The modern building materials market can please with a new type of basalt insulation - Ecover. It is absolutely safe for humans, since it is produced exclusively from rocks. Due to its unique properties, it is able to withstand various types of loads and environmental influences.
Ecover emblem
The brand itself offers a wide variety of thermal insulators for all occasions.
Application of insulation
This material is used for all types of structures to provide a durable and reliable layer of sound and heat insulation. Basically, Ecover is intended for installation on:
- frame walls;
- attics;
- attics;
- internal partitions;
- floors;
- facades.
Thermal insulation has high thermal protection and physical and mechanical properties, which guarantees the creation of an optimal microclimate in the room and durability.
Roof insulation using Ecover light
*
Main characteristics of EKOVER slabs for thin-layer plaster systems
| Name | Thermal conductivity coefficient under operating conditions, W/(m∙K) | Ultimate peel strength of layers, kPa, not less | Strength at 10% deformation, kPa, not less | Slab thickness (in 10 mm increments), mm | |
| A | B | ||||
| ECOVER ECOFACADE | 0,039 | 0,041 | 15 | 40 | 50-250 |
| ECOVER FACADE-DECOR OPTIMA | 0,039 | 0,041 | 17 | 45 | 30-200 |
| ECOVER FACADE-DECOR | 0,040 | 0,042 | 20 | 50 | 30-200 |
Manufacturer information
Ecover thermal insulation is produced at a modern Russian plant in the Sverdlovsk region. The choice of location was based on proximity to deposits of the gabbro-basalt group of rocks. Thanks to advanced technical equipment, the production of high-quality products is achieved that can solve issues of improving the energy efficiency and environmental friendliness of buildings.
The insulation composition includes: mineral wool created on the basis of rock and a binding component of synthetic origin. At the same time, it complies with all current standards of GOST 9573-2012.
Features of the material
The properties of Ecover Light allow us to talk about the practicality and necessity of this material:
- preservation of room heat due to the fact that the material has a high thermal conductivity coefficient (0.035 W per square meter);
- due to the fibrous structure, the absorption of extraneous noise is ensured;
- environmental friendliness - only natural materials are used in production;
- fire safety and flammability - the temperature at which the material begins to melt must exceed 1000 degrees Celsius;
- water resistance - not susceptible to moisture;
- vapor permeability – Ecover perfectly allows air and steam to pass through without creating a greenhouse effect in the room;
- inertness to biological and chemical factors;
- ability to withstand heavy loads without deforming the structure.
What Ecover Light looks like
Ecover Light has the following characteristics:
- Dimensions: 100 cm – length and 60 cm – width.
- Density – 28 – 60 kg/cubic. meter.
- Thickness – 50 – 200 mm.
- Moisture absorption does not exceed 1.5 percent of the total volume.
- The degree of compressibility is 8 - 15 percent.
- Group of non-combustible materials.
- Melting point 1000 degrees.
*
Types of basalt insulation
The company’s product range is not as wide as that of Knauf or Isover, however, both inexperienced craftsmen and professionals will find the optimal thermal insulation option.
Useful: Lighting in a wooden house: choice of lamps, important installation nuances
Universal insulation: application and characteristics
Universal thermal insulation is represented by three names: Ecover Universal, Light, Standard. All of them are designed for insulation of non-load-bearing structures :
- floors on joists;
- pitched roofs;
- internal walls of buildings;
- interior partitions;
- attic floors;
- air ducts and pipelines heating up to no higher than 400°C.
Ecover Light and Standard can also be used as insulation when constructing a ventilation facade (bottom layer), in three-layer laminated masonry. All three names are distinguished by hydrophobicity, low compressibility, and minimal shrinkage. The standard width is 60 mm, while the thickness can vary between 40-250 mm. The thermal conductivity coefficient is 0.037 W/m·K. Only for Ecover Standard thermal insulation it is equal to 0.034 W/m·K.
Facade thermal insulation - types and technical characteristics
Thermal insulation of this type can be divided into mineral wool boards for plaster and ventilation facades. For facades with a thin layer of plaster, you can use Ecover Ecofacade, Ecofacade Optima, Ecofacade Standard. This insulation is characterized by:
- high compressive and tensile strength;
- light weight, which reduces the load on fasteners;
- good adhesion of the adhesive layer;
- high sound absorption rate;
- thermal conductivity coefficient 0.035 W/m·K.
For external insulation with plastering over a reinforcing mesh, Ecover Facade Decor, Facade Decor Optima, Facade Decor Lamel are suitable. The latter type of thermal insulation can also be used under clinker tiles. Ecover Vent-Facade is suitable as a thermal insulation layer (single or top) when installing ventilated facades. These mineral wool slabs have a low thermal conductivity coefficient, are not blown by air currents from the street, and do not absorb moisture from the surrounding air. They can be easily combined with Ecover Standard, Light, Light Universal insulation.
Materials for roof insulation
If the Ecover company offers universal mineral wool slabs for insulating pitched roofs, then for flat roofs it offers a special line. It is presented on the official website and includes the following items:
- Ecover Roofing. This material is used for thermal insulation in one layer both under a cement screed and without it. It is also suitable for working with attic floors and floors above a cold basement.
- Ecover Roof Bottom. Can be used as a single-layer insulation under a cement screed, internal thermal insulation in a two-layer system, internal thermal insulation in combination with extruded polystyrene foam . Ideal for installation on metal substrates.
- Ecover Roof Top. Application – external thermal insulation in a two-layer flat roof insulation system.
All three types of plates are characterized by high compressive strength and low thermal conductivity. Ecover Roofing Top also ensures optimal load distribution on the lower layer of roofing insulation. When using it, it is possible to install waterproofing without additional screed .
Useful: How to use sawdust for thermal insulation
Thermal and sound insulation for floors
Mineral wool boards Step, Step Optima, Step Plus are high-quality heat and sound insulation for:
- heated floors under a concrete screed directly over the insulation;
- interfloor ceilings;
- "floating" acoustic floors;
- basement insulation.
The floor slab provides high-quality sound insulation (shock noise absorption ) even with a minimum thickness of 20 mm. The presence of a concrete screed significantly improves this indicator. Thermal insulation Ecover Step is characterized by increased elasticity and low thermal conductivity.
Industrial and technical thermal insulation
Industrial thermal insulation is represented by Sandwich C (walls) and Sandwich K (roof) slabs. In three-layer panels covered with steel sheets, they act as a heat and sound insulating material. This line of insulation is the most durable of the entire range presented by the company . The compressive, tensile and shear strength of Sandwich C is 50, 90, 35 kPa, respectively. The same parameters for Sandwich K are much higher - 85, 130, 70 kPa. Both materials have increased moisture resistance.
Technical thermal insulation is also represented by two names: Ecover Fire Protection Concrete, Fire Protection Metal. The first is used as a fire-resistant cladding for reinforced concrete structures and utilities . The second is for the same purposes, but for metal structures.
Please note: insulation slabs can be secured to concrete using disc-shaped dowels. They are fixed to metal using both mechanical and adhesive methods.
These insulation materials are resistant to moisture and aggressive environments , are characterized by high strength, and are suitable for applying decorative coatings.
Ecover mineral wool boards are a high-quality material for various types of insulation. The availability of the range in construction stores and the price-quality ratio make the thermal insulation of this brand attractive to a wide range of consumers.
Types of products
Depending on its purpose, insulation is available in several popular types, which differ in parameters and scope of application.
Insulation of walls using basalt insulation
- Station wagon. This line is used for interior work in private homes. This includes:
- Ecover Light - has 3 types of density: 30 kg, 35 kg and 45 kg per square meter. They have a low level of moisture absorption (1%) and a standard type of thermal conductivity - 0.035-0.042 W per mK. Compression ratio – 20%;
- Ecover Light Universal - used for surfaces exposed to temperatures of no more than 400 degrees. Compression ratio – 25%. Density – 28 kg per cubic meter. The package has 12 plates, the total volume of which is 0.36 cubic meters;
- acoustic – designed to absorb noise, there is no shrinkage. Material density – 35 kg per cubic meter. Designed for installation on frame partitions, internal walls, ceilings between floors, on the ceiling of a room and between joists;
- standard 50 - has two types of density 50 kg and 60 kg per cubic meter. The compression percentage does not exceed 6%. Differs in increased strength indicators. The slabs are packed in 12 pieces. Volume – 0.36 cubic meters.
Specifications
The basis of all brand insulation is high-tech stone wool extracted from rocks. Product Specifications:
- density - from 30 to 60 kg/m3 (depending on the type of mineral wool);
- thermal conductivity - 0.035–0.041 W/m*K;
- water absorption - not higher than 1.5% kg/m2;
- sound absorption - up to 0.85;
- melting temperature of fibers - 1000°;
- the content of organic segments is less than 4%.
Ecover mineral wool is produced in the form of slabs measuring 1.0 * 0.6 m, with a thickness ranging from 30–250 mm. Thanks to these parameters, the options for using thermal insulation have been expanded. The choice of product brand depends on the required insulation thickness.
Parameters Ecover Standard
| Meaning | Measurement |
| Nominal Density | 45 kg per cubic meter |
| Thermal conductivity | 0.035-0.036 W per mK |
| Amount of organic matter | 3% by weight |
| Moisture absorption | No more than 1 kg per sq.m. |
*
The presented types are mounted mainly on loggias and joists.
- Series for facades. It includes slabs with increased density and better thermal insulation properties. The line includes:
- Eco-facade - mounted on walls, under a thin layer of plaster. Withstands up to 40 kPa. The degree of thermal conductivity is 0.035-0.041 VK per mK;
- decor - have a thickness from 2 to 20 cm, peel strength exceeds 80 kPa, thermal conductivity - 0.039-0.043 W per mK. The insulation for the facade is packaged in 6 slabs, measuring 100x60x5 cm. Volume - 3.6 square meters.;
- ventilated façade 80, 90 – used both for exterior finishing and for finishing with plaster with reinforced mesh on the surface. Density varies from 70 to 120 kg per cubic meter. The degree of moisture absorption is 0.75 percent. Packaging – 12 slabs measuring 100x60x5 cm and a volume of 0.36 cubic meters.
Indicators of main characteristics
| Meaning | Measurement indicator | Number |
| Heat conductivity at 10/25 degrees | Watts per mK | does not exceed 0.035 – 0.037 |
| Tensile strength | kPa | not less than 40 |
| Number of organic components | % | no more than 4 by weight |
- For the roof. This model range includes slabs with a higher degree of rigidity. Scope of application: used roofs. Density degree – 135 – 150 kg per cubic meter. Not recommended for use in attics and basements. The thickness of the material is 5 – 20 cm. Moisture absorption does not exceed 0.75%. The amount of organic substances in the composition is no more than 4.5%. Ecover for roofing is packed in 8 sheets, each of them has dimensions of 100x60x5 cm. Volume - 0.24 cubic meters.
Characteristics table
| Meaning | What is it measured in? | Type | |
| 135 | 150 | ||
| Nominal density indicator | kg per cubic meter | 135 | 150 |
| Heat conductivity rate at 10/25 degrees | Watts per mK | 0,038 – 0,039 | 0,038 – 0,039 |
| Compression | kPa | not less than 45 | not less than 50 |
| Strength under direct load | N | not less than 600 | not less than 650 |
| Tensile strength limit | kPa | about 10 | about 12 |
- For the floor. Here Ecover Step is used with a density of 135 kg per cubic meter. and Step + - 150 kg per cubic meter. Scope of application: installation of floors, basement floors and basements. Additionally, underfloor heating, concrete or cement-sand screed can be laid on the insulation. Ability to withstand loads – 30-35 kPa.
Floor insulation Ecover Light
Technical characteristics of the material
| Meaning | Measurement | Quantity |
| Thermal conductivity 10 – 25 degrees | Watts per mK | 0,035 – 0,037 |
| Compression ratio | kPa | not less than 35 |
| Moisture absorption | kg per sq.m. | does not exceed 0.75% |
| Presence of organic matter | % | no more than 4 |
*
Ecover basalt insulation
Moscow Change the region if we made a mistake
8 from 9:00 to 18:00 Call back
Send a request
Sale! We are selling the remains of Technoelast EMP for 238 rubles per square meter. The quantity of material is limited!
- Send a request
- Contacts
- Delivery
- Payment
- About company
- DOM TECHNONICOL
0
- Roofing Flexible tiles Tiles
- Ridge-eaves tiles
- Underlay carpets
- Valley carpets
- Slats for flexible tiles
- Nails for flexible tiles
- Pass-through element
- Adhesives and mastics
- Metal tile sheets
- Roof tiles
- Ridge tiles
- Flat slate
- Roof aerators
- Roof ventilation Aero elements
- Gutter
- Window
- TPO membranes
- Thermal insulation Basalt (stone) wool
- Roll waterproofing
- Soundproofing mats
- Roofing waterproofing Rolled roofing waterproofing
- Sealants Acrylic sealant
- Drywall Plasterboard sheet (GKL)
- Plywood
- Aerated concrete blocks
- Formwork for walls Large panel formwork Linear formwork panels
- Waterproofing films
- Facade tiles
- Facing stone
- Vinyl siding
- Soffit
- J-profile
- Terrace board (decking)
- Facade plaster
- Paints
- Gravity polypropylene sewer system
- Plasters Leveling plasters
- Tile adhesives
- Geotextiles
- Bolts Stainless steel bolt
- Construction nails
- Construction staples
Minimum order amount 10,000 ₽
Cart (0) Comparison (0)
Entrance
Minimum order amount 10,000 ₽
- Catalog
- Catalog
- Roofing Flexible tiles Tiles
- Ridge-eaves tiles
- Underlay carpets
- Valley carpets
- Slats for flexible tiles
- Nails for flexible tiles
- Pass-through element
- Adhesives and mastics
- Roof tiles
- Ridge tiles
- Flat slate
- Roof aerators
- Roof ventilation Aero elements
- Gutter
- Window
- TPO membranes
- Thermal insulation Basalt (stone) wool
- Roll waterproofing
- Soundproofing mats
- Roofing waterproofing Rolled roofing waterproofing
- Sealants Acrylic sealant
- Drywall Plasterboard sheet (GKL)
- Plywood
- Aerated concrete blocks
- Formwork for walls Large panel formwork Linear formwork panels
- Waterproofing films
- Facade tiles
- Facing stone
- Vinyl siding
- Soffit
- J-profile
- Terrace board (decking)
- Facade plaster
- Paints
- Gravity polypropylene sewer system
- Plasters Leveling plasters
- Tile adhesives
- Geotextiles
- Bolts Stainless steel bolt
- Construction nails
- Construction staples
- Insulation
Roof
- Thermal insulation
Waterproofing
- Basalt (stone) wool
Extruded polystyrene foam (XPS)
Basalt (stone) wool Basalt insulation Ecover
- 120
Show by
- 120
Basalt wool Ecover Acoustic 1000x600x100 mm 6 slabs 1,342 RUR/pack
Compare In comparison
Basalt wool Ecover Acoustic 1000x600x50 mm 8 slabs 894.72 RUR/pack
Compare In comparison
Basalt wool Ecover Vent-Facade 120 1000x600x100 mm 4 slabs 2,446 RUR/pack
Compare In comparison
Basalt wool Ecover Vent-Facade 120 1000x600x50 mm 6 slabs 1,835 RUR/pack
Compare In comparison
Basalt wool Ecover Vent-Facade 70 1000x600x100 mm 4 slabs 1,562 RUR/pack
Compare In comparison
Basalt wool Ecover Vent-Facade 70 1000x600x50 mm 8 slabs 1,562 RUR/pack
Compare In comparison
Basalt wool Ecover Vent-Facade 80 1000x600x100 mm 4 slabs 1,753 RUR/pack
Compare In comparison
Basalt wool Ecover Vent-Facade 80 1000x600x50 mm 8 slabs 1,753 RUR/pack
Compare In comparison
Basalt wool Ecover Vent-Facade 90 1000x600x100 mm 4 slabs 1,922 RUR/pack
Compare In comparison
Basalt wool Ecover Vent-Facade 90 1000x600x50 mm 8 slabs 1,922 RUR/pack
Compare In comparison
Basalt wool Ecover Roof 135 1000x600x100 mm 3 slabs 2,067 RUR/pack
Compare In comparison
Basalt wool Ecover Roof 135 1000x600x50 mm 6 slabs 2,067 RUR/pack
Compare In comparison
Basalt wool Ecover Roof 150 1000x600x100 mm 3 slabs 2,274 RUR/pack
Compare In comparison
Basalt wool Ecover Roof 150 1000x600x50 mm 4 slabs 1,516 RUR/pack
Compare In comparison
Basalt wool Ecover Roof Top 160 1000x600x50 mm 6 slabs 2,405 RUR/pack
Compare In comparison
Basalt wool Ecover Acoustic 1000x600x100 mm 6 slabs 1,342 RUR/pack
Compare In comparison
Basalt wool Ecover Acoustic 1000x600x50 mm 8 slabs 894.72 RUR/pack
Compare In comparison
Basalt wool Ecover Vent-Facade 120 1000x600x100 mm 4 slabs 2,446 RUR/pack
Compare In comparison
Basalt wool Ecover Vent-Facade 120 1000x600x50 mm 6 slabs 1,835 RUR/pack
Compare In comparison
Basalt wool Ecover Vent-Facade 70 1000x600x100 mm 4 slabs 1,562 RUR/pack
Compare In comparison
Basalt wool Ecover Vent-Facade 70 1000x600x50 mm 8 slabs 1,562 RUR/pack
Compare In comparison
Basalt wool Ecover Vent-Facade 80 1000x600x100 mm 4 slabs 1,753 RUR/pack
Compare In comparison
Basalt wool Ecover Vent-Facade 80 1000x600x50 mm 8 slabs 1,753 RUR/pack
Compare In comparison
Basalt wool Ecover Vent-Facade 90 1000x600x100 mm 4 slabs 1,922 RUR/pack
Compare In comparison
Basalt wool Ecover Vent-Facade 90 1000x600x50 mm 8 slabs 1,922 RUR/pack
Compare In comparison
Basalt wool Ecover Roof 135 1000x600x100 mm 3 slabs 2,067 RUR/pack
Compare In comparison
Basalt wool Ecover Roof 135 1000x600x50 mm 6 slabs 2,067 RUR/pack
Compare In comparison
Basalt wool Ecover Roof 150 1000x600x100 mm 3 slabs 2,274 RUR/pack
Compare In comparison
Basalt wool Ecover Roof 150 1000x600x50 mm 4 slabs 1,516 RUR/pack
Compare In comparison
Basalt wool Ecover Roof Top 160 1000x600x50 mm 6 slabs 2,405 RUR/pack
Compare In comparison
Basalt wool Ecover Roof Top 160 1000x600x40 mm 8 slabs 2,565 RUR/pack
Compare In comparison
Basalt wool Ecover Acoustic 1000x600x100 mm 6 slabs 1,342 RUR/pack
Compare In comparison
Basalt wool Ecover Acoustic 1000x600x50 mm 8 slabs 894.72 RUR/pack
Compare In comparison
Basalt wool Ecover Vent-Facade 120 1000x600x100 mm 4 slabs 2,446 RUR/pack
Compare In comparison
Basalt wool Ecover Vent-Facade 120 1000x600x50 mm 6 slabs 1,835 RUR/pack
Compare In comparison
Basalt wool Ecover Vent-Facade 70 1000x600x100 mm 4 slabs 1,562 RUR/pack
Compare In comparison
Basalt wool Ecover Vent-Facade 70 1000x600x50 mm 8 slabs 1,562 RUR/pack
Compare In comparison
Basalt wool Ecover Vent-Facade 80 1000x600x100 mm 4 slabs 1,753 RUR/pack
Compare In comparison
Basalt wool Ecover Vent-Facade 80 1000x600x50 mm 8 slabs 1,753 RUR/pack
Compare In comparison
Basalt wool Ecover Vent-Facade 90 1000x600x100 mm 4 slabs 1,922 RUR/pack
Compare In comparison
Basalt wool Ecover Vent-Facade 90 1000x600x50 mm 8 slabs 1,922 RUR/pack
Compare In comparison
Basalt wool Ecover Roof 135 1000x600x100 mm 3 slabs 2,067 RUR/pack
Compare In comparison
Basalt wool Ecover Roof 135 1000x600x50 mm 6 slabs 2,067 RUR/pack
Compare In comparison
Basalt wool Ecover Roof 150 1000x600x100 mm 3 slabs 2,274 RUR/pack
Compare In comparison
Basalt wool Ecover Roof 150 1000x600x50 mm 4 slabs 1,516 RUR/pack
Compare In comparison
Basalt wool Ecover Roof Top 160 1000x600x50 mm 6 slabs 2,405 RUR/pack
Compare In comparison
Basalt wool Ecover Acoustic 1000x600x100 mm 6 slabs 1,342 RUR/pack
Compare In comparison
Basalt wool Ecover Acoustic 1000x600x50 mm 8 slabs 894.72 RUR/pack
Compare In comparison
Basalt wool Ecover Vent-Facade 120 1000x600x100 mm 4 slabs 2,446 RUR/pack
Compare In comparison
Basalt wool Ecover Vent-Facade 120 1000x600x50 mm 6 slabs 1,835 RUR/pack
Compare In comparison
Basalt wool Ecover Vent-Facade 70 1000x600x100 mm 4 slabs 1,562 RUR/pack
Compare In comparison
Basalt wool Ecover Vent-Facade 70 1000x600x50 mm 8 slabs 1,562 RUR/pack
Compare In comparison
Basalt wool Ecover Vent-Facade 80 1000x600x100 mm 4 slabs 1,753 RUR/pack
Compare In comparison
Basalt wool Ecover Vent-Facade 80 1000x600x50 mm 8 slabs 1,753 RUR/pack
Compare In comparison
Basalt wool Ecover Vent-Facade 90 1000x600x100 mm 4 slabs 1,922 RUR/pack
Compare In comparison
Basalt wool Ecover Vent-Facade 90 1000x600x50 mm 8 slabs 1,922 RUR/pack
Compare In comparison
Basalt wool Ecover Roof 135 1000x600x100 mm 3 slabs 2,067 RUR/pack
Compare In comparison
Basalt wool Ecover Roof 135 1000x600x50 mm 6 slabs 2,067 RUR/pack
Compare In comparison
Basalt wool Ecover Roof 150 1000x600x100 mm 3 slabs 2,274 RUR/pack
Compare In comparison
Basalt wool Ecover Roof 150 1000x600x50 mm 4 slabs 1,516 RUR/pack
Compare In comparison
Basalt wool Ecover Roof Top 160 1000x600x50 mm 6 slabs 2,405 RUR/pack
Compare In comparison
Basalt wool Ecover Roof Top 160 1000x600x40 mm 8 slabs 2,565 RUR/pack
Compare In comparison
Basalt wool Ecover Roof Top 175 1000x600x50 mm 4 slabs 1,740 RUR/pack
Compare In comparison
Basalt wool Ecover Roof Top 175 1000x600x40 mm 7 slabs 2,437 RUR/pack
Compare In comparison
Basalt wool Ecover Roof Top 160 1000x600x40 mm 8 slabs 2,565 RUR/pack
Compare In comparison
Basalt wool Ecover Roof Top 175 1000x600x50 mm 4 slabs 1,740 RUR/pack
Compare In comparison
Basalt wool Ecover Roof Top 175 1000x600x40 mm 7 slabs 2,437 RUR/pack
Compare In comparison
Basalt wool Ecover Roof Top 190 1000x600x50 mm 4 slabs 1,867 RUR/pack
Compare In comparison
Basalt wool Ecover Roof Top 190 1000x600x40 mm 7 slabs 2,614 RUR/pack
Compare In comparison
Basalt wool Ecover Roof Bottom 1000x600x100 mm 4 slabs 1,891 RUR/pack
Compare In comparison
Basalt wool Ecover Roof Bottom 1000x600x50 mm 8 slabs 1,891 RUR/pack
Compare In comparison
Basalt wool Ecover Roof Bottom 100 1000x600x100 mm 4 slabs 2,170 RUR/pack
Compare In comparison
Basalt wool Ecover Roof Bottom 100 1000x600x50 mm 8 slabs 2,170 RUR/pack
Compare In comparison
Basalt wool Ecover Roof Bottom 110 1000x600x100 mm 4 slabs 2,213 RUR/pack
Compare In comparison
Basalt wool Ecover Roof Bottom 110 1000x600x50 mm 8 slabs 2,213 RUR/pack
Compare In comparison
Basalt wool Ecover Roof Bottom 120 1000x600x100 mm 4 slabs 2,402 RUR/pack
Compare In comparison
Basalt wool Ecover Roof Bottom 120 1000x600x50 mm 6 slabs 1,801 RUR/pack
Compare In comparison
Basalt wool Ecover Light 30 1000x600x50 mm 12 slabs 836.70 RUR/pack
Compare In comparison
Basalt wool Ecover Light 30 1000x600x100 mm 6 slabs 1,004 RUR/pack
Compare In comparison
Basalt wool Ecover Roof Top 175 1000x600x50 mm 4 slabs 1,740 RUR/pack
Compare In comparison
Basalt wool Ecover Roof Top 175 1000x600x40 mm 7 slabs 2,437 RUR/pack
Compare In comparison
Basalt wool Ecover Roof Top 190 1000x600x50 mm 4 slabs 1,867 RUR/pack
Compare In comparison
Basalt wool Ecover Roof Top 190 1000x600x40 mm 7 slabs 2,614 RUR/pack
Compare In comparison
Basalt wool Ecover Roof Bottom 1000x600x100 mm 4 slabs 1,891 RUR/pack
Compare In comparison
Basalt wool Ecover Roof Bottom 1000x600x50 mm 8 slabs 1,891 RUR/pack
Compare In comparison
Basalt wool Ecover Roof Bottom 100 1000x600x100 mm 4 slabs 2,170 RUR/pack
Compare In comparison
Basalt wool Ecover Roof Bottom 100 1000x600x50 mm 8 slabs 2,170 RUR/pack
Compare In comparison
Basalt wool Ecover Roof Bottom 110 1000x600x100 mm 4 slabs 2,213 RUR/pack
Compare In comparison
Basalt wool Ecover Roof Bottom 110 1000x600x50 mm 8 slabs 2,213 RUR/pack
Compare In comparison
Basalt wool Ecover Roof Bottom 120 1000x600x100 mm 4 slabs 2,402 RUR/pack
Compare In comparison
Basalt wool Ecover Roof Bottom 120 1000x600x50 mm 6 slabs 1,801 RUR/pack
Compare In comparison
Basalt wool Ecover Light 30 1000x600x50 mm 12 slabs 836.70 RUR/pack
Compare In comparison
Basalt wool Ecover Light 30 1000x600x100 mm 6 slabs 1,004 RUR/pack
Compare In comparison
Basalt wool Ecover Roof Top 160 1000x600x40 mm 8 slabs 2,565 RUR/pack
Compare In comparison
Basalt wool Ecover Roof Top 175 1000x600x50 mm 4 slabs 1,740 RUR/pack
Compare In comparison
Basalt wool Ecover Roof Top 175 1000x600x40 mm 7 slabs 2,437 RUR/pack
Compare In comparison
Basalt wool Ecover Roof Top 190 1000x600x50 mm 4 slabs 1,867 RUR/pack
Compare In comparison
Basalt wool Ecover Roof Top 190 1000x600x40 mm 7 slabs 2,614 RUR/pack
Compare In comparison
Basalt wool Ecover Roof Bottom 1000x600x100 mm 4 slabs 1,891 RUR/pack
Compare In comparison
Basalt wool Ecover Roof Bottom 1000x600x50 mm 8 slabs 1,891 RUR/pack
Compare In comparison
Basalt wool Ecover Roof Bottom 100 1000x600x100 mm 4 slabs 2,170 RUR/pack
Compare In comparison
Basalt wool Ecover Roof Bottom 100 1000x600x50 mm 8 slabs 2,170 RUR/pack
Compare In comparison
Basalt wool Ecover Roof Bottom 110 1000x600x100 mm 4 slabs 2,213 RUR/pack
Compare In comparison
Basalt wool Ecover Roof Bottom 110 1000x600x50 mm 8 slabs 2,213 RUR/pack
Compare In comparison
Basalt wool Ecover Roof Bottom 120 1000x600x100 mm 4 slabs 2,402 RUR/pack
Compare In comparison
Basalt wool Ecover Roof Bottom 120 1000x600x50 mm 6 slabs 1,801 RUR/pack
Compare In comparison
Basalt wool Ecover Light 30 1000x600x50 mm 12 slabs 836.70 RUR/pack
Compare In comparison
Basalt wool Ecover Light 30 1000x600x100 mm 6 slabs 1,004 RUR/pack
Compare In comparison
Basalt wool Ecover Roof Top 190 1000x600x50 mm 4 slabs 1,867 RUR/pack
Compare In comparison
Basalt wool Ecover Roof Top 190 1000x600x40 mm 7 slabs 2,614 RUR/pack
Compare In comparison
Basalt wool Ecover Roof Bottom 1000x600x100 mm 4 slabs 1,891 RUR/pack
Compare In comparison
Basalt wool Ecover Roof Bottom 1000x600x50 mm 8 slabs 1,891 RUR/pack
Compare In comparison
Basalt wool Ecover Roof Bottom 100 1000x600x100 mm 4 slabs 2,170 RUR/pack
Compare In comparison
Basalt wool Ecover Roof Bottom 100 1000x600x50 mm 8 slabs 2,170 RUR/pack
Compare In comparison
Basalt wool Ecover Roof Bottom 110 1000x600x100 mm 4 slabs 2,213 RUR/pack
Compare In comparison
Basalt wool Ecover Roof Bottom 110 1000x600x50 mm 8 slabs 2,213 RUR/pack
Compare In comparison
Basalt wool Ecover Roof Bottom 120 1000x600x100 mm 4 slabs 2,402 RUR/pack
Compare In comparison
Basalt wool Ecover Roof Bottom 120 1000x600x50 mm 6 slabs 1,801 RUR/pack
Compare In comparison
Basalt wool Ecover Light 30 1000x600x50 mm 12 slabs 836.70 RUR/pack
Compare In comparison
Basalt wool Ecover Light 30 1000x600x100 mm 6 slabs 1,004 RUR/pack
Compare In comparison
Next 30
Next 30
- 120
Show by
- 120
- Contacts
- About company
- Brands
- Delivery
- Payment
- Purchase returns
- Privacy Policy
2021 Roofing and Insulation All rights reserved. The website ts-krovizol.ru is for informational purposes only and is not a public offer. For information on the cost of goods, please contact the sales department of the Roofing and Insulation company
Material advantages
The wide range of applicability of Ecover suggests the presence of positive characteristics:
- safety of technical indicators to temperature changes;
- resistance to the formation of fungi and mold;
- protection from ultraviolet rays;
- ease of installation;
- long period of operation (more than 50 years);
- reasonable cost;
- absence of foreign odors;
- wide choice of standard sizes.
Ecover light packaging
Ecover light is the optimal choice and practical solution for every home.
Advantages and disadvantages of Ecover products
Like any thermal insulation, Ecover slabs have their pros and cons. The advantages of the material include:
- non-flammability;
- high level of sound absorption;
- service life more than 50 years;
- ease of installation and ease of sawing;
- moisture resistance;
- resistance to UV rays;
- immunity to chemicals;
- resistance to fungi and mold;
- excellent level of vapor permeability due to the special fibrous structure of mineral wool;
- excellent compressive strength;
- naturalness and environmental friendliness;
- resistance to temperature changes with the ability to return to its original shape.
The only downside of the slabs is the high price, but it will also be justified if you remember the list of positive properties of the insulation. According to tests, just one slab with a thickness of 50 mm is similar in its ability to retain heat to a wooden block 18 cm thick, an aerated concrete block up to 30 cm thick, and reinforced concrete 2.5 meters thick.
In addition, insulation helps create a comfortable microclimate in the room with coolness in summer and cozy warmth in winter.
