The best electric stove for saunas and baths: TOP-12 offers on the market and tips for choosing an electric heater

Design features

The main advantages of electric stoves for baths are reliability in operation and a high level of safety. They can be placed in any room, even the smallest. An electric sauna stove does not emit carbon monoxide, a gas dangerous to human life, into the surrounding air, and the heat transfer efficiency is comparable to a stone or iron wood-burning stove.

The main structural parts of an electric sauna stove are:

• Housing made of two layers of metal.
• Heating elements or tubular electric heaters.
• Thermal insulation elements (bath stones).

Such units can be installed either on a horizontal surface or have the ability to be attached to a wall, it all depends on the specific model. There are electric furnaces with two mounting methods at the same time. Typically, such stoves have a control unit. It can be either built-in or portable (in the form of a remote control).

Stones for thermal insulation must be large enough. The outer casing is made of steel elements with a cross-section of up to 4 mm, and a small gap is left between the heater and the casing for ventilation and cooling of the metal.

The top of the stove is usually shielded with sheets of iron to ensure fire safety of the bathhouse or sauna. Heating elements can heat up to temperatures of about 800 degrees. Replacement options include belt plates, which provide a lower temperature but increase the service life of the electric furnace.

Rating of the best steel stoves for baths

Relatively lightweight heating units for baths and saunas, since the body is made of steel. They combine technology and long-standing bath traditions.

1

Wood-burning sauna stove Grill'D Violet Short

Rating:5.0

• floor sauna stove
• heated volume 20 m³
• case material: steel
• chimney
• 5 cm

Average price: RUB 54,290

The manufacturer has combined style with unique technology. The body is made in the shape of a rounded polyhedron with through patterns (beautiful and effective for heat distribution). The stove is equipped with an open and closed heater to create different steam room modes. Energy is accumulated by jadeite stone, which protects against strong infrared radiation. The carrier is located in the closed heater and around the perimeter of the oven. Efficiency increases the air “pie” between the heater and the body.

Peculiarities:

• the firebox is covered with a two-millimeter stainless steel lining (increasing service life and combustion of pyrolysis gases);
• heating of the coolant occurs up to 400◦C with low heating of the lining;
• wood consumption does not exceed 4 kg per hour;
• small logs up to 30-32 mm are used;
• structural elements are painted with premium silicone and acid-heat-resistant paints.

In the middle price segment, Grill'D Violet Short is made of 09G2S steel with a service life of 2000 hours. Expensive furnaces use AISI 439 steel, which guarantees 5000 hours of operation.

2

Wood-burning sauna stove TMF Tunguska XXL 2013 Inox Vitra anthracite

Rating:4.9

• heated volume 24 m³
• case material: steel
• chimney
• 81x50x101 cm
• wood fuel

Average price: RUB 28,274

An ideal option for a dry Finnish wood-fired sauna, baths with a volume of 12-26 m3. The key to reliable operation and long service life is the design method of thermal uniform strength. Heat-loaded parts are made of high-alloy heat-resistant steel Inox 3 mm thick, the bottom of the heater and the walls of the firebox are reinforced with stringers, other parts are made of “black” steel.

Convection flow is enhanced by ventilation holes on the front panel and a mesh around the perimeter of the oven. This allows you to heat the room in record time. The location of the heat exchanger in the firebox also speeds up the process - flame energy is used for heating.

3

Wood-burning sauna stove Teplodar Sibirsky Utes Panorama 20 LP PROFI

Rating:4.8

• floor sauna stove
• heated volume 20 m³
• chimney
• 5×56.5×86 cm
• wood fuel

Average price: RUB 41,880

Because of the mesh frame, the sauna stove looks “frivolous”, but in reality it is a serious technical solution. The metal mesh increases the volume of the stones, which allows you to maintain temperature parameters until the completion of paired procedures.

Technological features:

• a multi-section steam generator produces finely dispersed steam even before the stones are completely heated;
• the chimney outlet is located at the front wall of the stove, freeing up access to the heater;
• powerful firebox runs on wood or fuel briquettes;
• stones and chimney are purchased additionally.

The main problem of mesh stoves (long heating of the room) was solved by installing a perforated convector. The invention accelerates heat exchange and additionally heats the stones with infrared radiation from the walls of the firebox.

4

Wood-burning sauna stove Berezka Corvette

Rating:4.7

• floor sauna stove
• heated volume 24 m³
• case material: steel
• chimney
• 5x41x73 cm

Average price: RUB 11,900

Corvette stove models are affordable and durable. To reduce the cost, the thickness of the walls of heat-loaded parts (within 4 - 6 mm) and removed the protective side elements. But the stove “will not burn out”: heat-rolled steel 09G2S (GOST 19281-2014) is used for the firebox, the door is made of durable cast iron. The Corvette's power is rated at a modest 8-16 m3.

Unlike expensive heaters, Corvettes are transformable stoves. The sides of the casing are removable. In their place, they put iron water heating tanks (30 or 40 liters) or install loop heat exchangers and get stoves with a tank for a Russian bath.

5

Wood-burning sauna stove TMF Sayany Cast

Rating:4.6

• heated volume 18 m³
• 74x60x80 cm
• wood fuel

Average price: RUB 30,410

Another wire mesh type iron furnace is offered by TMF. Unlike budget-class mesh stoves, a durable cast firebox made of gray cast iron (GOST 1412-85) is used here. The material contains graphite, which absorbs negative temperature amplitudes.

Technical features:

• the capacity of the stone coolant is approaching 100 kg;
• the heater is located on top of the cast-iron firebox and in the space of the surrounding grid;
• the stove runs on wood or long-flame coal (including 25 mm fraction);
• The firebox consists of a lower and upper body with a cast iron deflector to prevent emissions of combustion products.

The stove is “demanding” when it comes to wood fuel. Ideally, this is hardwood dried to 20% dry.

6

Wood-burning sauna stove Harvia M2

Rating:4.5

• floor sauna stove
• heated volume 13 m³
• case material: steel
• power 13 kW
• chimney

Average price: RUB 17,829

Good inexpensive stove. The design of the Harvia M2 is simple, but the design is as ergonomic as possible. Mobility and low weight (45 kg) allow you to reinstall the stove, and the built-in chimney (d 12 cm) and closed heater ensure safe procedures. The niche for stones is designed for 30 kg of boulders (enough for large steam rooms).

Peculiarities:

• the body is made of heat-resistant steel, but the walls are thin;
• fast heating;
• the body does not heat up - effective heat exchange releases energy into the space;
• fuel is saved due to uniform combustion;
• There is a pull-out ash drawer.

The quality of the stove's painting leaves much to be desired. The Harvia M2 firebox is designed for small logs up to 35 cm long.

7

Wood-burning sauna stove Ermak 16-PS (2012)

Rating:4.4

• floor sauna stove
• heated volume 18 m³
• case material: steel
• power 16 kW
• chimney

Average price: RUB 19,603

Thanks to the implemented principle of thermal strength, it successfully creates the microclimate of a Russian bath and the dry-air regime of a sauna. For temperature-loaded parts, 6 mm chromium steel is used, and the body and chimney are made of 3-4 mm steel. The built-in heat exchanger allows you to install a hanging tank, creating both a water stove and a steam generator.

The manufacturer offers 12 additional options, but the standard design also impresses with its ergonomics:

• enlarged combustion chamber;
• heat-resistant glass door screen (it’s nice to watch the combustion and control the process at the same time);
• self-cooling spiral door handle;
• special outlets for cleaning the ash pan;
• circulation deflectors for uniform heat transfer.

In practice, the power of Ermak 16-PS is small. Contrary to the passport 16 cubic meters, Ermak can hardly cope with 13-14 m3 with excellent thermal insulation of the steam room. The coolant capacity can be increased with a mounted heater (installed on the rear panel), but then the cost increases significantly.

8

Wood-burning sauna stove Konvetika 26 from Termofor

Rating:4.3

• floor sauna stove
• heated volume 26 m³
• chimney
• water circuit
• 9×97.2×41.7 cm

Average price: RUB 15,300

One of the best heater stoves for large baths with a steam room of 20-26 m3. The reliable firebox is made of heat-resistant steel with a high chromium content. The deep heater ensures good steam generation. Uniform heat transfer is ensured by an external convector casing with an air gap. It forms a circular convection flow, so the steam room warms up very quickly.

Peculiarities:

• extended grate bars made of cast iron – do not burn out and maintain uniform combustion);
• retractable long ash pan - helps regulate the burning temperature of firewood;
• the body is painted with heat-resistant silicone enamel;
• cleaning holes to remove soot in the firebox;
• stamped parts of the convector and frame.

The manufacturer does not install panoramic glass on the firebox door, so you won’t be able to contemplate the burning wood.

Basic operating principles

After applying voltage to the heating element, it begins to gradually heat up. This heat is transferred to coolants in the form of special stones. They accumulate heat and then release it either to the metal body (for closed-type ovens) or directly into the steam room (for open-type ovens).

For a classic Russian bath, the second option is more suitable. There are intermediate models equipped with a lid. Such electric sauna stoves can be opened at any time, increasing the convection of heated air from the heater.

Advantages and disadvantages

The positive aspects of electric sauna stoves are:

• The combination of rapid heating of a steam room and the ability to maintain the required temperature for a long time.
• Small sizes.
• Possibility of self-installation of such stoves. Unlike gas sauna stoves, permission from the gas service for installation is not required.
• There is no need to store fuel by placing it in the bathhouse; the stoves operate from a regular electrical network of 220 or 380 volts.
• An electric stove for a Russian bath does not require a smoke exhaust duct, which simplifies installation.
• It does not require cleaning from soot or periodic maintenance.
• Easy adjustment of the required oven temperature.
• Thanks to automation, unwanted overheating is eliminated.
• Such a stove does not emit carbon dioxide, it is safe for human life.
• The electric sauna stove has good heat protection, minimizing the possibility of fire in the wooden elements of the steam room.

At the same time, it is worth highlighting the disadvantages of such electrical units:

• The high cost of its maintenance, electrical energy is a fairly expensive type of fuel, and such stoves are very energy-intensive installations
• Often, powerful electric furnaces do not have enough electrical wiring life, which is designed for a lower consumed load.
• The heat generation of electric stoves is lower than that of gas or wood heating sauna stoves.

The best cast iron wood stoves for saunas

In these stoves, cast iron is used not only for the firebox elements, but also for the manufacture of the stove body. Much more massive than steel heaters. They retain heat excellently for a long time, but warm up rooms more slowly and produce soft steam.

1

Wood-burning sauna stove Hephaestus ZK 18 (M)

Rating:5.0

• floor sauna stove
• heated volume 18 m³
• body material: cast iron
• chimney
• 8×39.3×47.8 cm

Average price: 50,000 rub.

Made from SCh 20 cast iron with the addition of chromium. In the Hephaestus line, the ZK modification has more powerful steam generation and creates the ideal regime for a Russian bath. The reinforced closed heater with a capacity of 18 m3 is equipped with a recess inside the firebox (an additional deposit for steam is placed here), and the lower part in contact with the flame is also equipped with heat-removing spikes (directed inward). As a result, the heating area increases significantly, and heat transfer accelerates.

Peculiarities:

• the presence of two combustion chambers, with the heater being the second arch of the firebox;
• flame separator of the lower firebox to direct the flow of fire to the rear wall with subsequent supply to the chimney;
• an air vent under the chamber for additional oxygen, bypassing the combustion chamber;
• two types of doors - with glass and solid cast iron.

Hephaestus ZK stoves operate exclusively with cladding (included in the package). Optima or President options are available.

2

Wood-burning sauna stove Ermak 16 Mesh-Premium (Cast Iron)

Rating:4.9

• floor sauna stove
• heated volume 16 m³
• body material: combined
• power 16 kW
• chimney

Average price: RUB 33,945

Long-lasting modular cast-iron-steel oven. The reliable firebox is made of cast iron containing graphite, and the heater and complex chimneys are made of structural carbon steel. A capacious open mesh heater (aka body) forms a dry steam room mode. Lovers of Russian baths can equip the stove with a closed heater and get soft, moist steam.

The manufacturer offers up to 7 modules per oven. The heating system can be retrofitted with a steam generator, remote tank, convector, heat exchanger.

3

Wood-burning sauna stove Ermak 16 Premium (Cast iron)

Rating:4.8

• floor sauna stove
• heated volume 18 m³
• body material: combined
• power 16 kW
• chimney

Average price: RUB 29,189

Another modular cast-iron-steel stove in the Ermak 16 line. Many parameters of Premium and Premium Grids are similar: the same variability of options, multi-mode operation, volumetric firebox with fire division into 4 streams.

The main difference between the model is the volume of the heater. Here it is “only” 40 kg (for the mesh 150-200 kg), however, the options allow you to purchase a mesh heater and increase the capacity of the heat accumulator. Another feature of this model is faster heating of the premises, which is facilitated by an external convector casing along the stove body.

Video: How to choose a good stove for a wood-burning sauna

What types of electric furnaces are there?

Weight of loaded stones

Depending on the purpose of electric sauna stoves and the weight of the stones that are placed in them, all electric stoves can be divided into 3 groups:

1. Models with heaters for 20 – 40 kg.
2. Models with heaters for 60 – 120 kg.
3. Models for commercial use.

Stoves with a volume of stones up to 40 kg are perfect for small private steam rooms designed for 4 - 5 people. They are quite cheap, practical and easy to install. Their advantage is the quick heating time of the steam room, it will be no more than half an hour. An electric sauna stove like this can and should be watered frequently, and small portions of water will have to be added to it.

Electric furnaces with a weight of loaded stones ranging from 60 to 120 kg are more serious installations that are suitable for both large private bathhouses and small commercial bathhouses.

Prices for electric stoves for a bath of this type are 1.5 - 2 times higher than for stoves with a smaller volume of stone fraction.

Complete heating of such a unit occurs after 1.5 - 2 hours; such a stove gives off heat for a long time and better maintains a stable temperature regime. Adding water can be done without restrictions on the amount and time of adding.

Commercial models hold 200–280 kg of stones and are used in public steam rooms. They are able to work both in sauna and Russian classical bath modes. Such stoves are designed for steam rooms with a volume of several tens of cubic meters. Their price can be 40,000 rubles and more.

Bath electric furnace body type

There are two types of bodies for electric sauna stoves - closed and open type.

• The electric stove for an open-type Russian bath is a classic sauna stove, the stones in it are on the surface. The main disadvantage of such devices is that they cool down over time.

• Closed models of electric furnaces received the nickname “thermos” because of their design. They are made in the form of a round flask with a lid that opens on top. The stones themselves are located inside and are heated by heating elements built into the walls of the body. The big advantage of such devices is that the lid prevents the stones from cooling, and the steam is finely dispersed. Thanks to these properties, this is an excellent option for a classic Russian steam room.

TOP 5 best electric sauna stoves

Which electric sauna heater would you choose or recommend?

Take the survey

No. 5. Polytech Kristina Classic (10 kV)

The closed stainless steel heater is equipped with a band heater with a large surface area. The electrical appliance quickly and energy-efficiently heats the steam room, creating very comfortable conditions for your stay. It does not burn oxygen (this is due to the installation of a tape heater). The stove is installed on the floor and controlled by a remote control, which is not included in the package.

Polytech Kristina Classic (10 kV)

The power of the unit (10 kW) is enough to heat baths and saunas, the volume of the steam room does not exceed 15 m3. The stove weighs 16 kg and can accommodate up to 25 kg of stones.

The manufacturer has been producing heaters for more than 20 years, and its products have stood the test of time. The device can be installed not only in private baths, but also in commercial ones. It is able to work continuously for a long time.

pros

• economical energy consumption;
• quick heating of the room;
• comfortable conditions created by the stove for those who like to take a steam bath;
• quite high power;
• durability (manufacturer provides a 3-year warranty);
• simplicity of design;
• Possibility of control using a remote control.

Minuses

• The control panel must be purchased separately;
• lack of a steam generator.

Prices for Polytech Kristina Classic (10 kV)

Polytech Kristina Classic (10 kV)

No. 4. Harvia Sound M45

Harvia Sound electric heaters from the Finnish manufacturer are distinguished by their attractive appearance. They are available in three colors: champagne, metallic and platinum. The design of the unit can decorate any steam room. It is an excellent option for installation in small steam rooms (up to 6 cubic meters). The oven is equipped with a built-in control panel (for the M45E version it is possible to use a remote control panel), it is equipped with a timer and thermostat.

Harvia Sound M45

For mounting (hanging), the included brackets are used. The unit is equipped with overheating protection (it turns off when the temperature rises above the limit level). The heater, which weighs 6.5 kg, can accommodate up to 9 kg of stones. The device is made of stainless and galvanized steel.

pros

• good quality;
• practicality:
• decent functionality;
• Beautiful design;
• long-term heat retention;
• double wall housing;
• overheat shutdown, delayed start.

Minuses

The disadvantage is the rather high cost for a model with a power of 4.5 kW.

Prices for Harvia Sound M45/h3>

Harvia Sound M45

No. 3. Sawo Mini X MX-30NB-Z

The model is intended for equipping a small-sized steam room with a volume of up to 4 m3. It holds up to 9 kg of stones. This quantity is enough to provide a company of up to 3 people with light, finely dispersed steam. The body is made of stainless steel (outside) and galvanized steel (inside). Wall mounting and the shape of the unit allow you to save as much usable space as possible. Despite its compact dimensions (330 x 450 x 320 cm), the heater has excellent functionality. The device is connected to 220 and 380 V networks. The control panel, located on the front of the oven, has a clear interface. It is possible to program the operating mode, as well as change parameters during the vaping process.

Sawo Mini X MX-30NB-Z

pros

• high-quality assembly;
• reliability;
• ergonomics;
• compactness;
• functionality;
• safety;
• fast heating;
• affordable cost;
• ease of control.

Minuses

• lack of a steam generator;
• stones must be purchased separately.

Prices for Sawo Mini X MX-30NB-Z

Sawo Mini X MX-30NB-Z

No. 2. EOS Finnrock (7.5 kV)

A graphite-colored heater with a mother-of-pearl effect from a German manufacturer is suitable for installation in medium-sized rooms (private and commercial) with a volume of up to 12 cubic meters. It is placed on the floor. The main difference between this model and other electric ovens is the partially open compartment for placing stones. The front panel is made of an interlacing of massive ribbons, directed in such a way that the steam from the evaporating water is directed upward. The back of the unit is flat, the terminal block is recessed into the housing. As a result, the stove looks very aesthetically pleasing and can be installed in the center of the steam room.

EOS Finnrock (7.5 kV)

The electrical device weighs 25 kg, it can hold up to 40 kg of stones (included in the package). Control is carried out by a remote unit.

pros

• reliable operation;
• three-year warranty (for domestic use);
• partially open compartment with stones;
• attractive design.

Minuses

The main disadvantage of the model is its high price, which scares off potential consumers.

Prices for EOS Finnrock (7.5 kV)

EOS Finnrock (7.5 kV)

No. 1. Sawo SCANDIA SCA-60NB-Z

The open type model, equipped with a heating element, is installed in rooms with a volume of 5...9 cubic meters. Due to the fact that production was established in Asia, its price became very attractive. You can put 22 kg of stones in the basket, which, when water hits them, produce a large amount of soft steam. The outer part of the case is made of stainless steel, the internal filling is made of galvanized steel.

Sawo SCANDIA SCA-60NB-Z

Control is carried out by a built-in remote control, with which you can set the temperature and duration of operation. The presence of a timer creates additional convenience for the user.

pros

• Ease of Management;
• high quality workmanship;
• budget cost;
• small dimensions;
• long service life.

Minuses

No shortcomings were identified in the unit.

Prices for Sawo SCANDIA SCA-60NB-Z

Sawo SCANDIA SCA-60NB-Z

Table. Comparison of the best models of electric sauna stoves.

Video - Installation of an electric heater in a sauna

Criterias of choice

The modern market offers many options for such units. The question of how to choose an electric stove for a bath is not so simple. The main selection criteria should be taken into account, these include:

1. Preliminary calculation of the volume of the steam room.
2. Furnace controls.
3. Type of heating circuit.
4. Design issues.
5. Availability of a certificate of product conformity to Russian standards.

There is a simple relationship between the volume of the steam room and the power that the stove installed in it should produce. For 1 cubic meter of steam room there should be 1 kW of power. This calculation is approximate, but with its help the buyer can determine the choice of electric stove of the required performance.

The control panel for a sauna stove can be either remote (remote), installed in another room (in the dressing room), or built into the body of the electric stove itself.

Heating elements for electric sauna stoves can be of three types:

• Tubular (heating elements), made in the form of a tape. Heating elements are capable of heating air to very high temperatures, but they have a serious drawback - they are fragile and their service life is short, and the heating process is slow. Reliable stainless steel heating elements are very expensive. Tape elements are more profitable, heat up faster and are more reliable than heating elements.

• Combined type. The combined type of heaters is the most expensive, but it is the one that ensures the fastest and highest quality heating of the air in the steam room.

Electric sauna stoves, as well as wood-burning ones, can be made in any style. They can be located in the middle of the room, stand in a corner, or hang on the wall.

Additionally, you can purchase inlays made of soapstone or soapstone; this will not only decorate the stove, but will also provide additional protection from the effects of high temperatures on the walls of the steam room. Such stone panels retain heat well and can be an excellent complement to the stones inside the stove.

When choosing a stove, you should pay attention to the availability of a valid safety certificate for it and the materials from which it is made.

Electric stove for a bath.

Electric sauna stoves have low and medium power (up to 18 kW) and are used in small-volume home steam rooms.

All work on connecting sauna electrical equipment must be carried out only by a qualified electrician. To ensure safe operation, the heater must be connected to the electrical network with a dedicated cable, the room must have a separate grounding circuit, the sockets used must be moisture-proof, and the stove body must be grounded.

Electric stoves for baths and saunas have a number of advantages:

• the fuel is electricity - this means there is no need to replenish firewood, this means cleanliness in the steam room, because no wood debris;
• there is no smoke and no carbon monoxide - this is an environmentally friendly device and the ability to install anywhere in the room, because no chimney needed;
• You can stop the heater at any time;
• remote control thanks to the presence of a control panel;
• electric sauna stoves have a built-in thermostat and overheating sensor - you do not need to control the operation of the device, fearing that the equipment will overheat and fail;
• a wide variety of design solutions.

Our brief review is coming to an end. We hope that you have received the necessary information that will help you navigate the variety of products offered and buy an electric sauna stove that fully meets your wishes. We invite you to visit our showrooms, where you can get detailed advice from experienced managers on the selection of equipment, see some models live, get acquainted with catalogs and order an electric sauna stove, the price, appearance and performance of which will be optimal.

Popular models

1. Polytechnic Cristina Classic. The model is suitable for a steam room with a volume of 10 - 15 cubic meters. meters, its power is 10 kW, the weight of stones is 25 kg, the price is 16,800 rubles.

2. Stream Gross 1 Heat boost. The stove is suitable for steam rooms with a volume of 8 - 14 cubic meters. meters, its power is 10 kW, the weight of the laid stones is 31.7 kg, the cost is 36,600 rubles.
3. Narvi NM600. Finnish product, recommended steam room volume 6 - 9 cubic meters. meters, furnace power 6 kW, weight of stones 30 - 40 kg, cost - 13,200 rubles.

4. Helo Himalaya 105DE. An electric furnace of Finnish-German production with a power of 10.5 kW is capable of heating a steam room with a volume of 9 - 15 cubic meters. meters, the weight of the stones being laid is 100 kg, it costs 50,500 rubles.

5. Harvia Cillindro PC70E Steel. Stove from Finland for steam rooms with a volume of 6 - 10 cubic meters. meters, power 6.9 kW, weight of laid stones 90 kg, cost - 17,400 rubles.

6. Tylo Combi Compact RC3. Swedish low-power stove of 3 kW, suitable for rooms with a volume of 1.5 - 4.5 cubic meters. meters, the weight of the stones is only 7 kg, the price is 67,000 rubles.

7. Tylo Expression 10. A more powerful electric sauna stove with a capacity of 10 kW, for steam rooms with a volume of 10 - 18 cubic meters. meters. It contains 12 kg of stones, and the price is 97,000 rubles.

8. Tylo SD 20. Powerful 20 kW device, for rooms with a volume of 22 - 43 cubic meters. meters, the weight of the stones being laid is 32 kg, the cost is 91,000 rubles.

9. Thermofor Primavolta. This Russian-made electric sauna stove can heat a room of up to 5 cubic meters. meters, its maximum power is 9 kW. It holds 50 kg of stone and costs 12,000 rubles.

10. Dushka EKM-18 NMT. Russian powerful 18 kW stove for large steam rooms of 21 - 30 cubic meters. meters. You can put 65 kg of stone in it, the price is only 12,300 rubles.

The best models of electric sauna stoves

Domestic manufacturers offer series that deserve attention both because of affordable prices and due to their maximum adaptability to Russian conditions. Among foreign analogues, Finnish units are most in demand.

SteamGross 1

The floor-standing model from the manufacturer Teplodar exhibits high power and has a built-in steam generator. The household device weighs 32 kg, the volume of the steam room can reach 15 cubic meters. meters. The interval between starting the oven and the start of vapor production is only 5 minutes. The working stone is jadeite; it cannot be replaced with marble or limestone. It is important that the tank does not remain empty when the device is activated.

In the SteamGross 1 oven, the built-in tank allows the steam generator to maintain the desired microclimate for about 6 hours

KristinaClassic

Silver heaters under the Polytech brand are actively used in the arrangement of home and domestic baths and saunas. Stainless steel is used to make the casing; in active mode, the casing does not burn. Tape-type heating elements ensure prompt achievement of the required temperature level; this is one of the competitive advantages of the model. The heating element has an increased heat transfer area, therefore, subject to economical energy consumption, the device can quickly warm up a steam room with a volume of 15 cubic meters. meters.

Control can be carried out using manual and remote mechanisms; in the latter case, you must separately purchase a remote control, since it is not included in the basic package. The entire series of equipment is characterized by positive user reviews, but you need to keep in mind that in order to achieve the desired result, when choosing a modification, you must take into account the volume of the steam room.

The KristinaClassic stove is often used for home baths and saunas

The Polytech lines have high safety indicators; a fuse and a stable thermostat protect the device from overheating. When compared with foreign analogues with similar characteristics, this copy will cost 30-40% less. The manufacturer offers a 3-year warranty on the product.

Rules for installing electric sauna stoves

Requirements SNiP 41-01-2003

This document regulates the basic rules for placing electric furnaces from a fire safety point of view:

• The stove must be installed in a corner closer to the entrance, however, subject to the requirements of SNiP, installation in the center of the room is also allowed.
• The floor where the stove is installed is covered with non-combustible materials.
• The distance between the wall and the furnace body must be at least 0.5 meters in the absence of a screen. If such protection is installed, it is allowed to place the electric oven closer.
• There should be a hole in the area of ​​the heater for fresh ventilation.
• The furnace body must be protected by a fence located at a distance of at least 70 cm.

.

How to install the housing and controls?

The first step is to wash and dry the stones, place them and turn on the stove. When connecting an empty stove, the heating elements will burn out. When installing the control panel, the following requirements must be met:

• The external remote control is installed in a room where there are no elevated temperatures.
• The wiring is done in advance.
• The power that the electrical panel and wires can withstand must not be lower than the power of the electric furnace.
• The presence of an RCD is required.
• In order to avoid contact between wires and heated walls, they are laid in a special bus made of fireproof material.

Installation of sensors and grounding

It is recommended to use only cables made of heat-resistant material. The presence of twists is excluded; all wire sections must be intact. Sensors are usually mounted above the door, heater and steam benches.

GOST 12.1.030-81 requirements and electrical wiring cross-section

According to GOST 12.1.030-81, the electrical circuit must be grounded directly or grounded through the shield. As mentioned above, the power that the wiring can withstand must be higher than the power of the furnace itself. The selection of conductor cross-sections is made according to special tables.

.

Nuances of operation

The electric furnace does not require particularly careful maintenance, but you still need to follow the basic rules of its operation. The main point is compliance with the rules of electrical safety and ventilation of steam rooms.

Do not allow water to come into contact with wires or electrical heating parts of the oven. In the steam room, you should always ensure the minimum permissible air circulation. To avoid rapid burnout of the heating elements, the load must be applied smoothly immediately after starting the furnace.

Final points

A sauna with an electric stove is a powerful consumer of electricity. When choosing, it will be very important to pay attention to the electricity consumption of the stove; this will save significant amounts, even if the stove is quite expensive.

From an aesthetic point of view, foreign models are superior to their Russian counterparts, but they are also more expensive. Specific options should be considered based on financial capabilities when purchasing, as well as taking into account the volume of the steam room and the power that the electrical wiring and transformer can withstand.