Cast iron sauna stove “Sibir-18” with cast iron combustion door (NMK) 12 - 18 m3

Rating of the TOP 10 best cast iron stoves for baths in 2020

What is the secret to the success of Teplodar stoves?

Many bath attendants are captivated by exhibitions when it comes to purchasing Teplodar stoves for their own baths: according to reviews, it is from the representatives of this company that you can always get a comprehensive answer as to why this is so and not so, and why this model is more expensive than a similar one. After all, it is usually quite difficult to get a more or less clear answer from sellers of other companies, and the good knowledge and reasoning of those selling Teplodar to some extent induces trust.

Teplodar bathhouse stoves are also so popular among bathhouse attendants because they warm up the room record-breakingly quickly - and this is just right for bathhouses that are used seasonally and sporadically.

How to choose and what to pay attention to?

When choosing a model, you should think about it at the construction stage, then there will be no difficulties when installing some options. However, installation can be carried out after the completion of capital construction.

Experts recommend paying attention to the following characteristics when purchasing::

• Design – with a remote firebox, there will be a need for a window between the steam room and the dressing room.
• Power - the most optimal calculation is 1 kW per 1 cubic meter. steam rooms
• Convection – forced convection speeds up the distribution of heat.
• The type of heater - it determines how the steam will be, wet or dry.
• The volume and mesh of the heater directly affects the power and speed of heating, as well as the size of the stones used.

Teplodar Siberia-20 LK

• Cash

• Pickup: today (addresses)

The modification of the Siberia 20LK stove is designed for medium-sized steam rooms. The stove has large heating surfaces, thanks to which the steam room warms up very quickly. The firebox of the Siberia stove is very powerful and efficient. The stones in the heater basket are heated from five sides and produce a lot of light steam. The stove's chimney outlet is classic - shifted to the front edge of the stove. This arrangement of the chimney provides maximum access to the heater.

L - the furnace firebox is made of high-alloy steel with a chromium content of up to 13%. Thermally loaded elements of sauna stoves are made of steel with a chromium content of 17%. The convector casing of the furnace is painted with silicone heat-resistant enamel. K - combined furnace convector casing - it combines elements painted with silicone heat-resistant enamel and elements made of mirror stainless steel.

• Instructions (1 MB)
• Certificate of Conformity (221 KB)

The best cast iron stoves for a wood-burning sauna

Vesuvius LEGEND FORGING 16 (205)

A small cast iron stove with a 120 kg volumetric heater provides high-quality heating of the steam room thanks to free air convection between the stones.

A closed combustion chamber with an afterburning function and thick ones are the key to safety and economical fuel consumption.

The thickness of the walls also ensures good heat transfer on one firebox without the need to constantly add fuel.

The standard top connection to the chimney is suitable for most types of baths.

The spacious combustion tunnel allows the use of firewood up to 25 cm long.

The glass door and spacious ash pit allow you to clean the stove from ash and soot less often, even when using resinous wood species.

Specifications:

• Heated room volume: 18 cubic meters;
• Power: 16 kW;
• Type: closed;
• Connection: top, 12 cm;
• Combustion tunnel: 250 mm.

pros

• structural strength;
• fast heat transfer;
• thick walls
• ease of care;
• large heater;
• economical fuel consumption.

Minuses

• weight.

Vesuvius LEGEND FORGING 16 (217)

A small stove from a Russian manufacturer, made of high quality cast iron . The power of the device is enough for fairly large steam rooms with a volume of up to 18 cubic meters.

Small dimensions and top chimney connection make the model optimal for use in most bathhouses.

A spacious heater, allowing you to place up to 120 kg of stones, and elaborate walls improve convection and heat distribution throughout the room, speeding up heating.

The ash box is spacious and does not require frequent emptying.

The firebox accommodates fuel up to 25 cm long, and the soot-resistant glass allows you to use tarry and wet firewood without the risk of smoking.

Specifications:

• Heated room volume: 18 cubic meters;
• Power: 16 kW;
• Type: closed;
• Connection: top, 12 cm;
• Combustion tunnel: 250 mm.

pros

• structural strength;
• good convection;
• ease of care;
• volumetric heater;
• economical fuel consumption.

Minuses

• weight;
• On some models the coating burns out quickly.

Vesuvius Legend Standard 16 (DT-4)

The stove of a famous Russian brand is popular due to its high-quality assembly and materials, spacious firebox, relatively small size and acceptable power..

The secondary combustion function ensures long-term combustion of one firebox and reduces emissions of harmful substances into the atmosphere.

The heater can hold up to 120 kg of stones.

The spacious podzolnik is easy to clean and does not require cleaning every time after firing the stove, and the glass self-cleaning system will not allow it to become sooted with combustion products of even resinous wood.

The standard top connection allows you to place the stove in almost any bathhouse.

Specifications:

• Heated room volume: 8 cubic meters;
• Power: 16 kW;
• Type: closed;
• Connection: top, 12 cm;
• Combustion tunnel: 250 mm.

pros

• spacious heater;
• fast heat transfer;
• ease of care;
• stylish design;
• fuel efficiency.

Minuses

• requires the application of a protective coating.

NMK Sibir-18

A floor-standing stove with a remote firebox and a volumetric heater allows you to quickly heat steam rooms with a volume of up to 18 cubic meters.

The heater holds an almost record 180 kg of stones in small dimensions.

The dimensions and design allow the stove to be placed even in small bath buildings, however, the firebox requires a separate room, which creates installation difficulties and is not always convenient from an operational point of view.

The ash pan is small and requires emptying if possible after each fire. The combustion tunnel accommodates firewood up to 20 cm long, which may also not always be convenient.

The door does not have glass, so you need to monitor fuel burnout by opening it.

Specifications:

• Heated room volume: 18 cubic meters;
• Power: 16 kW;
• Type: closed;
• Connection: top, 10.5 cm;
• Combustion tunnel: 200 mm.

pros

• very large heater;
• high warm-up speed;
• low price.

Minuses

• remote firebox;
• there is no glass in the door.

Vesuvius LEGEND FORGING 22 (270)

One of the most powerful models in the manufacturer’s line, capable of heating large steam rooms with a volume of up to 24 cubic meters.

High power is ensured by thick walls, a volumetric heater that can hold up to 180 kg of stones, and high-quality material that maintains a high level of heat transfer.

A remote firebox requires a separate exit to the dressing room, which can create difficulties in installation and operation.

The voluminous ash pan does not require frequent emptying, and the glass in the door is protected from the formation of soot, which makes cleaning the stove easier.

The combustion tunnel accommodates fairly long firewood up to 25 cm, which increases their combustion time and reduces the need for regular heating.

Specifications:

• Heated room volume: 24 cubic meters;
• Power: 20 kW;
• Type: closed;
• Connection: top, 12 cm;
• Combustion tunnel: 250 mm.

pros

• volumetric heater;
• spacious firebox;
• easy to clean;
• power;
• heated volume.

Minuses

• remote firebox;
• weight.

Vesuvius HURRICANE STANDARD 16 (DT-4S)

The compact model with a high heater is optimal for small steam rooms . The heater holds up to 120 kg of stones, which ensures the fastest heating of the room due to rapid convection, and the thick walls of the firebox maintain the required temperature for a long time.

An overhead chimney with a standard diameter is suitable for most types of buildings.

A long combustion tunnel and a spacious ash drawer make it easier to fire and maintain the stove..

The firebox is remote and requires access to a separate room, which is not always convenient from a design and installation point of view.

The door glass is protected from soot, which allows the use of resinous and wet firewood.

Specifications:

• Heated room volume: 18 cubic meters;
• Power: 18 kW;
• Type: closed;
• Connection: top, 12 cm;
• Combustion tunnel: 250 mm.

pros

• durable glass;
• ease of care;
• spacious heater;
• convection power and speed.

Minuses

• installation difficulties.

Vesuvius RUSICH ANTHRACITE 22 (DT-4) 2016

Stylish and high-quality model, manufactured taking into account all safety systems and European quality standards.

A closed furnace with secondary combustion ensures efficient combustion of fuel, and well-designed walls ensure proper and rapid heat transfer.

Small dimensions allow the stove to be placed in any bathhouse, however, the design features include a firebox from the adjacent room, which creates difficulties during installation and is not always convenient from a technical point of view.

A spacious ash tray and self-cleaning glass make cleaning the stove easy. The heater, however, is not the largest; it holds only 40 kg of stones.

Specifications:

• Heated room volume: 14 cubic meters;
• Power: 16 kW;
• Type: closed;
• Connection: top, 11.5 cm;
• Combustion tunnel: 200 mm.

pros

• structural strength;
• fast heat transfer;
• ease of care;
• original appearance;
• efficiency.

Minuses

• small heater;
• installation difficulties.

Ermak 20 Standard mesh

A floor-standing stove equipped with an upper chimney, with good power and a high heater, allows you to quickly heat steam rooms with a volume of up to 20 cubic meters.

The model has a minimalist modern design, but there is no glass in the door, which makes it impossible to monitor the amount of burned fuel without opening it.

The ash pan is somewhat small for the combustion tunnel, so it requires regular cleaning.

The heater mesh has large gaps and requires stones of a certain caliber. The firebox is remote, which is also not always convenient to use and install.

Specifications:

• Heated room volume: 20 cubic meters;
• Power: 22 kW;
• Type: closed;
• Connection: top, 11.5 cm;
• Combustion tunnel: 200 mm.

pros

• minimalistic design;
• high heater;
• safety;
• secondary afterburning;
• economical fuel consumption.

Minuses

• no glass in the door;
• remote firebox;
• small podzolnik.

TMF Tunguska Cast Vitra

Budget model with stable demand in the market . Despite its modest capabilities, it is optimal for small steam rooms.

A remote firebox with panoramic glass will allow you to carefully control the process of burning fuel, which can be used as firewood or coal briquettes.

The heater holds up to 55 kg of stones, convection is only top, despite the convection casing, which somewhat reduces the power and heating speed and increases the cooling speed.

The combustion chamber is very spacious - it can hold up to 60 liters of fuel. The small ash pan is located deep, making it difficult to clean.

Specifications:

• Heated room volume: 18 cubic meters;
• Power: 16 kW;
• Type: closed;
• Connection: top, 11.5 cm;
• Combustion tunnel: 200 mm.

pros

• spacious firebox;
• low price;
• convector casing;
• panoramic glass firebox.

Minuses

• The ash pan is located deep;
• cools down quickly.

KASTOR Karhu-16 JK

Finnish-made furnace made of high-strength alloy cast iron, which ensures the durability of the equipment.

It warms up the room quickly and efficiently and maintains a high temperature on one firebox for a long time.

It features a modern stylish minimalist design and small size.

High performance is ensured by materials and wall thicknesses that support the required level of heat transfer.

The podzolnik is spacious and does not require cleaning after each fire.

The heater is small and can hold up to 40 kg of stones, but this is compensated by its design features, materials and wall thickness.

Specifications:

• Heated room volume: 16 cubic meters;
• Power: 15 kW;
• Type: closed;
• Connection: top, 10.4 cm;
• Combustion tunnel: 200 mm.

pros

• reliability of design;
• quality materials;
• power;
• design;
• easy to clean.

Minuses

• small heater;
• high price.

Luxurious model range "Teplodar" - everything for soul and body

In total, the model range of bath stoves produced by Teplodar includes eight basic models in more than fifty modifications in design, power and style.

"Rus" - the favorite of bathhouse attendants

“Rus” is especially popular among Teplodar stoves - this heater received such a proud name due to the fact that it perfectly maintains the balance of temperature and air humidity - exactly the way a truly Russian person loves it. And the design of “Rus” is also pleasing: a firebox made of chrome steel, a combined casing-convector made of mirror steel, a built-in high-speed steam generator and a 33-liter water tank. Moreover, the steam generator is not simple - it itself gives additional rigidity to the structure and has a water supply dispenser and allows you to experiment with the microclimate. The stove itself is stylish, strong and durable.

What else is good about “Rus” is its huge heater with convection ventilation, a minimally loaded chimney manifold and a self-cooling door. “Rus-Panorama” has been even more improved - in it all the efficiency is concentrated on heating the stones and air, which makes it possible to create the climate of a soft and healing Russian bath.

"Vertical" - compact and neat

According to reviews, the Teplodar “Vertical” stove looks very, very worthy: excellent quality metal, no welds, everything is done carefully and conscientiously. The lines are smooth and clear, and the assembly itself is professional. And, interestingly, in this oven you can also change the tiles.

“Vertical” produces noticeable heat in half an hour, and can burn for up to 8 hours when smoldering. The only drawbacks are light smoke when opening the door, a window that smokes quickly and the fact that the wood usually does not burn out completely. Flue gases are also not burned. But such a stove can safely be called an “economy option,” and it doesn’t take up much space in the steam room.

And the installation of the “Vertical” stove from the Teplodar company is very simple and easy - it doesn’t even need a foundation. Despite the power, it will not emit strong infrared heat. And “Vertical” consumes very little firewood, which is good news.

"Sahara" - with a steam generator!

Teplodar “Sahara” sauna stoves are also unique - their developers managed to put into practice the so-called “Golden Section” system. So if you have long dreamed of doing everything in the bathhouse according to Feng Shui, you can start with just this stove! The body has no sharp corners, and the design itself is made according to the “Living Nature” principle. And for those who are only interested in the technical side, you will be pleased to know that only “Sahara” has a two-chamber heater, in which stones are heated from five sides at once. This stove also provides the possibility of installing a multi-section steam generator, which creates well-heated “light” steam within 20 minutes after lighting the stove. Moreover, “wet” and “dry” steam can be combined.

For reference: the steam generator produces a slightly different steam than water on hot stones: it is of a completely different quality, because in the steam generator its temperature reaches 500˚C, and the liquid, once in it, is instantly transformed into finely dispersed and very light steam. By the way, a built-in steam generator for a stove today is still a rarity even for the Russian market.

“Siberian Cliff” and “Siberia Panorama”: unusual design

The Sibirsky Utes stove is also attractive for its design, with a mesh, high efficiency and excellent heating dynamics. In an hour, it heats up the steam room to a fairly high temperature - and all thanks to the fact that its convection areas are increased compared to other analogues. But they are no longer designed to create a good microclimate in a Russian bath, but rather a classic Finnish sauna - with its air temperature of 100-140˚C and humidity up to 30%. Although today some modifications of the “Sibirsky Utes” are sold, in which a heat exchanger is built in for heating water.

The main advantage of the “Siberian Cliff” is that, due to its design, the upper part of the stones is heated much better than other stoves. This stove is also famous for its excellent convection: between the stones and the wall of the firebox there is an empty space, which is fenced with a fine-mesh mesh - so it distills the air in a special way.

But “Siberia-Panorama” is additionally equipped with a special fuel channel with a large screen-door and a heat-resistant magnet, which create the effect of a real fireplace. By the way, this stove has a record dynamics of air heating: in 40 minutes it can heat the steam room to 100˚C!

And, finally, Teplodar’s fireplaces are wall-mounted and corner, with particularly high aesthetic qualities and excellent heat transfer. For a relaxation room, they are perfect if the steam room is, for example, infrared.

Types of cast iron stoves for baths

Experts identify several classifications of cast iron stoves:

• By type of fuel used - wood, coal, combined.
• By design - with a remote firebox, with a built-in firebox.
• By type of heater - with an open or closed heater. Opening the heater produces dry steam, closed heaters produce wet steam.
• According to the presence of a water tank - with or without a tank. Stoves with a tank are very practical; there are both mounted or mounted, as well as built-in options.