that the approval process goes smoothly, it is better to familiarize yourself in advance with the basic provisions for installing a gas system in residential premises. As a cheat sheet, you can use the regulatory document - SNiP 2.04.08-87* (current version).

The room must have natural supply and exhaust ventilation, that is, there must be a window with opening vents/transoms and a ventilation duct with good draft

If the walls and ceiling consist of flammable materials (wood), they must be plastered or lined with metal sheets.

Gas pipes are used to transport fuel to consumers - stoves, ovens, columns, so the location of the equipment is no less important than the pipe layout.

The height of the ceilings in the room where the gas stove is installed should not be less than 2 m 20 cm. If it is an attic or an extension with a sloping ceiling, choose a place that is suitable according to the standard parameters. Distance from the stove to objects located across the passage (for example, to a table) , must be at least 1 meter. This facilitates free movement around the kitchen. The shut-off valve element - the tap to turn off the gas supply - should be located at a distance of 0.2 m from the stove (it can be installed on a pipe hidden under the countertop, at a height of 0.75-0.80 m) Room, in which a gas stove or water heater is installed must be separated from the adjacent room/corridor by a door. It is prohibited to leave the opening to the living room open. The gas stove must be moved away from the wall covered with non-combustible material by at least 0.07 m. If the equipment is installed in a corner, the rule applies to both walls. To connect the gas pipe and the household appliance, the use of flexible hoses (rubber-fabric hoses, bellows hoses) A fitting is used to connect the consumer (oven, stove) and the gas pipeline. The liner is carried out at the height of its location. Pipes for internal wiring must be made in accordance with GOST 380-88 (for products of ordinary quality) or GOST 1050-88 (for products made of high-quality steel) Standard ceiling height in the kitchen Dimensions of the passage for a gas stove Distance from the stove to the tap Insulation of the room with gas equipment Distance from the stove to the walls Method of connecting gas equipment Height of connection of the pipe to the stove Quality of pipes for connecting the equipment

You also need to know that the shut-off valve cannot be cut off from the pipe. This is a mandatory element of the gas system. Moreover, when changing the location, you need to make sure that it is in direct access. If it is placed under the countertop, then access should be through the cabinet door (without the back wall) or through an opening section of the countertop.

Guide for performing transfer or replacement

It is not recommended to change anything yourself, even flexible eyeliner. All the more so, cutting, extending or moving pipes should be carried out by a representative of the gas service. However, knowing the sequence and some nuances of actions when working with pipes will not hurt the homeowner.

#1: Preparing to work with pipes

Usually a team of workers (most often 2 people) arrives within the next week after approval. By this point, it is already known which sections will be dismantled or extended, and whether additional equipment will be installed. Let's look at what else is worth considering.

Taking this opportunity, you can install a gas meter or completely replace outdated equipment. If additional installation is planned, workers must be notified in advance

All equipment used in the kitchen belongs to the owner of the apartment and is purchased at his expense, therefore, it is better to immediately ask what else needs to be purchased for moving appliances and working with pipes.

If we are talking about connecting a stove or oven, you will have to buy a bellows hose of a certain length. Installers bring metal pipes with them, their cost is included in the total payment for services.

To avoid any hiccups and for the work to proceed quickly, you need to free up space from excess furniture or other items. Anything that cannot be removed must be covered with thick, non-flammable material.

#2: Dismantling the old structure

Most likely, when moving the pipe, you will need to cut off a piece of the old one and build a new one, but in a different direction. To do this, the master, using a special tool, removes unnecessary sections of pipes.

The qualifications of the craftsman authorized to move pipes are of great importance. Mechanics and electric welders undergo special training and certification, after which they receive the appropriate certificate

When dismantling the branch leading from the riser to the consumer, it is necessary to leave a small area on which the gas valve is attached. This horizontal piece of pipe cannot be removed or changed. The only exception is if the pipeline is damaged and requires complete replacement.

Sometimes residents of the top floors require the removal of a large piece of pipe that rises 1.8 m from the floor to the ceiling and then bends down 180°. It is strictly prohibited to cut the pipe and install a tap on the remaining section. The only way out is to weld the pipe so that the tap can be installed under the countertop, at a height of 0.75 m.

#3: Options for changing gas wiring

The transfer of pipes always follows the same pattern: they are moved parallel to the ceiling or walls, since diagonal and any crooked placement is prohibited. Consequently, most often the branch from the riser is lowered down, under the tabletop (rarely raised), or the vertical fragment is moved to the right/left.

A popular option for masking gas equipment: a faucet, which is easily accessible, is installed on a pipe passing below the countertop. A bellows hose is stretched from the tap to the device

When changing the direction of pipes, remember the following rules:

internal gas distribution is an open system, all covering elements are camouflage in nature and should not be firmly fixed;
It is prohibited to lay pipelines through ventilation ducts, as well as doors and windows;
metal structures are predominantly used; flexible connections are allowed in equipment connection areas, but their length should not exceed 3 m;
a rigid method of connecting pipes and hoses to pipes is used;
Pipe transitions through walls/partitions are equipped with special adapters - sleeves.

Any work related to the transfer of pipes must begin with shutting off the gas. The organization providing the services is responsible for this.

#4: Welding metal pipes

According to SNiP standards, any changes in the position of pipes must occur by welding. Detachable connections between two sections are prohibited. Threaded connections are used only when installing gas meters, household equipment and shut-off valves.

During the welding process, the worker must use only serviceable tools and use protective equipment: work clothes made of thick material, goggles (mask), gloves

Places burned by welding have an unpresentable appearance and also require protection against corrosion. After finishing the work, they must be treated with waterproof metal paint, matched to the color of the walls.

#5: Using Bellows Hoses

Before extending or moving a gas pipe, it is necessary to consider the option of installing a flexible transition. This is done using a bellows hose.

When choosing a flexible eyeliner, pay attention to its type. It is indicated in the technical specifications and is designated “fitting-nut”, “nut-nut”, “fitting-fitting”

Previously, rubber and rubber-fabric products were used, but the bellows turned out to be stronger than outdated materials. At its core, it is a metal or composite corrugation, but it has unique qualities.

For a long period of time, it maintains tightness and elasticity even under active mechanical stress. The structure of the shell is preserved even under high pressure of the transported medium or under constant mechanical stress.

The installation of bellows connectors is also carried out by a gas service worker. He connects boilers, columns, stoves and ovens in accordance with all the rules of the PUE and, if necessary, uses adapters and seals, for example, FUM tape.

Conclusions and useful video on the topic

With the advent of long flexible hoses, moving the internal gas pipeline has become less relevant, but in some cases you still have to contact the gas service. The most common reasons for requests are in the video presented.

Secrets of masking gas pipes:

About moving the pipe and tap:

Welding work and moving the meter:

Finally, about the consequences of illegally moving gas pipes. If you plan to cut off a piece of a gas pipe or connect household equipment yourself, you should be aware of administrative and criminal penalties. The minimum fine for unauthorized work is 2 thousand rubles, and if a person is injured as a result of improperly carried out work, he faces up to 5 years in prison.

sovet-ingenera.com