Geyser Ariston: operating instructions, installation, connection

The Italian brand Ariston got its start in 1960. It was during this period that the family enterprise for the production of scales began producing electric water heaters. Since 1980, the production of boilers running on gas has been launched. Since the end of the twentieth century, the company has opened representative offices in Russia and China, becoming a global brand.

Ariston gas water heaters of instantaneous and storage type are sold in more than 150 countries, including the Russian Federation. The boilers are easy to use, have a well-thought-out internal design and high build quality. Consumers are offered instantaneous and storage water heaters.

Geysers Ariston

Boilers use the principle of flow-through water heating. Several lines of speakers are produced, classified according to the following criteria:

Combustion chamber type - there are two basic modifications: atmospheric and turbocharged columns. Each option has its own characteristics:
Ariston turbocharged geysers with a closed combustion chamber - the operating principle is based on the use of forced air intake (from indoors or outdoors) and exhaust of combustion products. Pressure is pumped up by fans installed inside the case. Gas turbo water heaters are equipped with a modulating burner that automatically changes power depending on the water pressure.
Ignition principle - Ariston gas instantaneous water heaters are available in two versions. Automatic and semi-automatic speakers are available to consumers. The series have the following differences:
Automatic - in the design of Ariston flow-type gas boilers there is no igniter. Ignition is carried out by means of a spark produced directly onto the burner.

Additionally read:

Geyser VAILLANT atmoMAG pro
The solenoid valve of the geyser does not work

There are several types of automatic hot water heaters, differing in the principle of producing a spark to the burner:

Ignition features: how to turn on the Ariston column

A geyser is a typical analogue of a water heater. The water is instantly heated using a flow-through water heater. The column allows you to use hot water constantly.

The type of ignition of modern geysers, although considered simple, raises many questions for many users after direct installation.

It is very simple to ignite the Ariston column, since it can have piezo and electronic ignition, which requires the user to simply open the tap. The device needs to be turned on only after it is installed. After this, the column will work smoothly.

Features of Ariston speakers:

Compactness;
Stylish and compact design;
Available in different colors;
Automated.

Interestingly, many modern geysers can be powered by batteries. When choosing a column, you need to pay attention to its ignition methods and installation options. In any case, for safety reasons, the old gas water heater should be replaced with a new and modern one.

How to use an Ariston gas water heater

The operating instructions provide detailed recommendations from Ariston regarding:

installations and connections;
settings;
first and restart;
replacing batteries and cleaning the water heater.

Careful adherence to the described rules increases the life of the gas boiler. Application of the recommendations is a prerequisite for placing an Ariston gas water heater under warranty service.

How to install a speaker from Ariston

The connection is made in accordance with the current SNiP and PPB. No operating permit is required. When completing a gas supply project, it is enough to provide the number and model of the boiler. Connecting the column and storage tank must meet several requirements:

For the room used as a boiler room - the ceiling height is at least 2.2 m; total area from 9 m². It is necessary to have a vent or an opening window, natural supply and exhaust ventilation.
Wiring diagram - the basic connection plan is given in the technical documentation. Before the column, cut-off valves are installed on the supply and return pipelines. A water filtration system is required.
Fire requirements for installation - the Ariston boiler is hung on a wall made of non-flammable solid material. Wooden surfaces are protected with basalt wool and asbestos or galvanized sheets. When the pipeline passes through the ceilings and roofing pie, fire breaks are provided.

Note!

Gas water heater draft sensor

Ariston gas water heating equipment is not installed in bathrooms, directly above the sink and refrigerator. The connection is made by representatives of the manufacturer’s service department or a Gorgaz specialist.

How to set up an Ariston column

Ariston water heating equipment has simple controls. In columns with a modulating burner, the water temperature is set. After this, the column and storage tank will independently change the heating intensity, depending on the pressure in the pipeline and the number of simultaneously open water consumption points.

Adjustment of the geyser with a conventional classic device is carried out using two mechanical regulators located on the front part of the casing. The left handle regulates the intensity of gas combustion, the right handle regulates the flow rate. The display shows the water temperature. Using regulators, the heating is adjusted so that there is no need to add cold water when washing.

Ariston dispensers provide the ability to convert to liquefied gas. During the conversion, the nozzles are replaced and the water heater is switched to propane.

How to turn on the Ariston speaker

Mains-powered water heaters are pre-connected to an outlet. To start the semi-automatic model, the fuse is lit. To start the Ariston column, just open the hot water tap. The main burner will automatically ignite.

After closing the water supply tap, the column will turn off. The first start-up of a flow-through boiler takes place in the presence of a Gas Service inspector. A mark indicating commissioning is placed in the technical passport. From this moment on, the equipment is under warranty.

How to change batteries in an Ariston speaker

Batteries have to be changed every 4-6 months. The batteries are replaced as follows:

At the bottom of the case there is a compartment for installing batteries;
the lid is closed using a rotating mechanism;
batteries are placed in accordance with the indicated poles.

After closing the lid, the batteries bring the water heater into working condition. For convenience, batteries can be used instead of conventional batteries.

How to clean an Ariston column

The water heater is serviced every 2-3 years. The heat exchanger of the Ariston column is washed to remove scale and soot from the radiator fins. Cleaning is carried out as follows:

the carbon deposits are washed off with a hard brush with long bristles; for cleaning, use a regular soap solution;
scale is washed out of the coil using special chemicals using pumping equipment;
A special inspection hatch is provided for cleaning storage tanks.

At home, you can wash the heat exchanger using improvised means: acetic or citric acid.

Reviews of Ariston gas water heating equipment reveal several advantages and disadvantages of the product:

Pros - there are service centers in all major cities of the Russian Federation. Dispensers and storage tanks in domestic operating conditions last at least 8 years.
Disadvantages - spare parts are not freely available; they can only be ordered through official representative offices of the company. The flow sensor often fails. If the settings are incorrect, the batteries only last 2 months.

The installation and configuration of the Ariston gas water heater must be carried out by representatives of the service center. With a qualified connection, the disadvantages described above are minimized. Service life directly depends on proper installation.

Starting the device and adjusting the temperature

To correctly set up hot water in the device, you must:

Open the hot water mixer fully;
Using the water switch, select the required temperature value;
Close the tap.

According to the advice of professionals:

Wait for the moment when the pressure in the line drops, but the column will still work;
Turn the water toggle handle to the maximum;
Turn the gas regulator to the minimum value until the temperature is as desired.

For final preparation, it is worth adjusting the gas supply. To do this, you need to look at the technical data sheet and find out the minimum value for this brand.

The toggle switch is turned to the minimum value.

Turn on the gas supply valve. At the gas water heater, Electrolux and Ariston do this after connecting to the network. The Oasis, Junkers and Bosch gas water heaters are connected when the batteries are installed.

The hot valve is turned on and the device starts working.

How to adjust the water temperature

Turn on the mixer and check the water heating temperature. It must be twenty-five degrees more than the original one. It is worth noting that the water in a gas boiler heats up gradually. The geyser is adjusted using the gas lever.

Professionals do not recommend heating water above fifty-five degrees. This has a bad effect on the device, as scale forms.

Blood pressure problems

Setting up a geyser requires some time. Accordingly, the result will be visible later. After each stage, it is worth pouring out the water and letting it heat up again so that the values are correct. Low pressure in the device may interfere with normal operation.

Why you should choose a gas water heater from Ariston

If you have problems with blood pressure, you should perform the following manipulations:

Remove the casing from the device;
Loosen the locking bolt, use a pressure gauge to check;
Remove the seal from the adjusting screw;
Turn on the boiler;
Set the values to maximum, unscrew the hot water supply taps;
Adjust the desired pressure.

The Bosch gas water heater, namely its pressure in the nozzles, is regulated in the following way:

Remove the casing;
Attach a pressure gauge;
Loosen the locking screw;
Attach a pressure gauge to check the pressure in the injectors to the nozzle.

Next, the Bosch gas water heater with maximum thermal power is regulated:

Remove the seal from the screw;
Turn on the device;
Hot water taps are turned on;
The adjusting screw adjusts the pressure in the nozzles;
Put the seal in place.

There are brands that have a special “Winter-Summer” mode with temperature adjustment. This handle was made at the bottom of the Ariston gas water heater. Adjustment of the Oasis gas water heater is located on the front panel. The peculiarity of the mode is that in winter the power is higher than in summer. The heating power of the liquid in the column is directly related to the temperature of the inlet stream. In winter, the regulator is set to “maximum”, the heating will be at its highest. In summer, the temperature of the inlet flow is higher and is set to the minimum position. This saves resources.

It is easy to remove bad pressure when checking.

To do this, you must perform the following manipulations if the device has already been used:

Pay attention to the rubber membrane. The performance of this part is directly related to the pressure in the line

At the moment the integrity of the membrane is broken, namely when it is exhausted, gas does not flow and the burner does not turn on. The problem is solved by replacing the part. Pay attention to the mesh filter. It is located at the entrance to the water block. The water pressure becomes lower due to debris clogging the part. The problem is solved by cleaning.

Connecting a gas water heater to the water supply: organization and documentation

The first thing you will need to do is contact the housing and communal services department and ask for a water, gas and smoke removal plan. If a gas appliance has already been installed in the room, you will still have to obtain a plan to determine exactly where the appliance should be installed.

If you need to connect a gas water heater to the water supply, it is better to seek qualified help from a specialist

Once you receive all these plans, you will need to go to the city gas service with a statement indicating a request to replace the old appliance with a new one. The application must be accompanied by a request for repair or replacement of gas and water pipes. After all replacement and repair work has been completed, the owner must receive a certificate of work performed and the column installed in its place.

A more complex process will be installing a gas appliance in a new location. Such work involves changing the location of all the necessary pipes and, accordingly, the chimney.

In order to carry out this work, the following documents will be required:

Column installation project;
Model name and preferably technical data sheet;
Document on the condition of the chimney;
A number of documents that confirm ownership of property;
A statement indicating the request for reorganization;
Application for construction work.

After all documents have been confirmed and signed, workers will carry out installation work, set up and connect the column. Upon completion and after sealing the meter, you will need to receive a certificate from technical supervision and the fire service, as well as a separate document stating that the device can be used. In the end, you will definitely need to contact the BTI so that they can submit a new design for the premises.

How to connect a gas water heater to a water supply: basic requirements

If you study the regulations, you will see that geysers can only be placed in a few rooms. These include the kitchen and non-residential space. Before the legislation was changed, this list also included the bathroom. Also, in the process of choosing a space, you need to focus on its size, it should be from 8m3. The ceiling height must be at least 2 m, and the walls must be made of fire-resistant material.

Installing a geyser on wooden walls is strictly prohibited.

If the walls are made of a material that is classified as fire-resistant, then in the place where the column will be located there must be a layer of heat-insulating cardboard.

As for hanging, it must take place according to certain rules. The side panels should be located at a distance of 15 cm relative to the wall. The front side must be at a distance of at least 0.5 m from surrounding objects.

In order to connect the device, you need to correctly install the chimney pipe. It must be made exclusively of stainless steel. Aluminum is prohibited. There should be a yellow tap next to the gas water heater, which serves to shut off the incoming gas.

If it is impossible to install a shut-off valve, then installing a geyser is impossible.

It remains to mention the pipes for hot and cold water supply. To conduct cold water, you need to make a separate pipe from the riser. The same type of pipes lead to the bathroom. For hot supply, it is better to choose a copper pipe; its diameter should be approximately 15 mm.

How to turn on an Ariston gas water heater - instructions

To organize the use of hot water, many resort to installing geysers.
In order for this unit to serve for a long time, you should choose a high-quality model from a reliable manufacturer. One of the best examples of such technology is the Ariston gas water heater.
These devices function perfectly in difficult operating conditions. The company has been producing them for more than 60 years and fully complies with all technical requirements.

Installation of a gas water heater

Before starting installation, you need to decide at what height the column will be located, this fact is especially important if there are small children in the house. Make sure the fastenings are secure. Using a drill, make holes in the wall and you can screw the column using self-tapping screws.

Before installing a gas water heater, you should first prepare all the necessary tools for work

In order to connect the column to the chimney, you need to purchase a flexible corrugation. On one side it should be attached to the outlet, and on the other to the column. As for connecting to gas, it is better to use a tee; it needs to be cut into the gas pipe and therefore welding is not necessary.

If your tee is threaded, this makes the task easier; it simply screws in, creating a reliable connection.

Connecting the column to water also requires installing a tee. It also crashes into the pipe and after that a Mayevsky tap is installed on it to regulate the water pressure.

The operating instructions for the gas boiler include explanations on how to connect it to the water supply, how to turn it on and how to light the flame with your own hands. Each action has its own diagram, and there are training videos on the Internet. But let us remind you once again that the installation and connection of the water heater must be carried out by specialists, since each geyser has its own characteristics.

The design and principle of operation of the Ariston column

There are atmospheric and turbocharged gas appliances. Atmospheric engines are equipped with an open combustion chamber, while turbocharged engines have a closed chamber. We reviewed the rating of the best flow-through geysers here.

Ariston specializes in the production of boilers and water heaters of both the first and second types and is a leader in the market for the production of water heating devices. We recommend that you familiarize yourself with the nuances of connecting an Ariston gas boiler.

Of the entire model range of the brand, the following models are in greatest demand, according to customer reviews:

Ariston Fast Evo is a modern water heater with electric ignition and an open combustion chamber, with a built-in flame control system that allows you to maintain a constant temperature in it.
Ariston Marco Polo Gi7S is the most powerful model with electric ignition and a closed combustion chamber, with electronic control and an overheating protection system.
Ariston CA 11P is a flow-through gas water heater with a piezo ignition system and an open combustion chamber, which is simple and easy to use and belongs to the budget price category.

Despite the diversity of the Ariston model range, all devices have a similar structure, differing only in design and minor differences in design.

In order to understand how to properly use an Ariston gas water heater, let’s look at its structure.

A water heater consists of the following main elements:

water block;
gas-burner;
the combustion chamber;
heat exchanger;
chimney;
fan (if it is a turbocharged model);
sensors for monitoring fuel supply, water temperature, traction, etc.;
control Panel.

In addition to the basic configuration of the Ariston gas water heater, the device includes gas supply channels and pipes through which water flows.

On the front of the boiler body there is a control panel that allows the user to control the operation of the device and set the necessary parameters; there are gas and liquid flow regulators. An LCD monitor can also be located here to display the water temperature.

To briefly describe the principle of operation of a gas water heater, it is as follows: gas, burning inside the device, heats tap water, which passes through a heat exchanger and then drains through the tap. You can read more about the principle of operation of a gas water heater in this material.

Review of geysers by manufacturer

The market for gas water heating appliances today is very wide: it is represented by various models for every taste and budget. Despite this, there are companies whose products are most popular among users. These manufacturers have proven themselves by producing high-quality, reliable, easy-to-maintain equipment. Below is a list with a brief description:

"Electrolux" (Sweden). The speakers have a modern design and various additional functions.

Electrolux GWH 10 NanoPlus 2.0

"Bosch" (Germany) is a leader in the production of low-power water heaters. At the same time, the speakers of this company have unique patented technologies.

Bosch Therm WR10-2Р

Prices for popular models of Bosch gas boilers

Bosch gas boiler

“Gorenje” (Slovenia) is a manufacturer of high-quality economy class devices. Simple speakers without external or functional frills, and reliable.

Gorenje GWH-10NNBWG

"Hyundai" (South Korea). The company is known not only for automobile production, but also for the production of geysers. Among them, special attention should be paid to high-power models: they can heat water for a large room, which has more than one bathroom and kitchen.

Hyundai H-GW1-AMBL-UI306

"Thermex" (Russia). This company specializes exclusively in water heaters and their accessories. The products are durable (about 15 years) and have affordable prices.

Thermex Grand G 20 D

Prices for popular models of Thermex gas boilers

Thermex gas boiler

"Ariston" (Italy). The brand merged with Hotpoint, but the right to produce water heaters remained with Indesit. The speakers from this company are attractive on the outside and functional on the inside.

Ariston Superlux Dgi 10l Cf

Prices for popular models of Ariston gas boilers

Gas boiler Ariston

“Neva” (Russia) - domestic speakers, characterized by an affordable price, simple design and good service. There is also a minus: the materials used in manufacturing are not durable. Because of this, sometimes it is necessary to repair the column.

Neva Lux 5514

Find out which gas floor heating boilers to choose for a private home in a special article on our website.

Setting up the device when connecting for the first time

When you turn on the Ariston household gas water heater for the first time, it must be configured accordingly. All issues related to the installation of the device are described in detail in the operating instructions .

The manual includes explanations on how to connect the device to the water supply, turn it on and light the flame. Each action has its own scheme, which must be strictly adhered to in order to avoid problems when using a instantaneous gas water heater.

Correct setting is carried out according to the following algorithm:

Adjusting the water flow - at this stage the water flow should be adjusted; it should be made minimal (the optimal value is 6, 10 or 12 liters). If this step is not completed at the very beginning, then the entire installation will be inaccurate.
Adjusting the water temperature - the mixer supplying hot water must be turned/opened to full power. Moreover, it is only allowed to turn on one valve/open one tap in the entire room. Next, the water temperature is adjusted, after which the tap is closed.
Adjusting the gas supply - for this you need to clarify the minimum parameter of the unit (you can find it in the data sheet of the Ariston dispenser). To regulate the gas supply, the toggle switch returns to minimum and the gas supply valve opens.
The next step is to open the hot valve . After this, the water heater immediately starts working - experts recommend waiting for the pressure in the line to drop before starting installation, and then turning the gas regulator to the minimum value until the optimal temperature is reached.
The final stage is adjusting the hot flow . First you need to open the mixer and evaluate the heating temperature of the flow, which should be 25 degrees higher than at the outlet. Since the gas boiler heater heats the water gradually, you need to wait.

Experts recommend not increasing the temperature of hot water above 55 degrees, since in this case scale deposits will begin in the heat exchanger, which can negatively affect the operation of the device. And over time the column will need to be cleaned.

Mandatory Precautions

Any purchased equipment comes with instructions for proper operation of the gas water heater. The principle of operation of most of them is identical to that stated above, but here the red line should be highlighted by mandatory compliance with safety precautions.

It is necessary to carry out preventive cleaning
of the gas water heater in order to avoid disruption of the efficiency of its operation (you can read how to do this in the document that comes with the gas water heater - instructions).
It is important to check the condition of the chimney ducts - this will help avoid blockages.
If the device fails, you should immediately contact the gas service
. Trying to fix the problem yourself is prohibited.

The activation of the unit is shown in more detail in the video:

It is enough to understand once how to light the device to ensure comfortable and instant heating of running water. And then you can simply enjoy the operation of this convenient heater.

Let's look at the example of Bosch gas instantaneous water heaters WR10.B, WR13.B, WR15.B, manufactured in Germany, for the markets of Russia, Ukraine, and Belarus. These models differ in the amount of heated water.

Bosch WR10.B, WR13.B, WR15.B

Before starting, check that the gas and water valves are open and that two 1.5 V type R batteries are inserted. These heater models are equipped with electric ignition, as indicated by the B index at the end of the name. Electric ignition occurs using batteries.

To turn on the device, you need to press the power button on the front panel of the device; the speaker is ready for operation and is in standby mode. In order for heated water to flow, you just need to open the tap. At this point the pilot flame ignites and four seconds later the main flame ignites, so the pilot flame goes out after approximately twenty seconds.

These devices do not have a constantly burning wick, which is economical since there is no constant gas consumption. If there is a long break in operation, air may accumulate in the gas system, which will prevent the igniter from working properly and, as a result, the main burner will not be able to ignite.

To fix this problem, you need to open and close the hot water tap several times. Adjustment of water heating occurs by reducing its flow; by turning the valve clockwise, it decreases; counterclockwise, respectively, vice versa, the flow increases and the temperature decreases. At a low water temperature, gas costs are reduced and less scale is formed in the heat exchanger.

In the video, in addition to the startup procedure, you can also learn about setting up the speaker:

Ignition of the water heating device

Depending on the model of the geyser, you can light it in three ways:

manually - using a piezoelectric element or matches (relevant for older speaker models);
electric ignition (from batteries or from a 220 V network);
from a hydraulic turbine.

Manual ignition of the column is possible using matchesif we are talking about an old-style model.

Before turning on such an Ariston gas water heater, you need to perform the following steps:

Open the water supply tap connected to the device.
Turn the main valve to allow fuel to flow to the igniter.
Light the wick with matches.
Turn on the gas regulator.

This ignition method is not absolutely safe. Therefore, it is necessary to follow all safety rules and keep children away from the device.

The manual version using piezo ignition is more convenient. Simply press a button to light the wick in the combustion chamber. Water heaters with piezo ignition do not need to be turned off completely - when the water is turned off, only the wick will burn. Disadvantage of this method: increased gas consumption.

Devices with automatic ignition are the safest and most convenient to use. The latest models of water heating equipment are equipped with this option.

Detailed instructions for turning on an Ariston brand column with automatic ignition:

Make sure the cold water inlet valve to the water heater is open.
Make sure the gas valve is also open.
Check that the batteries are installed correctly (1.5 V LR20).
Turn the adjustment knob between the minimum and maximum positions.

To turn off the gas water heater, simply close the hot water tap. If you want to completely turn off the gas water heater, you first need to turn the handle (on the control panel) to the OFF position all the way. Then turn off the gas valve on the pipeline.

After complete removal of water, close the water valve on the water supply in front of the gas water heater.

Common Questions

Why doesn't the gas water heater turn off?

If a gas water heater turns on spontaneously, the cause is often a leak in the hot water pipeline. After fixing it, the problem will disappear. However, this situation occurs extremely rarely; much more often, the user is faced with the fact that the column continues to work even after the tap is closed. This is due to the diaphragm located inside the water regulator or “frog” becoming hardened and losing its elasticity. After turning off the hot water supply, the membrane does not rush to return to its place and continues to press on the rod, which opens the fuel supply. The problem is eliminated if you replace the faulty membrane.

Is it possible to turn on cold water while the gas water heater is running?

Experts categorically do not recommend turning on cold water while the gas water heater is running. There are a number of reasons for this:

The operating instructions prohibit turning on cold and hot water at the same time. You should set the heating temperature, which will allow you to obtain comfortable water without adding cold water.
The main reason is the rapid build-up of scale in the heat exchanger.

The “winter-summer” mode will allow you to quickly change the heating temperature. This function makes using the instantaneous water heater easier.

Do I need to turn off the device at night?

First of all, this issue is relevant for users who have old-style speakers or those with piezo ignition. They have a constantly burning wick, this process increases gas consumption and poses a certain danger. Therefore, it is better to turn off such models at night. This will not only reduce the risk of an emergency, but also save money.

It is not necessary to turn off a device with automatic ignition. The instruction manual doesn't say anything about this. The automatic dispenser has several levels of protection against emergency situations. Therefore, there is no need to worry about any danger.

Any instantaneous water heater has the following sensors to ensure safety:

traction sensor – checks the presence of traction;
ionization sensor – monitors the presence of flame;
thermostat – prevents the temperature from exceeding 90°C.

If one of the sensors is triggered, the device will turn off. The presented sensors provide the necessary minimum safety for the device.

Rules for using speakers in apartments

Each Ariston model comes with an instruction manual. The instructions explain in detail the basic rules for using the device, safety standards and much more. If you follow all the manufacturer’s recommendations, the service life of the unit will be longer, and the likelihood of malfunctions and dangerous situations will be less.

Manufacturer's recommendations for use

Basic recommendations for use:

It is not allowed to place foreign objects on the surface of the device.
The device may only be cleaned and repaired when it is disconnected from all power sources (water, gas, electricity).
If foreign odors are detected coming from gas equipment, it must be immediately disconnected from the power supply.
If the combustion products controller fails, the column must not be turned on.

Only if all of the above rules are observed, the use of Ariston gas equipment will be safe.

If the device is used incorrectly and is not properly cared for, this can lead to the most unpredictable consequences, including explosions, fires and fatal poisoning. Therefore, in order to avoid troubles as a result of improper maintenance, it is best to choose a gas company and enter into a maintenance agreement with them.

Safety regulations

The main safety rules that every consumer who has installed an Ariston gas water heater in an apartment (house) should know:

If you smell gas, you should immediately stop using gas appliances and turn off the taps of all devices. After this, you must immediately call the emergency service.
It is not allowed to unauthorizedly carry out gasification of apartments, as well as disconnecting old and connecting new gas appliances.
It is prohibited to allow children of preschool age, as well as incapacitated persons, to use the speaker.
It is not permissible to use kitchens and other rooms where gas equipment is installed for sleeping and relaxing.

In gasified rooms, ventilation ducts must be constantly open, and when using gas appliances, the vents must also be opened.

We discussed more information on safety measures and operating rules for gas equipment in the next article.

Ariston geysers are one of the most reliable water heating devices in the world. In addition, they are very easy to operate and economical in fuel consumption. It is enough to understand how the device lights up to ensure comfortable and quick heating of running water for personal needs .

Mandatory precautionary orders

Any purchased equipment comes with instructions for proper operation of the gas water heater. The presentation of the action of most of them is identical to that indicated above, but then the mandatory observance of safety precautions should be highlighted as a red line.

It is necessary to carry out preventive cleaning of the gas water heater in order to avoid disruption of the efficiency of its operation (exactly how to do this, you can read in the document that comes with the gas water heater - instructions).
It is important to monitor the condition of chimney ducts - this will help to avoid blockages.
If the appliance fails, you should immediately contact the gas service. Trying to fix the problem yourself is prohibited.

Moreover, the activation of the unit is shown in detail in the video:

It is enough to somehow understand how to light the device once to ensure comfortable and instant heating of running water. And after that, you can simply enjoy the operation of this convenient heater.

How to turn on a gas water heater according to the rules - on ZdavNews.ru

Long gone are the days when all housework was done manually. Household techniques have become our reliable assistant in housekeeping. Tireless electric “workers” help cook food, wash clothes, wash dishes, restore order and cleanliness, making our lives cruelly easier

However, in order for homework to proceed smoothly and without any interruptions, it is important to select the right devices, paying attention to capacity, speed, functionality, number of modes and other performance characteristics. How to avoid common mistakes when purchasing this or that equipment, how to use it correctly, which models are considered the best, clearly find the cause of the breakdown and repair the device yourself. Comprehensive news is presented about all types of equipment: both small and large, both budget and expensive, both domestic and foreign. Read useful articles and replenish your personal knowledge about household appliances with new valuable information!

Read useful articles and replenish your personal knowledge about household appliances with new valuable information!

Share the link and your bros will know that you know the answers to all questions. (pre)great ツ

Model	Water flow (l/min)			Minimum water pressure (bar)	Power, kWt)	Ignition system	Water temperature control
Model	10	11	14	Minimum water pressure (bar)	Power, kWt)	Ignition system	Water temperature control
FAST EVO C 11 / 14	✔	✔	0,1	21,5 / 27	from the network	electronic burner modulation
FAST EVO B 11 / 14	✔	✔		21,5 / 27	from batteries	electronic burner modulation
FAST R 10 / 14	✔	✔		20 / 27	from batteries	mechanical burner modulation
NEXT EVO SFT 11 NG EXP	✔	19,58		from the network	electronic burner modulation
MARCO POLO M2 10l FF	✔	0,2	20	from the network	3-speed