Standard sizes of ceramic tiles (tiles)

What is the thickness of ceramic tiles?

The thickness of ceramic tiles is an important parameter that should be taken into account when choosing material for cladding.
The thickness of the product affects not only the technical characteristics, but also the visual perception. The durability of the material for cladding, and accordingly the wall cladding itself, also depends on the thickness. Thinner tiles are more susceptible to cracking and other destructive influences.

The thickness of ceramic wall tiles is usually less than that of floor tiles. For wall cladding, options with thicknesses ranging from four to nine millimeters are used. The option with a thickness of 7 mm is considered universal, since as the thickness of the product increases, the weight and consumption of glue during installation increases, as well as the cost set by the manufacturer.

What should be the thickness of wall tiles in a bathroom?

The choice of the thickness of the cladding layer for the walls in the bathroom is made based on the size of the room itself, which directly affects the choice of cladding materials. It is not recommended to use tiles with a thickness of more than 8 millimeters, but also less than 3 mm. It is worth remembering that as the thickness of the product increases, not only its strength increases, but also its cost.

Thickness for floor

Ceramic floor tiles are usually much thicker than wall tiles.
This is due to the fact that the tiles on the floor take up a large load, and therefore require certain strength qualities, which are determined, among other things, by the thickness of the product. Common average values include a range from 6 to 12 millimeters of thickness. However, variations of products with thicknesses from three to twenty-five millimeters are known. On sale, as a rule, it is difficult to find options thicker than 12 mm in thickness, but for ordinary apartment and house needs, more is not required.

Tile sizes

Thick tiles are more durable, but also heavier.
The thickness of the tile largely depends on the type of coating and what surface it will be used for, so this factor is extremely important when choosing a material.

Laying tiles is not particularly difficult, the main thing is to understand the technology of the process.

An important factor in such work is the thickness of the material. It is this that influences the strength and service life of the coating. Products from different manufacturers may have different sizes.

The most common solution is tiles. The maximum thickness of the finish can reach 250 mm, but it is quite rare and is used only for floor cladding in industrial buildings.

Construction experts say that the greater the thickness, the higher the strength of the material. Specimens that are too thin can be easily damaged. However, the size of the coverage also affects its cost.

Before tiling the walls, it is recommended to carefully examine the packaging of the material. Often, manufacturers indicate on it the optimal thickness and type of adhesive solution that is best suited for installation.

If you follow all the recommendations, you will get an attractive tile covering of high quality and protection from mechanical damage. In the following table you can see the sizes and characteristics of different types of tiles.

Optimal thickness of wall tiles

If the tiles are heavy, it is necessary to choose the most durable types of adhesive.
The thickness of the tiles for the walls is much less than for the floor. This parameter can vary from 4 to 10 mm. In this case, the cladding will have a high level of strength.

When using a heavier coating, it will be much more difficult to lay it, and the weight of the cladding will also increase.

You will also need a lot more tile adhesive and there is no guarantee that the material will last long enough.

For walls, the thickness of the adhesive when laying tiles can vary from 3 to 5 mm. This parameter depends on the number of defects on the surface and the weight of the finish itself. Heavier coverings require more adhesive on the wall.

Laying tiles with your own hands

As a rule, the amount of work involved in tiling the kitchen walls is small, and the actions themselves are not particularly difficult and are accessible to almost everyone. By doing the work yourself, you can save on hired labor and, accordingly, afford expensive Italian or Spanish ceramics.

When choosing tiles for the kitchen, you should be especially careful, since not all tiles will be combined with the configuration of the kitchen cutting table and wall cabinets

However, before laying 10x10 tiles, you need to perform a number of preliminary steps:

It is necessary to decide on the design of the kitchen, the location and quantity of kitchen furniture in order to make the most of the functions of all elements. It is necessary to decide whether the kitchen will be a place for eating or just a place for preparation.
Carefully select and select furniture, calculate the dimensions, and accurately note the height at which it will be hung. It should be remembered that the chosen kitchen interior will exist for many years.
Select the type of tile, calculate the size and quantity. You need to take a reserve of 10-15%, taking into account breakdowns; the remainder can then be returned to the store or left for partial repair of damaged areas.
After this, carefully outline the area of the apron, making sure that its boundaries are exactly horizontal.
The wall under the tiles must be perfectly leveled, plastered and treated with grout.

You can tile your kitchen splashback yourself

If the interior partition is made of wood (which happens in houses built in the 1960s), then it is recommended to break it, replacing it with cinder block, or cover it with gypsum fiber board wall panels without demolition.

Ceramic tiles 10x10 are laid with a special adhesive, which allows them to be rubbed into the wall for some time after installation. The adhesive layer applied to the back of the tile is leveled with a special notched trowel. The coating is laid layer by layer, from bottom to top, the seams are marked with special crosses.

After the glue has dried, the joints are treated with a grout mixture, and the tiled wall itself is washed and wiped with a dry cloth.

More is not better

When choosing a finishing material, there is a great temptation to buy a larger size: they say, less needs to be glued, less hassle. However, keep in mind that the larger the element, the heavier it is, which means there is a high risk that the coating will “float” when gluing. Therefore, for wall tiles there is a thickness limit - from 4 to 9 mm. Accordingly, the thicker the tile, the smaller its area.

How to decorate the walls in the kitchen

What is the best way to decorate the walls in the kitchen? The first answer that comes to mind: ceramic tiles. The option is really worthy: traditional, unpretentious in everyday life, varied in terms of design. But not just tiles. Let's talk about other options for finishing kitchen walls that will “survive” in conditions of high temperatures and humidity.

Another nuance should be taken into account when gluing: the thickness of the adhesive layer. Beginners often believe that the more glue there is, the better it will stick. However, this leads to the fact that the adhesive does not adhere well and the tiles slide off, despite the “crosses”. This is especially offensive when laying out mosaics or complex figures. The optimal amount of solution is from 4 to 8 mm, depending on the size and weight of the panels.

How many pieces of tiles are there in a square meter?

Ceramic tiles can vary in size.

In order to calculate the number (in pieces) of tiles of one size or another per square meter, you need to calculate the area (quadrature) of one tile and then divide the square meter by the area of one tile.

Here is an example, 20x30 tiles.

Area is length times width.

It’s more convenient (to avoid confusion in the future) to immediately convert centimeters to meters.

20 cm = 0.2 meters, 30 cm = 0.3 meters.

We multiply 0.2 x 03 = 0.06 meters - this is the area of one tile.

Divide 1. 0.06 = 16.6 (with a tail, can be rounded to 16.7).

As a result, we get the required number of tiles measuring 20 x 30, 16.7 pieces in one square meter.

Using the same principle, the quantity of any size tile is calculated.

And more information from personal experience, on the container (box)

There is information both in square meters and in the number of pieces in a box, as a rule, one package contains more than one square meter (1.2, 1.5, etc.).

Tiles are almost never counted in pieces (the frieze or decor is counted by piece), but tiles are counted in square meters.

the moderator chose this answer as the best

To order tiles, it is enough to know how many square meters of surface you will cover. It is necessary to understand that it is quite simple to abstractly calculate the number of tiles per m2, but in reality, in order to lay a specific m2 of tiles, more than the calculated value may be required.

There is no need to find the area of 1 piece, then how many pieces will be in 1 m2 and, finally, in the quadrature you propose. It is enough to simply divide the quadrature you declared into length (in meters) and width (in meters):

3/0.3/0.3=33.33 pieces of tiles measuring 30x30.

2/0.4/0.2=25 pieces of tiles size 40x20.

But, this is if you just lay out the tiles on a flat surface. When carrying out actual tile repairs, more may be required because the proportions between the size of the tile and the size of the room are not respected. If you divide the length of the wall by the length of the tiles (taking into account joints and corner joints), you will not get a whole number, which means that the tiles will need to be cut. So, a margin of up to 15% will not be superfluous.

I must say right away that the calculation is very simple (from the initial geometry course).

You need to know the size of the tile. By multiplying the height by the width, you get its area.

At the same time, convert (to avoid confusion) centimeters into meters (divide by 100).

In your case, the area is 1 piece. tiles will be:

in the first case - 30x30 cm or 0.3x0.3 = 0.09 m2;
in the second case - 40x20 cm or 0.4x0.2 = 0.08 m2.

Now all you have to do is find out how many pieces of tiles are in 1 m2. To do this, simply divide 1 m2 by the area of 1 piece. tiles of each size, which will be:

And multiply by the area of the laid surface:

What sizes are ceramic floor tiles?

When considering the size of ceramic tiles for floors, it should be borne in mind that the choice is made based on certain criteria, for example, the size of the room. The most universal option is a ceramic floor covering with dimensions of 20 by 20 centimeters in each piece. Among other configurations, the following options in centimeters can be noted:

10x10;
10x20;
15x15;
30x30.

There is a pattern that the smaller the dimensions of the tile, the greater its resistance to fractures.

For kitchen

Covering kitchen walls with ceramic tiles is a budget-friendly and reliable option to add comfort and coziness to the room without losing its aesthetic qualities. Traditionally, small tiles are used for the kitchen, especially if the room itself is not large. The recommended thickness is 5 mm; you should also ensure that the surface of the product is covered with a protective layer of enamel, which will protect the lining from all kinds of kitchen contaminants.

For bathroom

In the case of a bathroom, the dimensions of the tiles play a big role. The choice of tile sizes is carried out, first of all, based on the size of the room itself.

Ceramic cladding for a bathroom should match the area of the room. If this is a small room, then the cladding should be made of small fragments to create a visual feeling that the room itself is larger. Accordingly, the larger the area of the room, the larger the size of the cladding particles used.

Rectangular ceramic tiles with a format of 20x25 centimeters, as well as 20x40 and 20x60, are often used in bathrooms. By orientation, they can be located both vertically and horizontally.

Ceramic floor tiles

When choosing a floor covering material, you should choose it taking into account some nuances. The tile must have high strength indicators. Most often, strength directly depends on thickness. When purchasing finishing material for the floor, you must also take into account the thickness of the ceramic tiles with adhesive.

The thickness of the finishing material, which has dimensions of 40x40, 30x30 and 600x600, can range from 4 to 10 millimeters. It follows that the larger the tile, the greater the thickness and vice versa. It is also worth considering that thick ceramic cladding material will cost the buyer significantly more.

To calculate the thickness of ceramic tiles with glue, you just need to read the data on its packaging, where all these parameters are indicated. A millimeter is the main measurement of the adhesive to be applied, which is indicated on the packaging.

That is, you don’t really need to count on anything. But if you still want to do this, then you should consider the following:

If the base is perfectly smooth and there are no irregularities on it, then the thickness of the glue will be 4 mm.
For large tile sizes (600x600), 7 mm of adhesive base is added.
If the base for the facing material has defects, then up to 9 mm of glue should be used.

Ceramic floor covering material has a wide range of shapes and sizes:

Square tiles: 30x30 cm, 25x25 cm, 20x20 cm, 15x15 cm, 10x10 cm, 48x48 mm.
Rectangular material: 400x300, 300x200, 300x150, 200x150, 200x100 mm.
Triangular: 98x139, 83x118, 68x97, 58x83 mm.
With four edges: 100x230, 85x196, 75x173 mm.
With five edges: 200x115, 170x98, 150x86.5 mm.
With six sides: 200 x230, 170 x196, 150 x173 mm.
With eight sides: 200x70x100, 170x60x85 mm.

The thickness of ceramic floor tiles with adhesive should not exceed 30 mm. Therefore, if the floor is not even and smooth, then it is better to bring these parameters to acceptable levels, otherwise it will have negative consequences and such tiles will not last long. That is, money and time will be wasted. It is impossible to glue on a previously unprepared surface.

Experience shows that even specialists cannot always distribute the glue correctly and maintain the ideal parameters of its thickness. Therefore, you won’t be able to accurately guess the thickness of the glue and there’s no point in getting upset here.

Manufacturers most often try to glaze tiles for floor finishing materials. In this case, the quality of ceramic granite is greatly reduced.

How to choose?

The choice of material depends on a number of factors.

Let's list the main ones:

The material for wall cladding is also not intended for floors, just as floor tiles are not suitable for walls: failure to comply with this criterion will complicate installation and reduce the durability of the coating.
Raw materials are purchased by making a preliminary calculation, adding several pieces to the resulting number of fragments (defects cannot be ruled out during the work process).
Color matters: it should fit into the overall picture of the room without interrupting the main background of the interior.

When choosing a design, take into account the size and theme: a small print against the general background creates ripples (checks, stripes, matting are better replaced with abstract patterns).
Laying the surface in a single color is good for the floor; for walls, an accent is needed: it is worth buying a companion with a pattern for the material.
If possible, it is necessary to perform calibration before purchasing: if the thickness and perfection of the corners leave much to be desired, this material is not suitable for the job (the surface of the finished canvas may differ in level).

Each type of raw material has its own classification, which is indicated on the packaging. Try to choose a product with a red mark: these tiles are durable and practical.
It makes sense to choose practical material: priority is given to surfaces with an interesting texture and pattern. This is not necessarily a motley pattern: an imitation of texture (stone, brick, wood, parquet) looks better.
Avoid complex patterns: they tire your eyes. To evaluate the perception of the material, while in the store, put several tiles together and step away: you will see the advisability of purchasing this variety.
Buy material with glaze. It adds strength to the coating and extends the life of the material.

Optimal sizes for different rooms - how to choose

Rooms intended for finishing can have very different dimensions, which should be taken into account when choosing the size and shape of the tiles. Properly selected tiles can visually change the space. With its help, you can expand the room, “stretch” the height of the walls, and designate individual zones using wall borders. To visually raise the ceiling, you can lay tiles measuring 20x30 cm vertically.

You should not choose large tiles with a size of 50x50 for a small room. The only exception is a visually monolithic porcelain stoneware coating with invisible seams. Therefore, it is better to look in catalogs for popular small-sized products or mosaics.

For bathroom and toilet

When choosing cladding for your bathroom, we recommend following these tips:

For walls, choose a standard glossy finish, and for floors, matte;
Place darker material on the floor and lower half of the walls. It is better to decorate the upper part of the walls and ceiling with light wall and ceiling tiles;
the bathroom or shower area should be highlighted in a color contrasting with the main tone;
tiles with large convex reliefs are best used as decorative fragments.

Uneven edges will be difficult to join in the corners.

Large tiles on the walls in the bathroom do not look impressive. It is inappropriate here, it will have to be divided, and besides, due to its large format, problems may arise with installing plumbing hatches under the tiles. It is better to use dimensional products for finishing the floor, and suitable sizes for walls are 45x20, 50x20, 50x25, 60x30. The cladding looks aesthetically pleasing when there are no more than 6 fragments along one wall. Based on this advice, you can choose products of suitable width.

For kitchen

When decorating a kitchen, not only the shape, color, texture, but also the size of the tiles are of particular importance. It can be different - from mosaic squares of 1x1 cm to impressive slabs of 60x60 cm. The walls are most often lined with glazed square elements, which visually expand the space thanks to the glossy surface, with a side of 15 cm. Options with dimensions of 30x30 and 40x40 and 20x30, 30x40 are also common. Large tiles are not the best option for walls, since they are quite difficult to install. It is better to cover the floor with large slabs. This will speed up the installation process and minimize the number of seams.

For the floor, slabs with parameters 30x30, 40x40, 50x50 or 60x60 are suitable. If you plan to use a mosaic, choose one that is glued to square polyurethane or paper backings.

You can stick artificial stone bricks with dimensions of 9x15 cm or tiles with various patterns of 10x10 cm or even smaller on the walls. Such products will help highlight a fragment of the wall and create an atmosphere of antiquity.

Porcelain stoneware slabs are more than appropriate in the kitchen - glazed for the walls, matte for the floor. The most popular products are with dimensions 30x30. The remaining options - from the smallest - 5x5, to 100x100 and 120x180 cm, are also in great demand.

For the hallway

The dimensions of the slabs influence the design of the hallway. If the size is poorly chosen, even the most spectacular tile will not look presentable. For a small space it is better to choose small and medium modules because they:

look organic;
easier to install;
will require less pruning.

Pros of large tiles:

For a large room, large-format tiles are the best option. Installation is much faster. Large plates help maintain surface level and minimize the number of seams. Debris often gets clogged in the spaces between the tiles, causing mold and bacteria to form.
Also, in large halls, a composite panel of tiles in the form of a carpet will look very colorful.
Mosaics should not be used on the floor - they are more suitable for wall decoration. It is better to choose square and rectangular slab options. Octagonal tiles with eye-catching gold or silver accents will look great.

Types and sizes

Just recently, during the Soviet era, bathroom tiles had standard dimensions of 20x20. However, modern requirements make it possible to significantly expand the parameters for ceramic products. Even new apartments offer a variety of layouts that require individual boundaries. Kinds:

mosaic;
small 6x6 cm;
average 20x20 cm;
large 25x40 cm.

Mosaic products

This option is usually made of glass, marble or tile. Usually the predominant dimensions are from 1x1 to 5x5 cm, they are considered standard. Such products are highly recommended for use in the bathroom or in combination with other tiles of excellent sizes and shapes. The laid out panel will look harmonious on the floor, wall or ceiling. In addition, mosaics can be used to decorate individual fragments of decor or to play in contrast with the overall pattern.

Mosaic in the bathroom

Small

For a limited space, which in most cases is a bathroom, ceramic products of small sizes from 6x6 cm to 20x20 cm are an excellent way out of this situation. Due to its appearance and small dimensions, it is able to give the desired effect to the entire space. Typically, small tiles are square elements of 10x10 cm, used for finishing the floor. They can be placed in different orders, for example, diagonally or alternated with other materials.

Small

Rectangular products are more like small bricks, which makes them suitable raw materials for installing wall coverings. The overall pattern, in this case, will resemble a decorative border, separating or separating the various segments of the finish. Thus, you can select a toilet area with a shared bathroom or a separate place for a washbasin. Such a strip often differs in color, texture or other parameters.

Optimal size of notched trowel

Notched trowels are commonly used for laying ceramic tiles. Thanks to this tool, the glue is applied in waves, so the excess does not protrude beyond the boundaries of the tile area.

To achieve this result, the spatula must be selected according to size. Ideally, the width of the tool should be equal to the sides of the tile, or slightly greater. It remains to determine the size of the comb teeth. For tiles of any shape other than square, you can use the following diagram:

Tile area 50-100 cm2 – tooth size 4 mm.

Area 100-400 cm2 – size 6 mm.

Area 400-900 cm2 – size 8 mm.

Area 900-2,500 cm2 – size 10 mm.

For uneven bases and floor coverings, the size of the teeth may vary larger.

Side size of a square tile (when using rectangular tiles, the calculation is based on the area - see above)

Recommended spatula tooth size

To properly lay ceramics, you must follow the following technological process:

Work always starts from the far corner and is carried out towards the door.

To simplify the process, it is recommended to install beacons and make markings.

In uneven corners, tiles can be laid through a special plastic corner, which partially compensates for surface errors.

At the final stage, the base row is laid out, which levels out all the unevenness.

After laying the tiles, the gaps are filled with grout mixture.

Dimensions of wall tiles

When installing vinyl wall tiles, the use of connector moldings is not required. In addition, thanks to the laying of such facing material, easy access to technical communications is maintained. The surface of the material is non-slip compared to ceramic.

Among the advantages of PVC panels and slabs are noted:

moisture resistance;
when laid correctly on the walls, it is visually difficult to distinguish from ceramic;
cheap material;
can be marble, wood or stone in color;
PVC is an environmentally friendly material;
The laid white PVC tiles on the ceiling look good and do not allow moisture to pass through.

PVC ceiling, wall or floor tiles must be laid on the sheathing. In the bathroom, each wall will become smaller by approximately 4 cm. This should be taken into account by owners of small bathrooms.

Tiles 15 x 15 cm - the best choice for the bathroom

The standard for wall cladding is ceramic products. You can use mosaics, small tiles from 2.5x2.5 cm, 33x33 cm and larger. For a large bathroom you can choose absolutely any tile, but for a small one it is better to use a small one.

It is worth noting that ceramic products are the standard for finishing walls, floors and ceilings. Most often, white or any light color is laid on the ceiling and walls, and dark on the floor. You can decorate the wall with slabs with a pattern or pattern. Finishing material of marble, wood or stone color can be laid on the floor and walls; these slabs imitate the texture of natural materials. Only, unlike a marble slab, a ceramic one is lighter and cheaper.

Tiles 10 x 10 different colors

Tiles with dimensions of 15x25 cm, 20x25 cm are suitable for small bathrooms. Khrushchev's houses usually have small bathrooms. Floor tiles can be larger in size, however, it is better to choose them in proportion to the wall tiles.

For larger bathrooms, ceramic finishing materials measuring 33x45 or 30x60 cm are used. These are the most common dimensions of ceramic slabs.

Optimal thickness of tiles for walls and floors

Before we talk about the thickness of the tiles, let us remember that finishing materials for cladding walls and floors in a room are divided into two large groups:

Ceramic tile;
Porcelain tiles.

Tiles are more often used for wall cladding. Porcelain tiles, due to their high strength, which brings them closer to stone, are used to cover floors.

Since the general technology for the production of tiles and porcelain stoneware is the same for all manufacturers, we can talk about the optimal or common thickness of these materials. The thickness of the tiles on the wall is 7-8 mm, the thickness of porcelain stoneware is 10-11 mm. The minimum thickness of floor tiles is 8 mm.

Note: Small tiles with a thickness of 3-4-5 mm are available on sale. It requires very good preparation of the walls and very careful installation, so it is not popular among professionals.

The specified thicknesses are optimal for production, packaging, transportation and installation. However, you need to understand that the larger the size of the tile, the greater the thickness it can have.

For example, Kerama Marazzi tiles, TRIANON collection, for walls measuring 750x250 mm, have a thickness of 9 mm. The same collection for the floor has dimensions of 502x502 mm with a thickness of 9.5 mm.

With an increase in the thickness of the tiles and their sizes, the laying technology and the choice of tile adhesive change somewhat. This is especially true for walls, as there is a creeping effect.

It is worth noting that porcelain stoneware manufacturers have found a compromise between increasing the size of the tile and increasing its thickness. They produced very large porcelain stoneware, so-called slabs. Their length reaches 3 meters, while the thickness is in the range of 3.5-5.5 mm.

Related articles: Construction chemicals are an excellent assistant in modern construction

How to choose kitchen backsplash tiles

Places that are maximally splashed with water, fats, and where soot settles (working area of the wall) must be decorated with a tiled apron. This makes it easier to care for the surface and adds decorativeness to the decoration of the room.

When deciding which tile to choose for the kitchen backsplash, take into account the resistance to acids and alkalis. In the work area, detergents are most often used for cleaning. The backsplash tiles should have a dense enamel coating and minimal porosity. Look at the labeling - the highest level of resistance to aggressive chemicals is indicated by the letters AA.

There are no mechanical loads, so strength indicators are not important here

Better pay attention to the heat resistance of ceramics

It is especially important for owners of gas stoves: high-quality glazed tiles will withstand heating up to 125°

The fashionable modern trend of finishing walls with small-sized tiles has been criticized due to the large number of grout joints. This is where all the germs and kitchen dirt gather, which makes cleaning difficult.

Pay special attention to the choice of grout. To prevent it from darkening and to look neat for a long time, moisture- and dirt-repellent components and antifungal fillers are added to the material

Along with discussing how to choose kitchen tiles for a backsplash, think about the problem of untidy seams. It is solved by evenly cut (rectified) tiles, when laying the distance between the edges does not exceed 2 mm.

Types of ceramics for an apron

Popular size is 10x10. Rarely requires trimming, convenient for installation in hard-to-reach places, and easily combined with decor. The disadvantage is a lot of seams. Manufacturers imitate 10x10 tiles by offering large tiles in multiple sizes with indentations.
Brick-like ceramics. Rectangular in shape, beveled edges, usually plain. Calm colors are suggested to be diluted with decor with photo printing. Visually expands the room.
Mosaic tiles. Mosaic looks great, is tricky to install, and requires maintenance. Let's replace it with a more practical imitation, tiles with deep “mosaic” slots, which are easier to lay.
Medium format ceramics rarely end up on the backsplash. Often requires trimming and is difficult to fit into dimensions.

Apron decor

Insert tiles are common and convenient. They have dimensions that match the dimensions of the base. The choice of patterns is huge; such decor can be placed scattered or in the form of panels, in accordance with the design idea.
A panel in the form of a large tile or a picture made up of four to six small tiles.
The frieze consists of rectangular decorative tiles, laid out as a border along the perimeter of the upper, lower edges, and in the center.

Designer tips for designing a kitchen apron

Adhere to harmony; the design of the tiles for the backsplash echoes the design of the kitchen, the “appearance” of the kitchen set, and the flooring;
The white color of the tile is universal and matches almost any color. Dilute the whiteness with colored inserts, decor, mosaics;
play with contrasts between the colors of the apron and furniture;
bright, variegated colors, large patterns - for large spaces, a small kitchen will seem even cramped;
Large tiles are not suitable for a small room;
dark gloss visually narrows the space, beige, cream, sand shades expand it;
practical shades for a kitchen apron - in beige and brown tones, the least branded.

Determining quality

The performance characteristics of a good kitchen tile should be high. Choose ceramics that are resistant to dirt, abrasion, aggressive detergents, and hot steam.

In a work area decorated with an apron, the walls are always subject to heavy grease contamination, so the tiles here should be covered with an additional layer of enamel.

Pay attention to medium-priced tiles; in this segment it is possible to choose high-quality material without overpaying for a well-known brand. Do not overdo it with savings - you risk purchasing a fragile, low-quality product

Purchase facing materials in specialized stores. A variety of textures, colors, styles will satisfy every taste. Sales consultants will professionally advise which tiles to choose for the kitchen. Plus, get a guarantee of return of low-quality material.

Application of foam plastic

Repair will not be a difficult process if you choose foam boards. As a rule, light colors are chosen for the ceiling. Or shades of blue, beige. White material is cheaper, but looks noble and fits into any interior. It is not placed on the floor or walls. This is explained by the high moisture absorption of polystyrene foam and its fragility. Ceramic granite slabs designed to look like stone are used as flooring and wall coverings. Decorative designs enhance the space.

The installation of foam tiles should be approached with extreme caution due to its fragility. The use of water-based paint will significantly increase resistance to moisture, which is always a lot in the bathroom

The thickness should not be chosen more than 7mm

It is important to remember that it is not advisable to wash or wipe foam products

Which tile is suitable for the bathroom, sizes, pattern

Most often they use a mosaic texture, which is made in sheet form. Sizes from 30x30 cm and above. The mosaic pattern can be mirrored, made to look like artificial stone, marble, metal, glass. If tiles are chosen for the floor, then it is best to choose a non-slip material. We should not forget about the need for access to communications. For this purpose, bathroom hatches for tiles are used, the dimensions of which must correspond to the laid squares or rectangles.

Polymer sand tiles are most often used when laying sidewalks. Some people like this finish, or a similar one, as a bathroom decor. This type of cladding can be imitated using special painting.

You can also achieve an imitation of marble and granite. It is clear that natural stone is very expensive, but the same effect can be achieved by using ceramics with the desired pattern. Visually it looks rich and unusual.

It is not necessary for the cladding to have a cold marble shade. The light beige coating looks very good. It gives the bathroom coziness and warmth. Light colors are suitable for the ceiling. It may be bluish or white. In the case where the room area is small, the floor should be dark shades like artificial stone or marble.

When materials with imitation marble or artificial stone are used in decoration, the bathroom is transformed and takes on a stylish look. Standard sizes of bathroom tiles allow this to be done. A design solution will help not only in choosing sizes and colors, but also in the direction of installation. It can be changed relative to the walls. All this will add unusualness and originality to the bathroom.

You might be interested in:

Best Bathroom Tiles: Top Ceramic Bathroom Tiles

How to remove silicone sealant: removing silicone from bathroom tiles

Tile shower tray: how to make it yourself?

Paint for bathroom tiles: what is the best paint?

Ceramic border for the bathroom: examples in the interior

How to choose tiles for a small bathroom: useful tips

Ceramic corner for the bathroom: covering the corners of the tiles

Which tile is better to choose for a bath

Model Standards for Ceramic Tile

Standard sizes of ceramic tiles for walls are set within 150x150 mm. And it is from the established dimensions that other variations are made.

For example, 25x150, 75x150, 100x150 or 150x200, 150x900. Global manufacturers produce samples of tiles for walls and other unique sizes. Some of them can go as far as tile parameters intended for floor finishing.

No less relevant is the thickness of ceramic floor tiles or the thickness of wall tiles. The standard thickness of floor tiles varies from 6 to 11 mm.

If we are talking about porcelain stoneware, the thickness of the elements can reach up to 14 mm. Modern designers love to combine tiles of different sizes, combining small elements with large ones, resulting in interesting layout variations.

Therefore, the thickness of the material should be clarified in advance so that the laying of the slabs is at the same level relative to the prepared base.

RESULTS

ROOM

RESEARCH (3203) RESEARCH (1694) RESEARCH ASSURANCE °Â (3570) ROYAL (1898) ROYAL (1003) ROYAL (894) 147) ROCK (272) ROCK (239) ROCK SAL (242) Â (352) ROOM (20) ROOM °S ÐÐ»Ñ Ð´Ð°ÑÐ¸Â (495)

Ð ÐµÐºÐ¾Ð¼ÐµÐ½Ð´ÑÐµÐ¼

REPORT (74) REPORT RESEARCH (1191) RESEARCH -Ð»Ð¸ÑÑ Ð¥Ð¸ÑÑ Ð¿ÑÐ¾Ð´Ð°Ð¶Â (42) Ð¾Ð²Ð¸Ð½ÐºÐ¸Â (107)

RESEARCH

RESEARCH (880) RESEARCH Â (494) ´ÑÑÐµÐ²Ð¾Ð¹ ÐºÐ¾Ð¼Ð½Ð°ÑÑÂ (3271) Ð ÐºÐ¾ÑÐ¸Ð´Ð¾ÑÂ (444) Ð¨ÐµÑÑÐ¸Ð³ÑÐ°Ð½Ð½ RESEARCH (122) RESEARCH ¸ÑÐºÐ°Â (45) ÐÐ»Ð¸ÑÐºÐ° ÐºÐ°Ð±Ð°Ð½ÑÐ¸ÐºÂ (88) ÐÑÑÐ¼Ð¾ÑÐ³Ð¾Ð»Ñ½Ð°Ñ Ð¿Ð»Ð¸Ñ ROYAL (1174) ROYAL ROOM (132) ROOM (96) ROOM ·Ð°Ð¸ÐºÐ¸ Â (414) PARK (275) PARK (511) CLASS (370) CLASS ¾Ð»ÑÂ (352) ÐÐ»Ñ RESEARCH (272) RESEARCH (1123) RESEARCH RESEARCH (1481) RESEARCH RUR (246) RUR (22) RUR (89) RUR (108) RUR RESULTS (810)

RESPONSIBILITY

10×10Â (113) 10×20Â (124) 10×30Â (110) 15×15Â (118) 15×40Â (5) 15×60 20×20Â (246) 25×25Â (46) 20×30Â (176 ) 20×40Â (76) 20Ñ44Â (34) 20×50Â (143) 20Ñ60Â (303) 20Ñ80 20Ñ120 25×40Â (145) 25×50 25×75 30×30Â (1021) 33×33Â ( 241) 30×60Â (431) 40×40Â (319) 42Ñ42Â (144) 45×45Â (534) 50×50Â (102) 60×15Â (89) 60×60Â (747) 60Ñ120 80×80 80×160 ½Ð¾ÑÐ¾ÑÐ¼Ð°ÑÐ½Ð° SA (1167)

ROOM

RUR (1565) RUR (2715) RUR (97) RUR (80) Ð§ÐµÑÐ½Ð¾-Ð±ÐµÐ»ÑÐ¹Â (159) Ð¤Ð¸Ð¾Ð»ÐµÑÐ¾Ð²ÑÐ¹Â (78) Ð¾Ð» SÑÐ±Ð¾Ð¹Â (512) RÐ¾ÑÐ¸ÑÐ½ÐµÐ²ÑÐ¹Â (1889) RÑÐ°ÑÐ½Ð°ÑÂ (219) RÑÐ°Ð½Ð¶ÐµÐ²ÑÐ¹Â (94) (54) (2180) (2180) › (246) › › › › ) RO" (311) RO" (270) RO" ROOM (81) ROOM (688) ROOM (111)

ROOM

ROOM (105) ROOM (12) ROOM (136) ROOM SMALL (421) ROYAL (435) ROYAL ´ÐµÑÐµÐ²Ð¾Â (586) ÐºÐ°Ð¼ÐµÐ½ÑÂ (905) Ð¾Ð´ Ð½Ð°ÑÑÑÐ°Ð»ÑÐ½ÑÐ¹ ÐºÐ°Ð¼ ROOM (895) ROOM (72) ROOM (285) ROOM (10) ROOM (34) ROOM RESULT (48) RESULT ( 175) ROOM (133) ROOM (258) ROOM (151) ROOM SOL (14) RUR (780) RUR (85) RUR · ROOM (414) ROOM ROOM (11) ROOM (797) ROOM ºÐ°ÑÂ (154) 3ÐÐ»Ð¸ÑÐºÐ°

RESULTS
RESULTS »Ð°Ð¹Ð½-Ð¼Ð°Ð³Ð°Ð·Ð¸Ð½Ðµ:
10Ñ30 Ð¿Ð¾ ºÐ¾Ð¹ ÑÐµÐ½Ðµ Ð¾Ñ 101 ÑÑÐ±Ð»ÐµÐ¹
RESULTS ROOM CONTENT:
RESULTS REPORT: